--- libxau-1.0.6.orig/debian/rules
+++ libxau-1.0.6/debian/rules
@@ -0,0 +1,104 @@
+#!/usr/bin/make -f
+# debian/rules for the Debian libxau package.
+# Copyright © 2004 Scott James Remnant <scott@netsplit.com>
+# Copyright © 2005 Daniel Stone <daniel@fooishbar.org>
+# Copyright © 2005 David Nusinow <dnusinow@debian.org>
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+# set this to the name of the main shlib's binary package
+PACKAGE = libxau6
+
+include debian/xsfbs/xsfbs.mk
+
+CFLAGS = -Wall -g
+ifneq (,$(filter noopt,$(DEB_BUILD_OPTIONS)))
+ CFLAGS += -O0
+else
+ CFLAGS += -O2
+endif
+ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+ NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+ MAKEFLAGS += -j$(NUMJOBS)
+endif
+
+DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH)
+DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE))
+ confflags += --build=$(DEB_HOST_GNU_TYPE)
+else
+ confflags += --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE)
+endif
+
+configure: $(STAMP_DIR)/patch
+ autoreconf -vfi
+
+build/config.status: configure
+ mkdir -p build
+ cd build && \
+ ../configure \
+ --prefix=/usr \
+ --mandir=\$${prefix}/share/man \
+ --infodir=\$${prefix}/share/info \
+ $(confflags) \
+ CFLAGS="$(CFLAGS)"
+
+build: build-stamp
+build-stamp: build/config.status
+ dh_testdir
+
+ cd build && $(MAKE)
+
+ touch build-stamp
+
+clean: xsfclean
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp
+
+ rm -f config.cache config.log config.status
+ rm -f */config.cache */config.log */config.status
+ rm -f conftest* */conftest*
+ rm -rf autom4te.cache */autom4te.cache
+ rm -rf build
+ rm -f $$(find -name Makefile.in)
+ rm -f compile config.guess config.sub configure depcomp install-sh
+ rm -f ltmain.sh missing INSTALL aclocal.m4 mkinstalldirs config.h.in
+
+ dh_clean
+
+install: build
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs
+
+ cd build && $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install
+
+# Build architecture-dependent files here.
+binary-arch: build install
+ dh_testdir
+ dh_testroot
+
+ dh_installdocs
+ dh_install --sourcedir=debian/tmp --list-missing
+ dh_installchangelogs ChangeLog
+ dh_link
+ dh_strip --dbg-package=$(PACKAGE)-dbg
+ dh_compress
+ dh_fixperms
+ dh_makeshlibs --add-udeb=$(PACKAGE)-udeb
+ dh_shlibdeps
+ dh_installdeb
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+
+# Build architecture-independent files here.
+binary-indep: build install
+# Nothing to do
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install
--- libxau-1.0.6.orig/debian/control
+++ libxau-1.0.6/debian/control
@@ -0,0 +1,87 @@
+Source: libxau
+Section: x11
+Priority: optional
+Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
+Uploaders: David Nusinow <dnusinow@debian.org>, Cyril Brulebois <kibi@debian.org>
+Build-Depends:
+ debhelper (>= 5.0.0),
+ pkg-config,
+ x11proto-core-dev,
+ quilt,
+ autoconf,
+ automake,
+ libtool,
+ xutils-dev (>= 1:7.5+1),
+Standards-Version: 3.9.0
+Vcs-Git: git://git.debian.org/git/pkg-xorg/lib/libxau
+Vcs-Browser: http://git.debian.org/?p=pkg-xorg/lib/libxau.git
+
+Package: libxau6
+Section: libs
+Architecture: any
+Depends:
+ ${shlibs:Depends},
+ ${misc:Depends},
+Description: X11 authorisation library
+ This package provides the main interface to the X11 authorisation handling,
+ which controls authorisation for X connections, both client-side and
+ server-side.
+ .
+ More information about X.Org can be found at:
+ <URL:http://www.X.org>
+ .
+ This module can be found at
+ git://anongit.freedesktop.org/git/xorg/lib/libXau
+
+Package: libxau6-udeb
+XC-Package-Type: udeb
+Section: debian-installer
+Architecture: any
+Depends:
+ ${shlibs:Depends},
+Description: X11 authorisation library
+ This is a udeb, or a microdeb, for the debian-installer.
+
+Package: libxau6-dbg
+Section: debug
+Architecture: any
+Priority: extra
+Depends:
+ ${shlibs:Depends},
+ ${misc:Depends},
+ libxau6 (= ${binary:Version}),
+Description: X11 authorisation library (debug package)
+ This package provides the main interface to the X11 authorisation handling,
+ which controls authorisation for X connections, both client-side and
+ server-side.
+ .
+ This package contains the debug versions of the library found in libxau6.
+ Non-developers likely have little use for this package.
+ .
+ More information about X.Org can be found at:
+ <URL:http://www.X.org>
+ .
+ This module can be found at
+ git://anongit.freedesktop.org/git/xorg/lib/libXau
+
+Package: libxau-dev
+Section: libdevel
+Architecture: any
+Depends:
+ ${shlibs:Depends},
+ ${misc:Depends},
+ libxau6 (= ${binary:Version}),
+ x11proto-core-dev,
+Description: X11 authorisation library (development headers)
+ This package provides the main interface to the X11 authorisation handling,
+ which controls authorisation for X connections, both client-side and
+ server-side.
+ .
+ This package contains the development headers for the library found in libxau6.
+ Non-developers likely have little use for this package.
+ .
+ More information about X.Org can be found at:
+ <URL:http://www.X.org>
+ .
+ This module can be found at
+ git://anongit.freedesktop.org/git/xorg/lib/libXau
--- libxau-1.0.6.orig/debian/watch
+++ libxau-1.0.6/debian/watch
@@ -0,0 +1,2 @@
+version=3
+http://xorg.freedesktop.org/releases/individual/lib/ libXau-(.*)\.tar\.gz
--- libxau-1.0.6.orig/debian/copyright
+++ libxau-1.0.6/debian/copyright
@@ -0,0 +1,24 @@
+This package was downloaded from
+http://xorg.freedesktop.org/releases/individual/lib/
+
+Copyright 1988, 1998 The Open Group
+
+Permission to use, copy, modify, distribute, and sell this software and its
+documentation for any purpose is hereby granted without fee, provided that
+the above copyright notice appear in all copies and that both that
+copyright notice and this permission notice appear in supporting
+documentation.
