libsyntax-highlight-perl-improved-perl (1.01-3) debian-dir only changes

--- libsyntax-highlight-perl-improved-perl-1.01.orig/debian/control
+++ libsyntax-highlight-perl-improved-perl-1.01/debian/control
@@ -0,0 +1,21 @@
+Source: libsyntax-highlight-perl-improved-perl
+Section: perl
+Priority: optional
+Build-Depends: debhelper (>= 5.0.0), quilt
+Build-Depends-Indep: perl (>= 5.8.8-7)
+Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
+Uploaders: Jaldhar H. Vyas <jaldhar@debian.org>, gregor herrmann <gregor+debian@comodo.priv.at>
+Standards-Version: 3.7.3
+Homepage: http://search.cpan.org/dist/Syntax-Highlight-Perl-Improved/
+Vcs-Svn: svn://svn.debian.org/pkg-perl/trunk/libsyntax-highlight-perl-improved-perl/
+Vcs-Browser: http://svn.debian.org/wsvn/pkg-perl/trunk/libsyntax-highlight-perl-improved-perl/
+
+Package: libsyntax-highlight-perl-improved-perl
+Architecture: all
+Depends: ${perl:Depends}, ${misc:Depends},
+Description: Highlighting of Perl Syntactical Structures
+ This module provides syntax highlighting for Perl code. The design bias is
+ roughly line-oriented and streamed (ie, processing a file line-by-line in a
+ single pass). Provisions may be made in the future for tasks related to
+ "back-tracking" (ie, re-doing a single line in the middle of a stream) such
+ as speeding up state copying.
--- libsyntax-highlight-perl-improved-perl-1.01.orig/debian/patches/series
+++ libsyntax-highlight-perl-improved-perl-1.01/debian/patches/series
@@ -0,0 +1 @@
+viewperl.patch
--- libsyntax-highlight-perl-improved-perl-1.01.orig/debian/patches/viewperl.patch
+++ libsyntax-highlight-perl-improved-perl-1.01/debian/patches/viewperl.patch
@@ -0,0 +1,31 @@
+Index: libsyntax-highlight-perl-improved-perl/viewperl
+===================================================================
+--- libsyntax-highlight-perl-improved-perl.orig/viewperl	2007-08-26 22:54:32.000000000 +0200
++++ libsyntax-highlight-perl-improved-perl/viewperl	2007-08-26 22:54:46.000000000 +0200
+@@ -16,7 +16,7 @@
+ 
+ use FileHandle;
+ use Getopt::Long;
+-use Syntax::Highlight::Perl 1.0;
++use Syntax::Highlight::Perl::Improved 1.0;
+ 
+ 
+ #=====================================================================
+@@ -69,7 +69,7 @@
+     bgwhite   => "\e[47m",
+ );
+ 
+-$formatter = new Syntax::Highlight::Perl;
++$formatter = new Syntax::Highlight::Perl::Improved;
+ 
+ #
+ # Set up formatter to do ANSI colors.
+@@ -283,7 +283,7 @@
+ 
+ 
+ #
+-# Convert module names (eg, Syntax::Highlight::Perl) to
++# Convert module names (eg, Syntax::Highlight::Perl::Improved) to
+ # fully qualified file names using current state of @INC.
+ #
+ # Returns undef on error (file-not-found).
--- libsyntax-highlight-perl-improved-perl-1.01.orig/debian/rules
+++ libsyntax-highlight-perl-improved-perl-1.01/debian/rules
@@ -0,0 +1,75 @@
+#!/usr/bin/make -f
+# This debian/rules file is provided as a template for normal perl
+# packages. It was created by Marc Brockschmidt <marc@dch-faq.de> for
+# the Debian Perl Group (http://pkg-perl.alioth.debian.org/) but may
+# be used freely wherever it is useful.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+include /usr/share/quilt/quilt.make
+
+# If set to a true value then MakeMaker's prompt function will
+# always return the default without waiting for user input.
