--- drawmap-2.5.orig/debian/dirs
+++ drawmap-2.5/debian/dirs
@@ -0,0 +1,2 @@
+usr/bin
+usr/share/doc/drawmap/html
--- drawmap-2.5.orig/debian/docs
+++ drawmap-2.5/debian/docs
@@ -0,0 +1 @@
+README
--- drawmap-2.5.orig/debian/control
+++ drawmap-2.5/debian/control
@@ -0,0 +1,27 @@
+Source: drawmap
+Section: math
+Priority: optional
+Maintainer: Debian GIS Project <pkg-grass-devel@lists.alioth.debian.org>
+Uploaders: Francesco Paolo Lovergine <frankie@debian.org>
+Build-Depends: debhelper (>>5), groff, dpatch
+Standards-Version: 3.7.2
+
+Package: drawmap
+Architecture: any
+Depends: ${shlibs:Depends}
+Description: draws customized maps, using raw USGS data files
+ Drawmap reads data in the Digital Elevation Model (DEM),
+ Digital Line Graph (DLG), and Geographic Names Information
+ System (GNIS) formats. Can also work with SDTS, NAD-83,
+ WGS-84, GTOPO30 data.
+ .
+ Using the data in these files, drawmap can produce various
+ kinds of customized maps, including shaded relief maps
+ (with or without roads, streams, place names, and so on)
+ and topographic maps (again, with or without additional
+ features).
+ .
+ Outputs sun raster format, portable gray map, or pov format
+ files.
+ .
+ Home page: http://www.ttc-cmc.net/~fme/drawmap.html
--- drawmap-2.5.orig/debian/rules
+++ drawmap-2.5/debian/rules
@@ -0,0 +1,50 @@
+#!/usr/bin/make -f
+# Sample debian/rules that uses debhelper.
+# GNU copyright 1997 to 1999 by Joey Hess.
+
+# Uncomment this to turn on verbose mode.
+# export DH_VERBOSE=1
+
+include /usr/share/dpatch/dpatch.make
+
+build: build-stamp
+build-stamp: patch-stamp
+ dh_testdir
+
+ $(MAKE) CFLAGS=-O2
+
+ touch build-stamp
+
+clean: clean1 unpatch
+clean1:
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp
+
+ -$(MAKE) clean
+
+ dh_clean
+
+# Build architecture-independent files here.
+binary-indep: build
+# We have nothing to do by default.
+
+# Build architecture-dependent files here.
+binary-arch: build
+ dh_installdirs
+ dh_installdocs
+ dh_install
+ dh_installman *.1n
+ dh_installchangelogs
+ dh_strip
+ dh_compress
+ dh_fixperms
+ dh_installdeb
+ dh_shlibdeps
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+
+binary: binary-indep binary-arch
+.PHONY: build clean clean1 binary-indep binary-arch binary install \
+ patch unpatch
--- drawmap-2.5.orig/debian/changelog
+++ drawmap-2.5/debian/changelog
@@ -0,0 +1,81 @@
+drawmap (2.5-3) unstable; urgency=low
+
+ * New maintainership team. Set me as uploader.
+ (closes: #361015)
+ * Policy bumped to 3.7.2 (no changes)
+ * Debhelper level moved to 5
+ * Added home page in long description
+ * Added patch 03_misc_warns.dpatch to avoid silly warnings due to missing headers.
+ * Now using -02 optimization in debian/rules.
+ * Removed superfluous dh_ rules.
+
+ -- Francesco Paolo Lovergine <frankie@debian.org> Fri, 18 May 2007 15:02:34 +0200
+
+drawmap (2.5-2) unstable; urgency=low
+
+ * QA Upload
+ * Set Maintainer to QA Group
+ * Integrate NMU Patches with dpatch (Closes: #327475)
+ + Build-Depend on Dpatch
+ * clean up debian/rules
+ * Upgrade Standards Version
+
+ -- Michael Ablassmeier <abi@debian.org> Fri, 28 Apr 2006 09:40:19 +0200
+
+drawmap (2.5-1.1) unstable; urgency=low
+
+ * BSP NMU
+ * Fix FTBFS with gcc-4.0 due to source conflict with library functions
+ (drawmap.h) and labels at end of case statement (dlg.c).