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the name of The Open Group shall not be
+used in advertising or otherwise to promote the sale, use or other dealings
+in this Software without prior written authorization from The Open Group.
--- libxau-1.0.6.orig/debian/README.source
+++ libxau-1.0.6/debian/README.source
@@ -0,0 +1,73 @@
+------------------------------------------------------
+Quick Guide To Patching This Package For The Impatient
+------------------------------------------------------
+
+1. Make sure you have quilt installed
+2. Unpack the package as usual with "dpkg-source -x"
+3. Run the "patch" target in debian/rules
+4. Create a new patch with "quilt new" (see quilt(1))
+5. Edit all the files you want to include in the patch with "quilt edit"
+ (see quilt(1)).
+6. Write the patch with "quilt refresh" (see quilt(1))
+7. Run the "clean" target in debian/rules
+
+Alternatively, instead of using quilt directly, you can drop the patch in to
+debian/patches and add the name of the patch to debian/patches/series.
+
+------------------------------------
+Guide To The X Strike Force Packages
+------------------------------------
+
+The X Strike Force team maintains X packages in git repositories on
+git.debian.org in the pkg-xorg subdirectory. Most upstream packages
+are actually maintained in git repositories as well, so they often
+just need to be pulled into git.debian.org in a "upstream-*" branch.
+Otherwise, the upstream sources are manually installed in the Debian
+git repository.
+
+The .orig.tar.gz upstream source file could be generated this
+"upstream-*" branch in the Debian git repository but it is actually
+copied from upstream tarballs directly.
+
+Due to X.org being highly modular, packaging all X.org applications
+as their own independent packages would have created too many Debian
+packages. For this reason, some X.org applications have been grouped
+into larger packages: xutils, xutils-dev, x11-apps, x11-session-utils,
+x11-utils, x11-xfs-utils, x11-xkb-utils, x11-xserver-utils.
+Most packages, including the X.org server itself and all libraries
+and drivers are, however maintained independently.
+
+The Debian packaging is added by creating the "debian-*" git branch
+which contains the aforementioned "upstream-*" branch plus the debian/
+repository files.
+When a patch has to be applied to the Debian package, two solutions
+are involved:
+* If the patch is available in one of the upstream branches, it
+ may be git'cherry-picked into the Debian repository. In this
+ case, it appears directly in the .diff.gz.
+* Otherwise, the patch is added to debian/patches/ which is managed
+ with quilt as documented in /usr/share/doc/quilt/README.source.
+
+quilt is actually invoked by the Debian X packaging through a larger
+set of scripts called XSFBS. XSFBS brings some other X specific
+features such as managing dependencies and conflicts due to the video
+and input driver ABIs.
+XSFBS itself is maintained in a separate repository at
+ git://git.debian.org/pkg-xorg/xsfbs.git
+and it is pulled inside the other Debian X repositories when needed.
+
+The XSFBS patching system requires a build dependency on quilt. Also
+a dependency on $(STAMP_DIR)/patch has to be added to debian/rules
+so that the XSFBS patching occurs before the actual build. So the
+very first target of the build (likely the one running autoreconf)
+should depend on $(STAMP_DIR)/patch. It should also not depend on
+anything so that parallel builds are correctly supported (nothing
+should probably run while patching is being done). And finally, the
+clean target should depend on the xsfclean target so that patches
+are unapplied on clean.
+
+When the upstream sources contain some DFSG-nonfree files, they are
+listed in text files in debian/prune/ in the "debian-*" branch of
+the Debian repository. XSFBS' scripts then take care of removing
+these listed files during the build so as to generate a modified
+DFSG-free .orig.tar.gz tarball.
--- libxau-1.0.6.orig/debian/libxau6-udeb.install
+++ libxau-1.0.6/debian/libxau6-udeb.install
@@ -0,0 +1 @@
+usr/lib/libXau.so.6*
--- libxau-1.0.6.orig/debian/libxau-dev.install
+++ libxau-1.0.6/debian/libxau-dev.install
@@ -0,0 +1,5 @@
+usr/include/X11/*
+usr/share/man/man3/*
+usr/lib/libXau.a
+usr/lib/libXau.so
+usr/lib/pkgconfig/xau.pc
--- libxau-1.0.6.orig/debian/libxau6.install
+++ libxau-1.0.6/debian/libxau6.install
@@ -0,0 +1 @@
+usr/lib/libXau.so.6*
--- libxau-1.0.6.orig/debian/changelog
+++ libxau-1.0.6/debian/changelog
@@ -0,0 +1,159 @@
+libxau (1:1.0.6-1) unstable; urgency=low
+
+ * New upstream release
+ - manpage fixes (closes: #583599). Thanks, Tom Fogal!
+ * Drop Pre-Depends on x11-common, only necessary for upgrades from sarge.
+ * Bump build-dependency on xutils-dev for util-macros 1.4.
+ * Bump Standards-Version to 3.9.0.
+
+ -- Julien Cristau <jcristau@debian.org> Sat, 24 Jul 2010 11:43:07 +0200
+
+libxau (1:1.0.5-2) unstable; urgency=low
+
+ [ Julien Cristau ]
+ * Rename the build directory to not include DEB_BUILD_GNU_TYPE for no
+ good reason. Thanks, Colin Watson!
+ * Remove myself from Uploaders
+
+ [ Cyril Brulebois ]
+ * Add udeb needed for the graphical installer: libxau6-udeb.
+ * Add myself to Uploaders.
+ * Bump Standards-Version from 3.8.3 to 3.8.4 (no changes needed).
+ * Add ${misc:Depends} to non-udeb binaries, and wrap Depends.
+
+ -- Cyril Brulebois <kibi@debian.org> Tue, 09 Mar 2010 02:21:32 +0100
+
+libxau (1:1.0.5-1) unstable; urgency=low
+
+ * New upstream release
+ * Update xsfbs to 5693792171d885769e58dcccc053c08b11acd12a
+ + README.source lets us bump standards version to 3.8.3.0
+ * Change -dbg package to "debug" section
+ * Delete autogen.sh, which gets installed at build time
+
+ -- David Nusinow <dnusinow@debian.org> Mon, 14 Sep 2009 21:37:57 -0400
+
+libxau (1:1.0.4-2) unstable; urgency=low
+
+ * Upload to unstable.
