afbinit (1.0-4) debian-dir only changes

--- afbinit-1.0.orig/debian/README.Debian
+++ afbinit-1.0/debian/README.Debian
@@ -0,0 +1,16 @@
+afbinit for Debian
+------------------
+
+This package requires the AFB microcode, which can be obtained from
+several places. The easiest way to have it is to grab a Solaris patch from
+Sun's website:
+
+1) go to http://sunsolve.sun.com/show.do?target=patches/patch-access
+2) search for patch number #108604 
+3) download it, decompress it 
+4) mv 108604-35/SUNWafbcf/reloc/lib/afb.ucode /usr/lib
+
+Once you have afb.ucode under /usr/lib, run the following command to
+load the microcode: /etc/init.d/afbinit start
+
+NOTE: The microcode is proprietary and NOT FREE. As in not free speech.
--- afbinit-1.0.orig/debian/afbinit.8
+++ afbinit-1.0/debian/afbinit.8
@@ -0,0 +1,83 @@
+.\" This -*- nroff -*- file has been generated from
+.\" DocBook SGML with docbook-to-man on Debian GNU/Linux.
+.de P!
+\\&.
+.fl			\" force out current output buffer
+\\!%PB
+\\!/showpage{}def
+\\!/tempdict 200 dict def tempdict begin
+.fl			\" prolog
+.sy cat \\$1\" bring in postscript file
+\\!end % tempdict %
+\\!PE
+\\!.
+.sp \\$2u	\" move below the image
+..
+.de pF
+.ie     \\*(f1 .ds f1 \\n(.f
+.el .ie \\*(f2 .ds f2 \\n(.f
+.el .ie \\*(f3 .ds f3 \\n(.f
+.el .ie \\*(f4 .ds f4 \\n(.f
+.el .tm ? font overflow
+.ft \\$1
+..
+.de fP
+.ie     !\\*(f4 \{\
+.	ft \\*(f4
+.	ds f4\"
+'	br \}
+.el .ie !\\*(f3 \{\
+.	ft \\*(f3
+.	ds f3\"
+'	br \}
+.el .ie !\\*(f2 \{\
+.	ft \\*(f2
+.	ds f2\"
+'	br \}
+.el .ie !\\*(f1 \{\
+.	ft \\*(f1
+.	ds f1\"
+'	br \}
+.el .tm ? font underflow
+..
+.ds f1\"
+.ds f2\"
+.ds f3\"
+.ds f4\"
+'\" t 
+.ta 8n 16n 24n 32n 40n 48n 56n 64n 72n  
+.TH "AFBINIT" "8" 
+.SH "NAME" 
+afbinit \(em Initialize the AFB microcode for Elite 3D framebuffer cards 
+.SH "SYNOPSIS" 
+.PP 
+\fBafbinit\fP /dev/fb[0123] [ucode_file]  
+.SH "DESCRIPTION" 
+.PP 
+This manual page documents briefly the 
+\fBafbinit\fP command. 
+.PP 
+This manual page was written for the \fBDebian GNU/Linux\fP distribution 
+because the original program does not have a manual page. 
+ 
+.PP 
+The \fBafbinit\fP command is used to initialize 
+Elite 3D framebuffers with the AFB microcode that is required to use 
+the accelration functions under XFree86. You need only tell it which 
+framebuffer to use it on, and where the afb.ucode file is (if not in 
+the default location). 
+ 
+.SH "FILES" 
+.PP 
+\fB/usr/lib/afb.ucode\fP
+.PP 
+\fB/etc/init.d/afbinit\fP
+.SH "AUTHOR" 
+.PP 
+This manual page was written by Ben Collins bcollins@debian.org for 
+the \fBDebian GNU/Linux\fP system (but may be used by others).  Permission is 
+granted to copy, distribute and/or modify this document under 
+the terms of the GNU Free Documentation 
+License, Version 1.1 or any later version published by the Free 
+Software Foundation; with no Invariant Sections, no Front-Cover 
+Texts and no Back-Cover Texts. 
--- afbinit-1.0.orig/debian/compat
+++ afbinit-1.0/debian/compat
@@ -0,0 +1 @@
+5
--- afbinit-1.0.orig/debian/control
+++ afbinit-1.0/debian/control
@@ -0,0 +1,17 @@
+Source: afbinit
+Section: contrib/utils
+Priority: optional
+Maintainer: Emanuele Rocca <ema@debian.org>
+Build-Depends: debhelper (>= 5.0.0)
+Standards-Version: 3.7.3
+
+Package: afbinit
+Architecture: sparc
+Depends: ${shlibs:Depends}
+Description: Elite 3D Framebuffer firmware initializer
+ The package provides a program that can initialize the microcode firmware
+ on an Elite 3D framebuffer card found on many UltraSPARC systems. This is
+ needed if you want to support acceleration under XFree86 for this card.
+ .
+ NOTE: This program requires that you obtain the proprietary microcode.
+ Please see the README.Debian for more information.
--- afbinit-1.0.orig/debian/afbinit.init
+++ afbinit-1.0/debian/afbinit.init
@@ -0,0 +1,62 @@
+#!/bin/sh
+#
+# Initialize Elite 3D Framebuffer firmware
+
+### BEGIN INIT INFO
+# Provides:          afbinit
+# Required-Start:    $local_fs $remote_fs
+# Required-Stop:    
+# Default-Start:     S 
+# Default-Stop:      
+# Short-Description: Elite 3D Framebuffer firmware initializer
+# Description:       afbinit initializes the microcode firmware
+#                    needed by Elite 3D framebuffer cards found on many
+#                    UltraSPARC systems
+### END INIT INFO
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+set -e
+
+. /lib/lsb/init-functions
+
+# This only applies to UltraSPARC's
+if [ `uname -m` != "sparc64" ];then
+    log_failure_msg "The architecture is not sparc64"
+    exit 0
+fi
+
+# The microcode loader binary and the microcode itself must exist.