+export PERL_MM_USE_DEFAULT=1
+
+PACKAGE=$(shell dh_listpackages)
+
+ifndef PERL
+PERL = /usr/bin/perl
+endif
+
+TMP     =$(CURDIR)/debian/$(PACKAGE)
+
+build: build-stamp
+build-stamp: $(QUILT_STAMPFN)
+	dh_testdir
+
+	$(PERL) Makefile.PL INSTALLDIRS=vendor
+	$(MAKE)
+
+	touch $@
+
+clean: unpatch
+	dh_testdir
+	dh_testroot
+
+	dh_clean build-stamp install-stamp
+	[ ! -f Makefile ] || $(MAKE) realclean
+
+install: install-stamp
+install-stamp: build-stamp
+	dh_testdir
+	dh_testroot
+	dh_clean -k
+
+	$(MAKE) install DESTDIR=$(TMP) PREFIX=/usr
+	dh_installdirs usr/bin
+	dh_install viewperl usr/bin
+
+	[ ! -d $(TMP)/usr/lib/perl5 ] || rmdir --ignore-fail-on-non-empty --parents --verbose $(TMP)/usr/lib/perl5
+
+	touch $@
+
+binary-arch:
+# We have nothing to do here for an architecture-independent package
+
+binary-indep: build install
+	dh_testdir
+	dh_testroot
+	dh_installdocs README
+	dh_installchangelogs ChangeLog
+	dh_installman debian/viewperl.1
+	dh_perl
+	dh_compress
+	dh_fixperms
+	dh_installdeb
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb
+
+source diff:
+	@echo >&2 'source and diff are obsolete - use dpkg-source -b'; false
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install
--- libsyntax-highlight-perl-improved-perl-1.01.orig/debian/watch
+++ libsyntax-highlight-perl-improved-perl-1.01/debian/watch
@@ -0,0 +1,2 @@
+version=3
+http://search.cpan.org/dist/Syntax-Highlight-Perl-Improved/   .*/Syntax-Highlight-Perl-Improved-v?(\d[\d_.]+)\.(?:tar(?:\.gz|\.bz2)?|tgz|zip)
--- libsyntax-highlight-perl-improved-perl-1.01.orig/debian/copyright
+++ libsyntax-highlight-perl-improved-perl-1.01/debian/copyright
@@ -0,0 +1,23 @@
+This is the debian package for the Syntax::Highlight::Perl::Improved module.
+It was created by Jaldhar H. Vyas <jaldhar@debian.org> using dh-make-perl
+from the original package found at CPAN
+
+The original package can be downloaded from:
+    http://search.cpan.org/dist/Syntax-Highlight-Perl-Improved/
+    
+The upstream author is: 
+
+David C.Y. Liu b<davidcyl@cpan.org>
+
+based on code by
+Cory Johns darkness@yossman.net
+
+Copyright (c) 2004 David C.Y. Liu.  This library is free software; you can
+redistribute and/or modify it under the same conditions as Perl itself..
+
+The Artistic and GPL licences under which Perl is distributed can be found
+in /usr/share/common-licenses/ . See /usr/share/doc/perl/copyright for
+the license of Perl itself.
+
+The Debian packaging is (C) 2007, Jaldhar H. Vyas <jaldhar@debian.org> and
+is licensed under the same terms as the software itself (see above).
--- libsyntax-highlight-perl-improved-perl-1.01.orig/debian/compat
+++ libsyntax-highlight-perl-improved-perl-1.01/debian/compat
@@ -0,0 +1 @@
+5
--- libsyntax-highlight-perl-improved-perl-1.01.orig/debian/changelog
+++ libsyntax-highlight-perl-improved-perl-1.01/debian/changelog
@@ -0,0 +1,31 @@
+libsyntax-highlight-perl-improved-perl (1.01-3) unstable; urgency=low
+
+  * debian/control: Added: Vcs-Svn field (source stanza); Vcs-Browser
+    field (source stanza); Homepage field (source stanza). Removed: XS-
+    Vcs-Svn fields.
+  * debian/rules:
+    - delete /usr/lib/perl5 only if it exists (closes: #468018)
+    - update based on dh-make-perl's templates
+  * debian/watch: use dist-based URL.
+  * Set Standards-Version to 3.7.3 (no changes).
+  * debian/copyright: use generic download URL.
+
+ -- gregor herrmann <gregor+debian@comodo.priv.at>  Wed, 12 Mar 2008 20:35:38 +0100
+
+libsyntax-highlight-perl-improved-perl (1.01-2) unstable; urgency=low
+
+  [ gregor herrmann ]
+  * Add watch file.
+  * Patch viewperl to make it use the actual library we're installing.
+  * Add manpage for viewperl.
+
+  [ Jaldhar H. Vyas ]
+  * Added location of upstream tarball to debian/copyright.
+
+ -- Jaldhar H. Vyas <jaldhar@debian.org>  Mon, 27 Aug 2007 02:12:33 -0400
+
+libsyntax-highlight-perl-improved-perl (1.01-1) unstable; urgency=low
+
+  * Initial Release.