+
+ -- Julien Cristau <jcristau@debian.org> Mon, 16 Feb 2009 19:02:29 +0100
+
+libxau (1:1.0.4-1) experimental; urgency=low
+
+ [ Brice Goglin ]
+ * Add upstream URL to debian/copyright.
+ * Add a link to www.X.org and a reference to the upstream module
+ in the long description.
+
+ [ Timo Aaltonen ]
+ * New upstream release.
+
+ [ Julien Cristau ]
+ * Run autoreconf on build, add build-deps on automake, autoconf, libtool and
+ xutils-dev.
+ * Handle parallel builds.
+
+ -- Julien Cristau <jcristau@debian.org> Fri, 19 Dec 2008 13:11:10 +0100
+
+libxau (1:1.0.3-3) unstable; urgency=low
+
+ * Remove Branden from Uploaders with his permission.
+ * Add myself to Uploaders.
+ * Bump Standards-Version to 3.7.3.
+ * Drop the XS- prefix from Vcs-* control fields.
+ * libxau6{,-dbg} don't need to depend on x11-common.
+ * Use ${binary:Version} instead of the deprecated ${Source-Version}.
+
+ -- Julien Cristau <jcristau@debian.org> Fri, 16 May 2008 15:15:13 +0200
+
+libxau (1:1.0.3-2) unstable; urgency=low
+
+ * Remove Fabio from Uploaders, with his permission.
+ * Add XS-Vcs-Browser.
+ * Put binary packages in the correct sections.
+ * Upload to unstable.
+
+ -- Julien Cristau <jcristau@debian.org> Wed, 11 Apr 2007 17:31:27 +0200
+
+libxau (1:1.0.3-1) experimental; urgency=low
+
+ [ Julien Cristau ]
+ * New upstream release.
+ * Drop outdated CVS info from the descriptions and add XS-Vcs-Git.
+ * Install the upstream changelog.
+
+ -- David Nusinow <dnusinow@debian.org> Thu, 8 Feb 2007 21:21:05 -0500
+
+libxau (1:1.0.1-2) unstable; urgency=low
+
+ [ David Nusinow ]
+ * Run dh_install with --list-missing
+
+ [ Andres Salomon ]
+ * Test for obj-$(DEB_BUILD_GNU_TYPE) before creating it during build;
+ idempotency fix.
+
+ [ Drew Parsons ]
+ * dbg package has priority extra.
+
+ -- David Nusinow <dnusinow@debian.org> Tue, 29 Aug 2006 19:52:49 +0000
+
+libxau (1:1.0.1-1) experimental; urgency=low
+
+ * New upstream version
+ * Set up package to be able to use patches even if we're not currently
+ shipping any. Add quilt to build-dep to deal.
+ * Autoreconf to fix manpage sections (closes: #376026, #356545)
+ * Remove duplicate x11-common depends from libxau-dev
+ * Version x11-common pre-dep in libxau-dev to 1:7.0.0 to match the rest of
+ Debian and shut lintian up
+ * Bump standards version to 3.7.2.0
+ * Bump debhelper compat to 5
+
+ -- David Nusinow <dnusinow@debian.org> Sun, 2 Jul 2006 21:23:08 -0400
+
+libxau (1:1.0.0-4) unstable; urgency=low
+
+ * Build with LIB_MAN_SUFFIX=3 so that manual pages have a .3 extension
+ insteod of .3x. Closes: #356545, #368165
+ * Bump Standards-Version: 3.7.2, no changes needed.
+ * Clean out Depends fields in debian/control, drop all ${misc:Depends}
+ substitutions, and libxau-dev does not need ${shlibs:Depends} and
+ x11-common (the latter because it Pre-Depends on it).
+ * Lintian wants libxau-dev Pre-Depends: x11-common (>= 1:7.0.0)
+ so bump x11-common version to this value.
+
+ -- Denis Barbier <barbier@debian.org> Mon, 14 Aug 2006 20:10:31 +0200
+
+libxau (1:1.0.0-3) unstable; urgency=low
+
+ * Reorder makeshlib command in rules file so that ldconfig is run
+ properly. Thanks Drew Parsons and Steve Langasek.
+
+ -- David Nusinow <dnusinow@debian.org> Tue, 18 Apr 2006 21:49:56 -0400
+
+libxau (1:1.0.0-2) unstable; urgency=low
+
+ * Upload to unstable
+
+ -- David Nusinow <dnusinow@debian.org> Thu, 23 Mar 2006 22:44:28 -0500
+
+libxau (1:1.0.0-1) experimental; urgency=low
+
+ * First upload to Debian
+
+ -- David Nusinow <dnusinow@debian.org> Thu, 29 Dec 2005 20:51:23 -0500
+
+libxau (1:0.1.2-2) breezy; urgency=low
+
+ * Add build dependencies: pkg-config, x11proto-core-dev
+ * Change Build-Depends-Indep to Build-Depends.
+
+ -- Matthias Klose <doko@ubuntu.com> Mon, 23 May 2005 20:17:11 +0000
+
+libxau (1:0.1.2-1) breezy; urgency=low
+
+ * First libxau release.