+if [ ! -x /usr/sbin/afbinit ];then
+    log_failure_msg "Cannot find afbinit (/usr/sbin/afbinit)"
+	exit 1
+fi
+if [ ! -f /usr/lib/afb.ucode ];then
+    log_failure_msg "Cannot find AFB microcode (/usr/lib/afb.ucode)"
+    log_failure_msg "Please read /usr/share/doc/afbinit/README.Debian to see how to obtain it"
+    exit 0
+fi
+
+case "$1" in
+  start)
+	# Make FB device list.
+	afb_devs=$(awk '/Elite/ {printf "fb%d\n",$1}' /proc/fb)
+	[ -n "${afb_devs}" ] || exit 0
+
+	# Load microcode onto each card.
+    log_begin_msg "Loading Elite3D microcode on: "
+	for AFB in ${afb_devs}; do
+		log_begin_msg ${AFB}
+		/usr/sbin/afbinit /dev/${AFB} /usr/lib/afb.ucode > \
+            /dev/null
+        log_end_msg $?
+	done
+	;;
+  stop|restart|force-reload) # Nothing
+	;;
+  *)
+	log_success_msg "Usage: /etc/init.d/afbinit start"
+	exit 1
+	;;
+esac
+
+exit 0
--- afbinit-1.0.orig/debian/rules
+++ afbinit-1.0/debian/rules
@@ -0,0 +1,43 @@
+#!/usr/bin/make -f
+
+build: build-stamp
+build-stamp:
+	dh_testdir
+	$(MAKE)
+	touch build-stamp
+
+clean:
+	dh_testdir
+	dh_testroot
+	rm -f build-stamp
+	$(MAKE) clean
+	dh_clean
+
+install: build
+	dh_testdir
+	dh_testroot
+	dh_clean -k
+	dh_installdirs
+	install -m755 afbinit $(CURDIR)/debian/afbinit/usr/sbin/afbinit
+
+binary-indep: build install
+
+binary-arch: build install
+	dh_testdir
+	dh_testroot
+	dh_installdocs
+	dh_installinit -r -u"start 50 S ."
+	dh_installman debian/afbinit.8
+	dh_installchangelogs 
+	dh_strip
+	dh_compress
+	dh_fixperms
+	dh_installdeb
+	dh_shlibdeps
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb
+
+binary: binary-arch
+
+.PHONY: build clean install binary-indep binary-arch binary 
--- afbinit-1.0.orig/debian/changelog
+++ afbinit-1.0/debian/changelog
@@ -0,0 +1,55 @@
+afbinit (1.0-4) unstable; urgency=low
+
+  * Do not fail if microcode is unavailable (Closes: #466106)
+  * Improve instructions about how to get microcode in README.Debian
+  * Fix man page errors
+  * Bump Standards-Version
+  * Thanks to Adam Cécile for his suggestions
+
+ -- Emanuele Rocca <ema@debian.org>  Wed, 20 Feb 2008 13:17:04 +0100
+
+afbinit (1.0-3) unstable; urgency=low
+
+  * Add missing includes (Closes: #451635)
+  * Remove 'Local variables' from debian/changelog
+
+ -- Emanuele Rocca <ema@debian.org>  Sun, 18 Nov 2007 11:17:37 +0100
+
+afbinit (1.0-2) unstable; urgency=low
+
+  * New maintainer
+  * debian/afbinit.init: 
+    - card recognition code modified to work properly with 2.6 kernels
+      (Closes: #250619)
+    - redirect afbinit standard output to /dev/null
+    - use LSB init-functions
+    - add LSB keyword section
+  * debian/rules: 
+    - run init script after mountall (Closes: #282955)
+    - do not ignore errors in the clean target
+    - binary-arch and binary-indep targets added
+  * debian/control: 
+    - Standards-Version set to 3.7.2
+    - set myself as the maintainer
+  * debian/copyright: 
+    - Author(s) replaced with Author
+    - added pointer to /usr/share/common-licenses/GPL-2
+  * debian/README.Debian, debian/afbinit.8:
+    - s/afb/afbinit/
+
+ -- Emanuele Rocca <ema@debian.org>  Sun, 08 Jul 2007 13:27:18 +0200
+
+afbinit (1.0-1.1) unstable; urgency=low
+
+  * Non Maintainer Upload.
+  * Change the mmap() of the card's registers to use MAP_SHARED instead
+    of MAP_PRIVATE. Closes: #346085.
+  * Update debhelper compatibitily to version 5.
+
+ -- Frans Pop <fjp@debian.org>  Wed,  1 Feb 2006 14:20:57 +0100
+
+afbinit (1.0-1) unstable; urgency=low
+
+  * Initial Release.
+
+ -- Ben Collins <bcollins@debian.org>  Thu, 29 Nov 2001 21:06:42 -0500
--- afbinit-1.0.orig/debian/copyright
+++ afbinit-1.0/debian/copyright
@@ -0,0 +1,12 @@
+This package was debianized by Ben Collins <bcollins@debian.org> on
+Thu, 29 Nov 2001 21:06:42 -0500.
+
+It was downloaded from http://vger.samba.org/ CVS.
+
+Upstream Author: David S. Miller (davem@redhat.com)
+
+Copyright (C) 1999 David S. Miller (davem@redhat.com)
+
+License:
+This software is released under the terms of the GNU GPL v2, which can
+be found in `/usr/share/common-licenses/GPL-2' on Debian systems.
--- afbinit-1.0.orig/debian/dirs
+++ afbinit-1.0/debian/dirs
@@ -0,0 +1 @@
+usr/sbin