+ (Closes: #258622). Thanks to Andreas Jochens for the patch.
+ * Upgrade from debhelper 2 to 4.
+
+ -- Hamish Moffatt <hamish@debian.org> Sat, 10 Sep 2005 21:51:47 +1000
+
+drawmap (2.5-1) unstable; urgency=low
+
+ * New upstream release closes: Bug#219081
+ * See /usr/share/doc/drawmap/WHATS_NEW for list of upstream modifications
+
+ -- James W. Penny <jpenny@debian.org> Thu, 6 Nov 2003 22:43:00 -0500
+
+drawmap (2.3-1) unstable; urgency=low
+
+ * New upstream release
+ * See /usr/share/doc/drawmap/WHATS_NEW for list of upstream modifications
+ * drawmapcc is deprecated, upstream's solution is better
+
+ -- James W. Penny <jpenny@debian.org> Mon, 12 Feb 2001 22:43:32 -0500
+
+drawmap (2.2-1) unstable; urgency=low
+
+ * New maintainer, new upstream version
+ * Added drawmapcc
+ * new documentation (/usr/share/doc/index.html)
+
+ -- James Penny (Midway, Kentucky) (No Comment) <jpenny@universal-fasteners.com> Tue, 2 Jan 2001 23:58:17 -0500
+
+drawmap (1.7-1) unstable; urgency=low
+
+ * New upstream version
+
+ -- John Lapeyre <lapeyre@physics.arizona.edu> Tue, 30 Mar 1999 16:06:39 -0700
+
+drawmap (1.3-2) unstable; urgency=low
+
+ * Remove hard coded egcc use.
+
+ -- John Lapeyre <lapeyre@physics.arizona.edu> Tue, 22 Sep 1998 21:33:19 -0700
+
+drawmap (1.3-1) unstable; urgency=low
+
+ * Initial Release.
+
+ -- John Lapeyre <lapeyre@physics.arizona.edu> Tue, 18 Aug 1998 04:01:47 -0700
+
+
+
+Local variables:
+mode: debian-changelog
+add-log-mailing-address "jpenny@universal-fasteners.com"
+End:
--- drawmap-2.5.orig/debian/index.html
+++ drawmap-2.5/debian/index.html
@@ -0,0 +1,270 @@
+<html>
+<head>
+<title>Drawmap Usage
+</title>
+</head>
+<body>
+
+<h2>See the man page</h2>
+<p>Be sure to read <strong>man drawmap</strong>. It is very good!</p>
+
+<h2>Why this document has no images</h2>
+
+<p>
+The binary .deb is about 200 kilobytes. Example data files that were
+used in testing and post processing were about 300 kilobytes. Images
+come in at about 60 kiloytes each, and to do a thorough job, I need about
+ten such images. Inclusion of test data and intermediary images would
+require about 900 kilobytes. It seems wasteful to bloat the package
+this much!
+
+<h2>Sources of data files</h2>
+
+<p>
+There are several types of input files that drawmap processes. The
+primary ones are Digital Elevation Maps (DEM), and Digital Line Maps (DLG).
+DEM files contain topographical information. DLG files contain information
+about features such as roads, streams, lakes and ponds. Drawmap can also
+process Geographical Name Information Service (GNIS) files. These files
+contain location of place name information. Drawmap can in fact read
+several other input file types, see the man page.
+
+<p>The primary source of suitable DEM and DLG datafiles for the U.S.A. is
+<a href=http://edc.usgs.gov/doc/edchome/ndcdb/ndcdb.html>
+http://edc.usgs.gov/doc/edchome/ndcdb/ndcdb.html
+</a>. Both the 1:250,000 and 1:24,000 are suitable for drawmap.
+If you are using acquiring data for the first time, you should
+look at the links labelled FTP by Graphics. These show the rectangle
+that each data file describes and gives you a very quick way of judging
+just how much you will need to get.