+
+ -- Daniel Stone <daniel.stone@ubuntu.com> Mon, 16 May 2005 22:10:17 +1000
--- libxau-1.0.6.orig/debian/compat
+++ libxau-1.0.6/debian/compat
@@ -0,0 +1 @@
+5
--- libxau-1.0.6.orig/debian/xsfbs/repack.sh
+++ libxau-1.0.6/debian/xsfbs/repack.sh
@@ -0,0 +1,32 @@
+#!/bin/sh
+
+set -e
+
+if ! [ -d debian/prune ]; then
+ exit 0
+fi
+
+if [ "x$1" != x--upstream-version ]; then
+ exit 1
+fi
+
+version="$2"
+filename="$3"
+
+if [ -z "$version" ] || ! [ -f "$filename" ]; then
+ exit 1
+fi
+
+dir="$(pwd)"
+tempdir="$(mktemp -d)"
+
+cd "$tempdir"
+tar xf "$dir/$filename"
+cat "$dir"/debian/prune/* | while read file; do rm -f */$file; done
+
+tar czf "$dir/$filename" *
+cd "$dir"
+rm -rf "$tempdir"
+echo "Done pruning upstream tarball"
+
+exit 0
--- libxau-1.0.6.orig/debian/xsfbs/xsfbs.mk
+++ libxau-1.0.6/debian/xsfbs/xsfbs.mk
@@ -0,0 +1,289 @@
+#!/usr/bin/make -f
+
+# Debian X Strike Force Build System (XSFBS): Make portion
+
+# Copyright 1996 Stephen Early
+# Copyright 1997 Mark Eichin
+# Copyright 1998-2005, 2007 Branden Robinson
+# Copyright 2005 David Nusinow
+#
+# Licensed under the GNU General Public License, version 2. See the file
+# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
+
+# Originally by Stephen Early <sde1000@debian.org>
+# Modified by Mark W. Eichin <eichin@kitten.gen.ma.us>
+# Modified by Adam Heath <doogie@debian.org>
+# Modified by Branden Robinson <branden@debian.org>
+# Modified by Fabio Massimo Di Nitto <fabbione@fabbione.net>
+# Modified by David Nusinow <dnusinow@debian.org>
+# Acknowledgements to Manoj Srivastava.
+
+# Pass $(DH_OPTIONS) into the environment for debhelper's benefit.
+export DH_OPTIONS
+
+# force quilt to not use ~/.quiltrc and to use debian/patches
+QUILT = QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null
+
+# Set up parameters for the upstream build environment.
+
+# Determine (source) package name from Debian changelog.
+SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \
+ | grep '^Source:' | awk '{print $$2}')
+
+# Determine package version from Debian changelog.
+SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \
+ | grep '^Version:' | awk '{print $$2}')
+
+# Determine upstream version number.
+UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//')
+
+# Determine the source version without the epoch for make-orig-tar-gz
+NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://')
+
+# Figure out who's building this package.
+BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}})
+
+# Find out if this is an official build; an official build has nothing but
+# digits, dots, and/or the codename of a release in the Debian part of the
+# version number. Anything else indicates an unofficial build.
+OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\|etch\|lenny\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi)
+
+# Set up parameters for the Debian build environment.
+
+# Determine our architecture.
+BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH)
+# Work around some old-time dpkg braindamage.
+BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH))
+# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy.
+ifdef DEB_HOST_ARCH
+ ARCH:=$(DEB_HOST_ARCH)
+else
+ # dpkg-cross sets the ARCH environment variable; if set, use it.
+ ifdef ARCH
+ ARCH:=$(ARCH)
+ else
+ ARCH:=$(BUILD_ARCH)
+ endif
+endif
+
+# $(STAMP_DIR) houses stamp files for complex targets.
+STAMP_DIR:=stampdir
+
+# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place
+# their files.
+DEBTREEDIR:=$(CURDIR)/debian/tmp
+
+# All "important" targets have four lines:
+# 1) A target name that is invoked by a package-building tool or the user.
+# This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart.
+# 2) A line delcaring 1) as a phony target (".PHONY:").
+# 3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may
+# depend on other targets.
+# 4) A line declaring 3) as a member of the $(stampdir_targets) variable; the
+# "$(STAMP_DIR)/" prefix is omitted.
+#
+# This indirection is needed so that the "stamp" files that signify when a rule
+# is done can be located in a separate "stampdir". Recall that make has no way
+# to know when a goal has been met for a phony target (like "build" or
+# "install").
+#
+# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@"
+# so that the target will not be run again. Removing the file will make Make
+# run the target over.
+
+# All phony targets should be declared as dependencies of .PHONY, even if they
+# do not have "($STAMP_DIR)/"-prefixed counterparts.
+
+# Define a harmless default rule to keep things from going nuts by accident.
+.PHONY: default
+default:
+
+# Set up the $(STAMP_DIR) directory.
+.PHONY: stampdir
+stampdir_targets+=stampdir
+stampdir: $(STAMP_DIR)/stampdir
+$(STAMP_DIR)/stampdir:
+ mkdir $(STAMP_DIR)
+ >$@
+
+# Set up the package build directory as quilt expects to find it.
+.PHONY: prepare
+stampdir_targets+=prepare
+prepare: $(STAMP_DIR)/prepare
+$(STAMP_DIR)/prepare: $(STAMP_DIR)/log $(STAMP_DIR)/genscripts
+ >$@
+
+.PHONY: log
+stampdir_targets+=log
+log: $(STAMP_DIR)/log
+$(STAMP_DIR)/log: $(STAMP_DIR)/stampdir
+ mkdir -p $(STAMP_DIR)/log
+
+# Apply all patches to the upstream source.
+.PHONY: patch
+stampdir_targets+=patch
+patch: $(STAMP_DIR)/patch
+$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare
+ if ! [ `which quilt` ]; then \
+ echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \
+ exit 1; \
+ fi; \
+ if $(QUILT) next >/dev/null 2>&1; then \
+ echo -n "Applying patches..."; \
+ if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \
+ cat $(STAMP_DIR)/log/patch; \
+ echo "successful."; \
+ else \
+ cat $(STAMP_DIR)/log/patch; \
+ echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \
+ exit 1; \
+ fi; \
+ else \
+ echo "No patches to apply"; \
+ fi; \
+ >$@
+
+# Revert all patches to the upstream source.
+.PHONY: unpatch
+unpatch: $(STAMP_DIR)/log
+ rm -f $(STAMP_DIR)/patch
+ @echo -n "Unapplying patches..."; \
+ if $(QUILT) applied >/dev/null 2>/dev/null; then \
+ if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \
+ cat $(STAMP_DIR)/log/unpatch; \
+ echo "successful."; \
+ else \
+ cat $(STAMP_DIR)/log/unpatch; \
+ echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \
+ exit 1; \
+ fi; \
+ else \
+ echo "nothing to do."; \
+ fi
+
+# Clean the generated maintainer scripts.