+
+ -- Jaldhar H. Vyas <jaldhar@debian.org>  Wed, 22 Aug 2007 14:36:43 -0400
--- libsyntax-highlight-perl-improved-perl-1.01.orig/debian/viewperl.1
+++ libsyntax-highlight-perl-improved-perl-1.01/debian/viewperl.1
@@ -0,0 +1,107 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
+.TH VIEWPERL "1" "August 2007" "viewperl" "User Commands"
+.SH NAME
+viewperl - quickly view syntax highlighted Perl code
+.SH SYNOPSIS
+.B viewperl
+[\fIOPTION\fR]... \fIFILE\fR...
+.SH DESCRIPTION
+View a Perl source code file, syntax highlighted.
+.TP
+\fB\-c\fR, \fB\-\-code\fR=\fICODE\fR
+view CODE, syntax highlighted
+.TP
+\fB\-l\fR, \fB\-\-lines\fR
+display line numbers
+.TP
+\fB\-L\fR, \fB\-\-no\-lines\fR
+supress display of line numbers (default)
+.TP
+\fB\-m\fR, \fB\-\-module\fR=\fIFILE\fR
+consider FILE the name of a module, not a file name
+.TP
+\fB\-n\fR, \fB\-\-name\fR
+display the name of each file (default)
+.TP
+\fB\-N\fR, \fB\-\-no\-name\fR
+supress display of file names (implied by \fB\-\-no\-reset\fR)
+.TP
+\fB\-p\fR, \fB\-\-pod\fR
+display inline POD documentation (default)
+.TP
+\fB\-P\fR, \fB\-\-no\-pod\fR
+hide POD documentation (line numbers still increment)
+.TP
+\fB\-r\fR, \fB\-\-reset\fR
+reset formatting and line numbers each file (default)
+.TP
+\fB\-R\fR, \fB\-\-no\-reset\fR
+supress resetting of formatting and line numbers
+.TP
+\fB\-s\fR, \fB\-\-shift\fR=\fIWIDTH\fR
+set tab width (default is 4)
+.TP
+\fB\-t\fR, \fB\-\-tabs\fR
+translate tabs into spaces (default)
+.TP
+\fB\-T\fR, \fB\-\-no\-tabs\fR
+supress translating of tabs into spaces
+.TP
+\fB\-\-help\fR
+display this help and exit
+.PP
+Note that module names should be given as they would appear after a Perl `use' or
+`require' statement.  `Getopt::Long', for example.
+.PP
+Each string given using \fB\-c\fR is considered a different file, so line number and
+formatting resets will apply.
+.PP
+View a Perl source code file, syntax highlighted.
+.TP
+\fB\-c\fR, \fB\-\-code\fR=\fICODE\fR
+view CODE, syntax highlighted
+.TP
+\fB\-l\fR, \fB\-\-lines\fR
+display line numbers
+.TP
+\fB\-L\fR, \fB\-\-no\-lines\fR
+supress display of line numbers (default)
+.TP
+\fB\-m\fR, \fB\-\-module\fR=\fIFILE\fR
+consider FILE the name of a module, not a file name
+.TP
+\fB\-n\fR, \fB\-\-name\fR
+display the name of each file (default)
+.TP
+\fB\-N\fR, \fB\-\-no\-name\fR
+supress display of file names (implied by \fB\-\-no\-reset\fR)
+.TP
+\fB\-p\fR, \fB\-\-pod\fR
+display inline POD documentation (default)
+.TP
+\fB\-P\fR, \fB\-\-no\-pod\fR
+hide POD documentation (line numbers still increment)
+.TP
+\fB\-r\fR, \fB\-\-reset\fR
+reset formatting and line numbers each file (default)
+.TP
+\fB\-R\fR, \fB\-\-no\-reset\fR
+supress resetting of formatting and line numbers
+.TP
+\fB\-s\fR, \fB\-\-shift\fR=\fIWIDTH\fR
+set tab width (default is 4)
+.TP
+\fB\-t\fR, \fB\-\-tabs\fR
+translate tabs into spaces (default)
+.TP
+\fB\-T\fR, \fB\-\-no\-tabs\fR
+supress translating of tabs into spaces
+.TP
+\fB\-\-help\fR
+display this help and exit
+.PP
+Note that module names should be given as they would appear after a Perl `use' or
+`require' statement.  `Getopt::Long', for example.
+.PP
+Each string given using \fB\-c\fR is considered a different file, so line number and
+formatting resets will apply.