+</p>
+
+<p>These data files tend to be moderately large. The 1:24,000 DEM file
+describing Midway, Kentucky is 160 kilobytes, compressed. The hydrology DLG
+file is 143 kilobytes, compressed. </p>
+
+<p>
+The primary download site for U.S. GNIS data is:
+<a href=http://mapping.usgs.gov/www/gnis/gnisftp.html>
+http://mapping.usgs.gov/www/gnis/gnisftp.html
+</a>.
+There are two formats for GNIS data on the USGS site, one is
+in Quote and Comma Delimited form, and one is in Columnar form.
+I have given examples in the Quote and Columnar form, because
+I find it easier to use standard tools like egrep and text editors
+in this form. Quote and Comma Delimited files have _deci as part
+of their name.
+GNIS files are ordinary text files. Each line is self contained,
+and so, it is perfectly safe to use grep to select the region you
+are working with, and then hand edit the output with your favorite
+text editor. For example, I have been using the Midway section of Kentucky.
+To find only the Midway data, I can simply <br>
+egrep \"Midway$\" KY_deci > KY_deci_Midway
+</p>
+
+<p>These data files have two uses for us. First, they mark place-names
+on the map, features like cities, villages, mountain names, rivers, isolated
+churches, etc. They also allow us to mark features on our own. For example,
+the low point of the Midway data is at 38.248N 84.7414 West. By adding a
+line that reads:<br>
+<pre>
+"KY","Low Pt","locale","Woodford","21","239","381250N","0847500W","38.24800","-84.74140","","","","","789","1805","Midway"
+</pre>
+to the GNIS data, the area's low point can be labelled. Note that coordinates
+are repeated twice, once in a degrees/minutes/seconds format, and once in
+ decimal format. (And that the data I show is not consistent!) Drawmap
+uses the decimal format to place features. East of the 0 meridian and
+north of the equator are positive, west and south are negative.
+
+<h2>Limitations of the Program</h2>
+
+<p>DLG data and DEM data are not congruent. DLG data produces an exactly
+rectangular patch. The projection produced by DEM data is more or less skewed,
+depending on how far from the equator you are.
+This is really quite annoying when working with hydrology data on the
+1:24,000 scale. Streams may show up on the sides of hills, rather than in
+flood plains!
+This can be repaired by post processing.
+
+<p>Fonts are not attractive. Again, this is easily repaired by post processing.
+
+<p>See the new -C option to draw contour maps with color bands.
+
+<p>Political data, such as border lines are not available in a usable
+format, as far as I know.
+
+<h2>Post processing</h2>
+
+<p>Here are some hints on using the GIMP as a drawmap postprocessor.
+I have previously obtained the Midway, Kentucky 1:24,000 DEM map,
+which is stored ~/maps/dem/midway/9780CELO.DDF (there are other items in
+the DEM data, but drawmap uses only the ...CEL.... file), the hydrology
+DLG map store in ~/maps/midway/hydrology/HY01LE01.DDF (again, there are
+multiple files in the directory, drawmap uses only the ....LE.... file), and
+the Kentucky GNIS data, stored in ~/maps/gnis/KY_deci. I used <br>
+egrep "Midway\"$" ~/maps/gnis/KY_deci >~/maps/gnis/KY_deci.Midway<br>
+to select the portion of the GNIS data relevant to the Midway patch.
+
+
+<p>First, you want to draw many layers. Drawmap will automatically
+overlay data for you. Do not use this feature, especially if you are
+using a combination of DEM and DLG data! Instead, use drawmap to build
+each layer separately and GIMP to manipulate and the combine the layers.
+
+<p>Because there are a lot of steps and I do not want to bloat this
+package by including a bunch of images, I am going to describe, rather
+than show, the process
+of building a custom "3-d effect" contour map with hydrology and feature
+labels. This should be enough for you to see how to use most of drawmap's
+capabilities to produce a good map.