+.PHONY: cleanscripts
+cleanscripts:
+ rm -f $(STAMP_DIR)/genscripts
+ rm -f debian/*.config \
+ debian/*.postinst \
+ debian/*.postrm \
+ debian/*.preinst \
+ debian/*.prerm
+
+# Clean the package build tree.
+.PHONY: xsfclean
+xsfclean: cleanscripts unpatch
+ dh_testdir
+ rm -rf .pc
+ rm -rf $(STAMP_DIR) $(SOURCE_DIR)
+ rm -rf imports
+ dh_clean debian/shlibs.local \
+ debian/po/pothead
+
+# Generate the debconf templates POT file header.
+debian/po/pothead: debian/po/pothead.in
+ sed -e 's/SOURCE_VERSION/$(SOURCE_VERSION)/' \
+ -e 's/DATE/$(shell date "+%F %X%z"/)' <$< >$@
+
+# Update POT and PO files.
+.PHONY: updatepo
+updatepo: debian/po/pothead
+ debian/scripts/debconf-updatepo --pot-header=pothead --verbose
+
+# Remove files from the upstream source tree that we don't need, or which have
+# licensing problems. It must be run before creating the .orig.tar.gz.
+#
+# Note: This rule is for Debian package maintainers' convenience, and is not
+# needed for conventional build scenarios.
+.PHONY: prune-upstream-tree
+prune-upstream-tree:
+ # Ensure we're in the correct directory.
+ dh_testdir
+ grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf
+
+# Verify that there are no offsets or fuzz in the patches we apply.
+#
+# Note: This rule is for Debian package maintainers' convenience, and is not
+# needed for conventional build scenarios.
+.PHONY: patch-audit
+patch-audit: prepare unpatch
+ @echo -n "Auditing patches..."; \
+ >$(STAMP_DIR)/log/patch; \
+ FUZZY=; \
+ while [ -n "$$($(QUILT) next)" ]; do \
+ RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\
+ case "$$RESULT" in \
+ succeeded) \
+ echo "fuzzy patch: $$($(QUILT) top)" \
+ | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \
+ FUZZY=yes; \
+ ;; \
+ FAILED) \
+ echo "broken patch: $$($(QUILT) next)" \
+ | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \
+ exit 1; \
+ ;; \
+ esac; \
+ done; \
+ if [ -n "$$FUZZY" ]; then \
+ echo "there were fuzzy patches; please fix."; \
+ exit 1; \
+ else \
+ echo "done."; \
+ fi
+
+# Generate the maintainer scripts.
+.PHONY: genscripts
+stampdir_targets+=genscripts
+genscripts: $(STAMP_DIR)/genscripts
+$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir
+ for FILE in debian/*.config.in \
+ debian/*.postinst.in \
+ debian/*.postrm.in \
+ debian/*.preinst.in \
+ debian/*.prerm.in; do \
+ if [ -e "$$FILE" ]; then \
+ MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \
+ sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \
+ | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \
+ cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \
+ sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \
+ | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \
+ sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \
+ -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \
+ -e 's/@DEFAULT_DCRESOLUTIONS@/$(DEFAULT_DCRESOLUTIONS)/' \
+ <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \
+ rm $$MAINTSCRIPT.tmp; \
+ fi; \
+ done
+ # Validate syntax of generated shell scripts.
+ #sh debian/scripts/validate-posix-sh debian/*.config \
+ # debian/*.postinst \
+ # debian/*.postrm \
+ # debian/*.preinst \
+ # debian/*.prerm
+ >$@
+
+SERVERMINVERS = $(shell cat /usr/share/xserver-xorg/serverminver 2>/dev/null)
+VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null)
+INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null)
+SERVER_DEPENDS = xserver-xorg-core (>= $(SERVERMINVERS))
+VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI)
+INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI)
+ifeq ($(PACKAGE),)
+PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control)
+endif
+
+.PHONY: serverabi
+serverabi: install
+ifeq ($(SERVERMINVERS),)
+ @echo error: xserver-xorg-dev needs to be installed
+ @exit 1
+else
+ echo "xserver:Depends=$(SERVER_DEPENDS)" >> debian/$(PACKAGE).substvars
+ echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
+ echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
+endif
+
+# vim:set noet ai sts=8 sw=8 tw=0:
--- libxau-1.0.6.orig/debian/xsfbs/xsfbs.sh
+++ libxau-1.0.6/debian/xsfbs/xsfbs.sh
@@ -0,0 +1,624 @@
+# $Id$
+
+# This is the X Strike Force shell library for X Window System package
+# maintainer scripts. It serves to define shell functions commonly used by
+# such packages, and performs some error checking necessary for proper operation
+# of those functions. By itself, it does not "do" much; the maintainer scripts
+# invoke the functions defined here to accomplish package installation and
+# removal tasks.
+
+# If you are reading this within a Debian package maintainer script (e.g.,
+# /var/lib/dpkg)info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can
+# skip past this library by scanning forward in this file to the string
+# "GOBSTOPPER".
+
+SOURCE_VERSION=@SOURCE_VERSION@
+OFFICIAL_BUILD=@OFFICIAL_BUILD@
+
+# Use special abnormal exit codes so that problems with this library are more
+# easily tracked down.
+SHELL_LIB_INTERNAL_ERROR=86
+SHELL_LIB_THROWN_ERROR=74
+SHELL_LIB_USAGE_ERROR=99
+
+# old -> new variable names
+if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then
+ DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE"
+fi
+if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then
+ DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF"
+fi
+
+# initial sanity checks
+if [ -z "$THIS_PACKAGE" ]; then
+ cat >&2 <<EOF
+Error: package maintainer script attempted to use shell library without
+definining \$THIS_PACKAGE shell variable. Please report the package name,
+version, and the text of this error message to the Debian Bug Tracking System.
+Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
+instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
+"doc-debian" package, or install the "reportbug" package and use the command of
+the same name to file a report against version $SOURCE_VERSION of this package.
+EOF
+ exit $SHELL_LIB_USAGE_ERROR
+fi
+
+if [ -z "$THIS_SCRIPT" ]; then
+ cat >&2 <<EOF
+Error: package maintainer script attempted to use shell library without
+definining \$THIS_SCRIPT shell variable. Please report the package name,
+version, and the text of this error message to the Debian Bug Tracking System.
+Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
+instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
+"doc-debian" package, or install the "reportbug" package and use the command of
+the same name to file a report against version $SOURCE_VERSION of the
+"$THIS_PACKAGE" package.
+EOF
+ exit $SHELL_LIB_USAGE_ERROR
+fi
+
+if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then
+ RECONFIGURE="true"
+else
+ RECONFIGURE=
+fi
+
+if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then
+ FIRSTINST="yes"
+fi
+
+if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then
+ UPGRADE="yes"
+fi
+
+trap "message;\
+ message \"Received signal. Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\
+ message;\
+ exit 1" HUP INT QUIT TERM
+
+reject_nondigits () {
+ # syntax: reject_nondigits [ operand ... ]
+ #
+ # scan operands (typically shell variables whose values cannot be trusted) for
+ # characters other than decimal digits and barf if any are found
+ while [ -n "$1" ]; do
+ # does the operand contain anything but digits?
+ if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then
+ # can't use die(), because it wraps message() which wraps this function
+ echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \
+ "possibly malicious garbage \"$1\"" >&2
+ exit $SHELL_LIB_THROWN_ERROR
+ fi
+ shift
+ done
+}
+
+reject_unlikely_path_chars () {
+ # syntax: reject_unlikely_path_chars [ operand ... ]
+ #
+ # scan operands (typically shell variables whose values cannot be trusted) for
+ # characters unlikely to be seen in a path and which the shell might
+ # interpret and barf if any are found
+ while [ -n "$1" ]; do
+ # does the operand contain any funny characters?
+ if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then
+ # can't use die(), because I want to avoid forward references
+ echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \
+ "encountered possibly malicious garbage \"$1\"" >&2
+ exit $SHELL_LIB_THROWN_ERROR
+ fi
+ shift
+ done
+}
+
+# Query the terminal to establish a default number of columns to use for
+# displaying messages to the user. This is used only as a fallback in the
+# event the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while
+# the script is running, and this cannot, only being calculated once.)
+DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true
+if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then
+ DEFCOLUMNS=80
+fi
+
+message () {
+ # pretty-print messages of arbitrary length
+ reject_nondigits "$COLUMNS"
+ echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2
+}
+
+observe () {
+ # syntax: observe message ...
+ #
+ # issue observational message suitable for logging someday when support for
+ # it exists in dpkg
+ if [ -n "$DEBUG_XORG_PACKAGE" ]; then
+ message "$THIS_PACKAGE $THIS_SCRIPT note: $*"
+ fi
+}
+
+warn () {
+ # syntax: warn message ...
+ #
+ # issue warning message suitable for logging someday when support for
+ # it exists in dpkg; also send to standard error
+ message "$THIS_PACKAGE $THIS_SCRIPT warning: $*"
+}
+
+die () {
+ # syntax: die message ...
+ #
+ # exit script with error message
+ message "$THIS_PACKAGE $THIS_SCRIPT error: $*"
+ exit $SHELL_LIB_THROWN_ERROR
+}
+
+internal_error () {
+ # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message
+ message "internal error: $*"
+ if [ -n "$OFFICIAL_BUILD" ]; then
+ message "Please report a bug in the $THIS_SCRIPT script of the" \
+ "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
+ "Tracking System. Include all messages above that mention the" \
+ "$THIS_PACKAGE package. Visit " \
+ "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
+ "instructions, read the file" \
+ "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
+ "package, or install the reportbug package and use the command of" \
+ "the same name to file a report."
+ fi
+ exit $SHELL_LIB_INTERNAL_ERROR
+}
+
+usage_error () {
+ message "usage error: $*"
+ message "Please report a bug in the $THIS_SCRIPT script of the" \
+ "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
+ "Tracking System. Include all messages above that mention the" \
+ "$THIS_PACKAGE package. Visit " \
+ "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
+ "instructions, read the file" \
+ "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
+ "package, or install the reportbug package and use the command of" \
+ "the same name to file a report."
+ exit $SHELL_LIB_USAGE_ERROR
+}
+
+font_update () {
+ # run $UPDATECMDS in $FONTDIRS
+
+ local dir cmd shortcmd x_font_dir_prefix
+
+ x_font_dir_prefix="/usr/share/fonts/X11"
+
+ if [ -z "$UPDATECMDS" ]; then
+ usage_error "font_update() called but \$UPDATECMDS not set"
+ fi
+ if [ -z "$FONTDIRS" ]; then
+ usage_error "font_update() called but \$FONTDIRS not set"
+ fi
+
+ reject_unlikely_path_chars "$UPDATECMDS"
+ reject_unlikely_path_chars "$FONTDIRS"
+
+ for dir in $FONTDIRS; do
+ if [ -d "$x_font_dir_prefix/$dir" ]; then
+ for cmd in $UPDATECMDS; do
+ if which "$cmd" > /dev/null 2>&1; then
+ shortcmd=${cmd##*/}
+ observe "running $shortcmd in $dir font directory"
+ cmd_opts=
+ if [ "$shortcmd" = "update-fonts-alias" ]; then
+ cmd_opts=--x11r7-layout
+ fi
+ if [ "$shortcmd" = "update-fonts-dir" ]; then
+ cmd_opts=--x11r7-layout
+ fi
+ if [ "$shortcmd" = "update-fonts-scale" ]; then
+ cmd_opts=--x11r7-layout
+ fi
+ $cmd $cmd_opts $dir || warn "$cmd $cmd_opts $dir" \
+ "failed; font directory data may not" \
+ "be up to date"
+ else
+ warn "$cmd not found; not updating corresponding $dir font" \
+ "directory data"
+ fi
+ done
+ else
+ warn "$dir is not a directory; not updating font directory data"
+ fi
+ done
+}
+
+remove_conffile_prepare () {
+ # syntax: remove_conffile_prepare filename official_md5sum ...
+ #
+ # Check a conffile "filename" against a list of canonical MD5 checksums.
+ # If the file's current MD5 checksum matches one of the "official_md5sum"
+ # operands provided, then prepare the conffile for removal from the system.
+ # We defer actual deletion until the package is configured so that we can
+ # roll this operation back if package installation fails.