+
+<p>First, produce the basic contour map. I want color contours, but I don't
+want them so tight that they are jarring. This is a matter of taste,
+rather than science. For me, a 25 meter contour works well. Use
+drawmap to build it by:<br>
+drawmap -C 25 -d ~/maps/dem/9780CEL0.DDF<br>
+
+<p>This builds file drawmap.sun in your current working directory. Start up
+the GIMP. Open this file. Note that there is an information block at
+the top. In my case, it reads:
+
+<pre>
+ MIDWAY, KY - 24000 --- 38.125N, 84.75W to 38.25N, 84.625W
+Elevations: 681m (2234ft) at 38.248N 84.7414W, 924m (3031ft) at 38.13N 84.7147W
+</pre>
+
+This information will e needed in the next step.
+
+<p>But first, to complete this step, convert the image to RGB using
+right-click/Image/Mode/RGB.
+
+<p>Now start another drawmap run, to produce the depth data. I used
+<pre>
+drawmap -h -d ~/maps/dem/9780CEL0.DDF
+</pre>
+
+
+Be sure to note the pixel size
+this map produces, in my example x-width=376 and y-height=471 pixels.
+
+<p>This command should produce two files in your current working directory,
+drawmap.pgm and drawmap.pov. Drawmap.pov is suitable for input to the point
+of view ray tracer (povray). Usage of this file is beyond the scope of this
+document. Drawmap.pgm is a portable graymap file. Regions of lower elevation
+are deeper gray than those of higher elevation. This is just what is needed
+for the GIMP bump-map tool!
+
+<p>Open drawmap.pgm in another GIMP window. Select all (cntl-a), and copy
+(cntl-c). Go back to your GIMP window containing drawmap.sun. Right click
+and select Layers/Layers, Channels & Paths. In the Layer, Channels & Paths
+window right-click and select New Layer (or press cntl-n). The layer size
+is fine, but make sure that you select Transparent Layer Fill Type. Now
+return to your drawmap.sun window and paste the drawmap.pgm data into this
+new layer (cntl-v). You will find that the pasted map does not quite overlay
+the drawmap.sun image. Drag it until it exactly overlays the older image.
+
+<p>Now anchor the drawmap.pgm image (cntl-h). Finally, you are ready to
+give texture to your map. Right-click, select Filters/Map/Bump Map. You
+want Linear Map, and probably Compensate for Darkening. Azimuth controls
+the source of the virtual sun, with 0 corresponding to due East, 180 to due
+West. You should experiment with Elevation and Depth to get a satisfactory
+illusion of depth.
+
+<p>Back in the Layers, Channels & Colors box, select Mode Value or Mode Overlay.Either should
+result in a nice colored contour map, the colors coming from the bottom layer,
+and the illusion of depth coming from the bump-mapped layer. Value will
+emphasize the bump-map layer, and overlay will emphasize the contour.
+
+<p>Now we go back to drawmap to build a line graph map. The only one available
+from USGS for Midway is the hydrology map, which shows stream and ponds.
+drawmap needs either a DEM map or explicit boundaries to work with DLG
+maps. As mentioned earlier, if you use a DLG map directly on a DEM map,
+the result is inaccurate due to coordinate issues. So, we are forced to
+give direct coordinates, in my example, I run
+<pre>
+drawmap -x 376 -y 471 -l 38.125,-84.75,38.25,-84.625 ~/maps/dlg/HY01LE01.DDF -o hydro.sun
+</pre>
+The x and y dimensions came from the drawmap's report on the pgm file, the
+other dimensions come from the information block in the original drawmap.sun
+file, with North and East positive.
+
+<p>Open hydro.sun, copy it and paste it into a new layer of our composite
+drawing. If you look carefully, you will see a cut marks that frame the
+map we just produced. Drag guide lines to the inside of these cut marks.
+Once the guide lines are in place, use the Rectangular Selection tool to
+select the rectangle formed by these guide lines. Invert the region
+(cntl-i) and clear it (cntl-k). At his point, I am going to clear the rest
+of the white pixels of this layer away using right-click, Select/Select
+by Color, selecting any white pixel and pressing cntl-k. I find it easier
+to shear before scaling. Both vertical shear and horizontal shear are needed.