+ #
+ # Call this function from a preinst script in the event $1 is "upgrade" or
+ # "install" and verify $2 to ensure the package is being upgraded from a
+ # version (or installed over a version removed-but-not-purged) prior to the
+ # one in which the conffile was obsoleted.
+
+ local conffile current_checksum
+
+ # validate arguments
+ if [ $# -lt 2 ]; then
+ usage_error "remove_conffile_prepare() called with wrong number of" \
+ "arguments; expected at least 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ conffile="$1"
+ shift
+
+ # does the conffile even exist?
+ if [ -e "$conffile" ]; then
+ # calculate its checksum
+ current_checksum=$(md5sum < "$conffile" | sed 's/[[:space:]].*//')
+ # compare it to each supplied checksum
+ while [ -n "$1" ]; do
+ if [ "$current_checksum" = "$1" ]; then
+ # we found a match; move the confffile and stop looking
+ observe "preparing obsolete conffile $conffile for removal"
+ mv "$conffile" "$conffile.$THIS_PACKAGE-tmp"
+ break
+ fi
+ shift
+ done
+ fi
+}
+
+remove_conffile_lookup () {
+ # syntax: remove_conffile_lookup package filename
+ #
+ # Lookup the md5sum of a conffile in dpkg's database, and prepare for removal
+ # if it matches the actual file's md5sum.
+ #
+ # Call this function when you would call remove_conffile_prepare but only
+ # want to check against dpkg's status database instead of known checksums.
+
+ local package conffile old_md5sum
+
+ # validate arguments
+ if [ $# -ne 2 ]; then
+ usage_error "remove_conffile_lookup() called with wrong number of" \
+ "arguments; expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ package="$1"
+ conffile="$2"
+
+ if ! [ -e "$conffile" ]; then
+ return
+ fi
+ old_md5sum="$(dpkg-query -W -f='${Conffiles}' "$package" | \
+ awk '{ if (match($0, "^ '"$conffile"' ")) print $2}')"
+ if [ -n "$old_md5sum" ]; then
+ remove_conffile_prepare "$conffile" "$old_md5sum"
+ fi
+}
+
+remove_conffile_commit () {
+ # syntax: remove_conffile_commit filename
+ #
+ # Complete the removal of a conffile "filename" that has become obsolete.
+ #
+ # Call this function from a postinst script after having used
+ # remove_conffile_prepare() in the preinst.
+
+ local conffile
+
+ # validate arguments
+ if [ $# -ne 1 ]; then
+ usage_error "remove_conffile_commit() called with wrong number of" \
+ "arguments; expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ conffile="$1"
+
+ # if the temporary file created by remove_conffile_prepare() exists, remove it
+ if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
+ observe "committing removal of obsolete conffile $conffile"
+ rm "$conffile.$THIS_PACKAGE-tmp"
+ fi
+}
+
+remove_conffile_rollback () {
+ # syntax: remove_conffile_rollback filename
+ #
+ # Roll back the removal of a conffile "filename".
+ #
+ # Call this function from a postrm script in the event $1 is "abort-upgrade"
+ # or "abort-install" is after having used remove_conffile_prepare() in the
+ # preinst.
+
+ local conffile
+
+ # validate arguments
+ if [ $# -ne 1 ]; then
+ usage_error "remove_conffile_rollback() called with wrong number of" \
+ "arguments; expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ conffile="$1"
+
+ # if the temporary file created by remove_conffile_prepare() exists, move it
+ # back
+ if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
+ observe "rolling back removal of obsolete conffile $conffile"
+ mv "$conffile.$THIS_PACKAGE-tmp" "$conffile"
+ fi
+}
+
+replace_conffile_with_symlink_prepare () {
+ # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \
+ # official_md5sum ...
+ #
+ # Check a conffile "oldfilename" against a list of canonical MD5 checksums.
+ # If the file's current MD5 checksum matches one of the "official_md5sum"
+ # operands provided, then prepare the conffile for removal from the system.
+ # We defer actual deletion until the package is configured so that we can
+ # roll this operation back if package installation fails. Otherwise copy it
+ # to newfilename and let dpkg handle it through conffiles mechanism.
+ #
+ # Call this function from a preinst script in the event $1 is "upgrade" or
+ # "install" and verify $2 to ensure the package is being upgraded from a
+ # version (or installed over a version removed-but-not-purged) prior to the
+ # one in which the conffile was obsoleted.
+
+ local conffile current_checksum
+
+ # validate arguments
+ if [ $# -lt 3 ]; then
+ usage_error "replace_conffile_with_symlink_prepare() called with wrong" \
+ " number of arguments; expected at least 3, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ oldconffile="$1"
+ shift
+ newconffile="$1"
+ shift
+
+ remove_conffile_prepare "$_oldconffile" "$@"
+ # If $oldconffile still exists, then md5sums didn't match.
+ # Copy it to new one.
+ if [ -f "$oldconffile" ]; then
+ cp "$oldconffile" "$newconffile"
+ fi
+
+}
+
+replace_conffile_with_symlink_commit () {
+ # syntax: replace_conffile_with_symlink_commit oldfilename
+ #
+ # Complete the removal of a conffile "oldfilename" that has been
+ # replaced by a symlink.
+ #
+ # Call this function from a postinst script after having used
+ # replace_conffile_with_symlink_prepare() in the preinst.
+
+ local conffile
+
+ # validate arguments
+ if [ $# -ne 1 ]; then
+ usage_error "replace_conffile_with_symlink_commit() called with wrong" \
+ "number of arguments; expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ conffile="$1"
+
+ remove_conffile_commit "$conffile"
+}
+
+replace_conffile_with_symlink_rollback () {
+ # syntax: replace_conffile_with_symlink_rollback oldfilename newfilename
+ #
+ # Roll back the replacing of a conffile "oldfilename" with symlink to
+ # "newfilename".
+ #
+ # Call this function from a postrm script in the event $1 is "abort-upgrade"
+ # or "abort-install" and verify $2 to ensure the package failed to upgrade
+ # from a version (or install over a version removed-but-not-purged) prior
+ # to the one in which the conffile was obsoleted.
+ # You should have used replace_conffile_with_symlink_prepare() in the
+ # preinst.
+
+ local conffile
+
+ # validate arguments
+ if [ $# -ne 2 ]; then
+ usage_error "replace_conffile_with_symlink_rollback() called with wrong" \
+ "number of arguments; expected 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ oldconffile="$1"
+ newconffile="$2"
+
+ remove_conffile_rollback "$_oldconffile"
+ if [ -f "$newconffile" ]; then
+ rm "$newconffile"
+ fi
+}
+
+run () {
+ # syntax: run command [ argument ... ]
+ #
+ # Run specified command with optional arguments and report its exit status.
+ # Useful for commands whose exit status may be nonzero, but still acceptable,
+ # or commands whose failure is not fatal to us.
+ #
+ # NOTE: Do *not* use this function with db_get or db_metaget commands; in
+ # those cases the return value of the debconf command *must* be checked
+ # before the string returned by debconf is used for anything.
+
+ local retval
+
+ # validate arguments
+ if [ $# -lt 1 ]; then
+ usage_error "run() called with wrong number of arguments; expected at" \
+ "least 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ "$@" || retval=$?
+
+ if [ ${retval:-0} -ne 0 ]; then
+ observe "command \"$*\" exited with status $retval"
+ fi
+}
+
+make_symlink_sane () {
+ # syntax: make_symlink_sane symlink target
+ #
+ # Ensure that the symbolic link symlink exists, and points to target.
+ #
+ # If symlink does not exist, create it and point it at target.
+ #
+ # If symlink exists but is not a symbolic link, back it up.
+ #
+ # If symlink exists, is a symbolic link, but points to the wrong location, fix
+ # it.
+ #
+ # If symlink exists, is a symbolic link, and already points to target, do
+ # nothing.
+ #
+ # This function wouldn't be needed if ln had an -I, --idempotent option.
+
+ # Validate arguments.
+ if [ $# -ne 2 ]; then
+ usage_error "make_symlink_sane() called with wrong number of arguments;" \
+ "expected 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ # We could just use the positional parameters as-is, but that makes things
+ # harder to follow.
+ local symlink target
+
+ symlink="$1"
+ target="$2"
+
+ if [ -L "$symlink" ] && [ "$(readlink "$symlink")" = "$target" ]; then
+ observe "link from $symlink to $target already exists"
+ else
+ observe "creating symbolic link from $symlink to $target"
+ mkdir -p "${target%/*}" "${symlink%/*}"
+ ln -s -b -S ".dpkg-old" "$target" "$symlink"
+ fi
+}
+
+migrate_dir_to_symlink () {
+ # syntax: migrate_dir_to_symlink old_location new_location
+ #
+ # Per Debian Policy section 6.5.4, "A directory will never be replaced by a
+ # symbolic link to a directory or vice versa; instead, the existing state
+ # (symlink or not) will be left alone and dpkg will follow the symlink if
+ # there is one."
+ #
+ # We have to do it ourselves.
+ #
+ # This function moves the contents of old_location, a directory, into
+ # new_location, a directory, then makes old_location a symbolic link to
+ # new_location.
+ #
+ # old_location need not exist, but if it does, it must be a directory (or a
+ # symlink to a directory). If it is not, it is backed up. If new_location
+ # exists already and is not a directory, it is backed up.
+ #
+ # This function should be called from a package's preinst so that other
+ # packages unpacked after this one --- but before this package's postinst runs
+ # --- are unpacked into new_location even if their payloads contain
+ # old_location filespecs.
+
+ # Validate arguments.
+ if [ $# -ne 2 ]; then
+ usage_error "migrate_dir_to_symlink() called with wrong number of"
+ "arguments; expected 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ # We could just use the positional parameters as-is, but that makes things
+ # harder to follow.
+ local new old
+
+ old="$1"
+ new="$2"
+
+ # Is old location a symlink?
+ if [ -L "$old" ]; then
+ # Does it already point to new location?
+ if [ "$(readlink "$old")" = "$new" ]; then
+ # Nothing to do; migration has already been done.
+ observe "migration of $old to $new already done"
+ return 0
+ else
+ # Back it up.
+ warn "backing up symbolic link $old as $old.dpkg-old"
+ mv -b "$old" "$old.dpkg-old"
+ fi
+ fi
+
+ # Does old location exist, but is not a directory?
+ if [ -e "$old" ] && ! [ -d "$old" ]; then
+ # Back it up.
+ warn "backing up non-directory $old as $old.dpkg-old"
+ mv -b "$old" "$old.dpkg-old"
+ fi
+
+ observe "migrating $old to $new"
+
+ # Is new location a symlink?
+ if [ -L "$new" ]; then
+ # Does it point the wrong way, i.e., back to where we're migrating from?
+ if [ "$(readlink "$new")" = "$old" ]; then
+ # Get rid of it.
+ observe "removing symbolic link $new which points to $old"
+ rm "$new"
+ else
+ # Back it up.
+ warn "backing up symbolic link $new as $new.dpkg-old"
+ mv -b "$new" "$new.dpkg-old"
+ fi
+ fi
+
+ # Does new location exist, but is not a directory?
+ if [ -e "$new" ] && ! [ -d "$new" ]; then
+ warn "backing up non-directory $new as $new.dpkg-old"
+ mv -b "$new" "$new.dpkg-old"
+ fi
+
+ # Create new directory if it does not yet exist.
+ if ! [ -e "$new" ]; then
+ observe "creating $new"
+ mkdir -p "$new"
+ fi
+
+ # Copy files in old location to new location. Back up any filenames that
+ # already exist in the new location with the extension ".dpkg-old".
+ observe "copying files from $old to $new"
+ if ! (cd "$old" && cp -a -b -S ".dpkg-old" . "$new"); then
+ die "error(s) encountered while copying files from $old to $new"
+ fi
+
+ # Remove files at old location.
+ observe "removing $old"
+ rm -r "$old"
+
+ # Create symlink from old location to new location.
+ make_symlink_sane "$old" "$new"
+}
+
+# vim:set ai et sw=2 ts=2 tw=80:
+
+# GOBSTOPPER: The X Strike Force shell library ends here.
![[patchlogo]](http://patch-tracker.debian.org/static/img/swirlpatch.png)