+It is easier to see what you are doing if you first select the rectangle
+delimited by the guide lines placed earlier. You may shear either horizontally
+or vertically first, just to make this paragraph easier to write, I will
+assume you shear horizontally first, To do this,
+select the Rotation, shearing, scaling,
+perspective tool, and click on the shearing radio-button in the Tool Option box.
+Now in our picture click on any point of the selected rectangle. You should
+now get a grid with the four corners contained in small boxes. Select one of
+the corners and drag it left or right until the vertical lines of the grid are
+parallel to the edges of the DEM data. Press Shear. Then do the same for
+the vertical dimension by choosing one of the boxes and moving it up or down.
+
+<p>The GIMP shears about the center point of the selected area. This moves
+the corners of the sheared area away from the corners of the original
+rectangle. You need to Select by Color the sheared data, and then move it
+so that one corner of the sheared data lies on a corner of the DEM data.
+
+<p>Now, you will find that the sheared data is too large. Use the Rotation,
+shearing, scaling and perspective tool again, this time in scaling mode.
+Drag the corner opposite the one that you chose in the previous step onto
+the corresponding DEM data. You maps should now be congruent to within
+a pixel or two.
+
+<p>This sounds really complicated, but in practice, can be done in two or
+three minutes, and it results in a vast improvement in the map!
+
+<p>Finally, we will use the GNIS data to label some place names on the map.
+Do you need to go through all of the rigamarole of the previous step to
+place the markers? In principle, yes. Realistically, this data is marking
+locales, and if you do not have any hydrological or transportation data
+on your map, then you can probably avoid it. Since this example does have
+such data, it is necessary to go through the distortion process again.
+
+<p>In one particular, this is actually a bit harder to do than the previous
+example indicated. Earlier, a Select By Color was done to highlight the
+rectangle being affected. Also, we had to align a point of the DLG data
+with a point of the DEM data. In this case, the reference points will
+probably not exist, and so must be added before processing proceeds.
+
+<p>For my map, the common points are the upper left hand and lower
+right hand corners. Use the cut marks to place guidelines around the
+figure. Select a 1-pixel brush and use the Draw Tool to build a little
+mark for the upper left and lower right corners. Select and clear so
+you can see underlying elements. Do the Shear, Shear, Move,
+Scale shuffle, as before.
+
+<p>This will distort both the text and the some of the markers. The text
+is no particular loss, GIMP fonts are much better than drawmap fonts anyway!
+Simply erase the current labels and replace them with nice GIMP Text Tool
+supplied ones. Because the markers are small, they will mostly remain
+undistorted, and any distortion is probably only one pixel. Either ignore
+it, or fix it using the draw tool.
+
+<p>Now, you should have a really accurate, colorful map. I would provide
+a screen shot, but since the image of the map is about the same size as the
+entire binary package, it seems wasteful to do so.
+
+<h2>Concluding Remarks</h2>
+
+<p>If you find any of this confusing, have corrections, or other requests,
+email me at jpenny@debian.org.
+
+<p>If you find other sources for data that work with drawmap, especially non-US
+data, please let me know so that I can give appropriate links.
+
+<p>
+Thanks<br>
+Jim Penny
+
+</body>
+</html>
--- drawmap-2.5.orig/debian/compat
+++ drawmap-2.5/debian/compat
@@ -0,0 +1 @@
+5
--- drawmap-2.5.orig/debian/README.Debian
+++ drawmap-2.5/debian/README.Debian
@@ -0,0 +1,10 @@
+drawmap for Debian
+----------------------
+Upstream has made major improvements in shading and has implemented
+color banded contours. Upstream's method of doing this is better
+than drawmapcc, so drawmapcc is replaced by a script which calls
+drawmap. drawmapcc will be removed in the next release.
+
+The man pages are very good. Read them!
+
+ -- James W. Penny (Midway, Kentucky) <jpenny@debian.org>
--- drawmap-2.5.orig/debian/patches/03_misc_warns.dpatch
+++ drawmap-2.5/debian/patches/03_misc_warns.dpatch
@@ -0,0 +1,95 @@
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 03_misc_warns.dpatch by Francesco Paolo Lovergine <frankie@debian.org>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: No description.
+
+@DPATCH@
+diff -urNad drawmap~/big_buf_io.c drawmap/big_buf_io.c
+--- drawmap~/big_buf_io.c 2007-05-18 14:49:27.000000000 +0200
++++ drawmap/big_buf_io.c 2007-05-18 14:51:34.000000000 +0200
+@@ -48,6 +48,7 @@
+
+ #include <sys/types.h>
+ #include <fcntl.h>
++#include <string.h>
+
+ int buf_open(const char *, int, mode_t, ...);
+ int buf_close(int);
+diff -urNad drawmap~/big_buf_io_z.c drawmap/big_buf_io_z.c
+--- drawmap~/big_buf_io_z.c 2007-05-18 14:49:27.000000000 +0200
++++ drawmap/big_buf_io_z.c 2007-05-18 14:51:34.000000000 +0200
+@@ -45,6 +45,7 @@
+
+ #include <sys/types.h>
+ #include <fcntl.h>
++#include <string.h>
+ #include "gzip.h"
+
+ int buf_open_z(const char *, int, mode_t, ...);
+diff -urNad drawmap~/dem.c drawmap/dem.c
+--- drawmap~/dem.c 2001-08-02 08:27:39.000000000 +0200
++++ drawmap/dem.c 2007-05-18 14:53:14.000000000 +0200
+@@ -22,6 +22,7 @@
+ #include <stdlib.h>
+ #include <stdio.h>
+ #include <math.h>
++#include <string.h>
+ #include "drawmap.h"
+ #include "dem.h"
+
+diff -urNad drawmap~/dlg.c drawmap/dlg.c
+--- drawmap~/dlg.c 2007-05-18 14:51:33.000000000 +0200
++++ drawmap/dlg.c 2007-05-18 14:54:31.000000000 +0200
+@@ -25,6 +25,7 @@
+ #include <unistd.h>
+ #include <stdio.h>
+ #include <errno.h>
++#include <string.h>
+ #include "drawmap.h"
+ #include "dlg.h"
+
+diff -urNad drawmap~/gzip.h drawmap/gzip.h
+--- drawmap~/gzip.h 1998-10-12 07:39:28.000000000 +0200
++++ drawmap/gzip.h 2007-05-18 14:56:00.000000000 +0200
+@@ -29,6 +29,7 @@
+ * too often
+ */
+ #include <stdio.h>
++#include <stdlib.h>
+ #if !defined(NO_STRING_H) || defined(STDC_HEADERS)
+ # include <string.h>
+ # if !defined(STDC_HEADERS) && !defined(NO_MEMORY_H) && !defined(__GNUC__)
+diff -urNad drawmap~/ll2utm.c drawmap/ll2utm.c
+--- drawmap~/ll2utm.c 2000-07-22 11:54:53.000000000 +0200
++++ drawmap/ll2utm.c 2007-05-18 14:57:03.000000000 +0200
+@@ -30,6 +30,7 @@
+
+ #include <stdio.h>
+ #include <stdlib.h>
++#include <math.h>
+ #include <sys/types.h>
+ #include "drawmap.h"
+
+diff -urNad drawmap~/unblock_dem.c drawmap/unblock_dem.c
+--- drawmap~/unblock_dem.c 2007-05-18 14:49:27.000000000 +0200
++++ drawmap/unblock_dem.c 2007-05-18 14:51:34.000000000 +0200
+@@ -27,6 +27,7 @@
+ */
+ #include <stdio.h>
+ #include <sys/types.h>
++#include <stdlib.h>
+ #include "drawmap.h"
+ #include "dem.h"
+
+diff -urNad drawmap~/unblock_dlg.c drawmap/unblock_dlg.c
+--- drawmap~/unblock_dlg.c 2007-05-18 14:49:27.000000000 +0200
++++ drawmap/unblock_dlg.c 2007-05-18 14:51:34.000000000 +0200
+@@ -27,6 +27,7 @@
+ */
+ #include <stdio.h>
+ #include <sys/types.h>
++#include <stdlib.h>
+ #include "drawmap.h"
+ #include "dlg.h"
+
--- drawmap-2.5.orig/debian/patches/01_drawmap.h.dpatch
+++ drawmap-2.5/debian/patches/01_drawmap.h.dpatch
@@ -0,0 +1,17 @@
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 01_drawmap.dpatch
+##
+## DP: Fix build issue
+
+@DPATCH@
+
+--- drawmap-2.5.orig/drawmap.h
++++ drawmap-2.5/drawmap.h
+@@ -196,6 +196,7 @@
+
+
+
++#define round(x) lround(x) /* avoid type conflict with built-in function */
+ long round(double);
+ long max(long, long);
+ double max3(double, double, double);
--- drawmap-2.5.orig/debian/patches/02_dlg.c.dpatch
+++ drawmap-2.5/debian/patches/02_dlg.c.dpatch
@@ -0,0 +1,37 @@
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 01_drawmap.dpatch
+##
+## DP: Fix build issue
+
+@DPATCH@
+
+--- drawmap-2.5.orig/dlg.c
++++ drawmap-2.5/dlg.c
+@@ -1156,25 +1156,17 @@
+ if (pointflags & 1) {
+ latitude2 = p_lat1;
+ longitude2 = image_corners->sw_long;
+- goto DONE2;
+- }
+- if (pointflags & 2) {
++ } else if (pointflags & 2) {
+ latitude2 = p_lat2;
+ longitude2 = image_corners->ne_long;
+- goto DONE2;
+- }
+- if (pointflags & 4) {
++ } else if (pointflags & 4) {
+ latitude2 = image_corners->sw_lat;
+ longitude2 = p_long1;
+- goto DONE2;
+- }
+- if (pointflags & 8) {
++ } else if (pointflags & 8) {
+ latitude2 = image_corners->ne_lat;
+ longitude2 = p_long2;
+- goto DONE2;
+ }
+ }
+-DONE2:
+ }
+
--- drawmap-2.5.orig/debian/patches/00list
+++ drawmap-2.5/debian/patches/00list
@@ -0,0 +1,3 @@
+01_drawmap.h
+02_dlg.c
+03_misc_warns
--- drawmap-2.5.orig/debian/copyright
+++ drawmap-2.5/debian/copyright
@@ -0,0 +1,19 @@
+This package was debianized by James W. Penny <jpenny@debian.org>
+Tue, 2 Jan 2001 23:58:17 -0500.
+
+It was downloaded from:
+http://www.ttc-cmc.net/~fme/drawmap-2.5.tar.gz
+
+Upstream Author: Fred M. Erickson <fme@ttc-cmc.net>
+
+Copyright:
+
+(c) Copyright 2001 Fred M. Erickson. All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+Full text of the license may be found, on a Debian system, in the file
+/usr/share/common-licenses/GPL-2.
--- drawmap-2.5.orig/debian/doc-base
+++ drawmap-2.5/debian/doc-base
@@ -0,0 +1,12 @@
+Document: drawmap
+Title: Drawmap Usage Hints
+Author: James Penny
+Abstract: This document provides some of the sources
+ for drawmap compatible data files and some hints on
+ using Gimp to post process and thereby improve
+ drawmap generated maps.
+Section: Math
+
+Format: HTML
+Index: /usr/share/doc/drawmap/html/index.html
+Files: /usr/share/doc/drawmap/html/*.html
--- drawmap-2.5.orig/debian/install
+++ drawmap-2.5/debian/install
@@ -0,0 +1,8 @@
+drawmap usr/bin/
+ll2utm usr/bin/
+unblock_dlg usr/bin/
+unblock_dem usr/bin/
+llsearch usr/bin/
+sdts2dem usr/bin/
+sdts2dlg usr/bin/
+debian/index.html /usr/share/doc/drawmap/html
![[patchlogo]](http://patch-tracker.debian.org/static/img/swirlpatch.png)