libxaw (2:1.0.7-1) debian-dir only changes

Summary

 debian/README.source                      |   73 +++
 debian/changelog                          |  211 ++++++++++
 debian/compat                             |    1 
 debian/control                            |   93 ++++
 debian/copyright                          |  129 ++++++
 debian/libxaw7-dev.install                |    6 
 debian/libxaw7-dev.links                  |    1 
 debian/libxaw7.install                    |    2 
 debian/patches/01_Xaw_StripChart_fix.diff |  102 ++++
 debian/patches/series                     |    1 
 debian/rules                              |  104 +++++
 debian/watch                              |    2 
 debian/xsfbs/repack.sh                    |   32 +
 debian/xsfbs/xsfbs.mk                     |  276 +++++++++++++
 debian/xsfbs/xsfbs.sh                     |  622 ++++++++++++++++++++++++++++++
 15 files changed, 1655 insertions(+)

    
download this patch

Patch contents

--- libxaw-1.0.7.orig/debian/changelog
+++ libxaw-1.0.7/debian/changelog
@@ -0,0 +1,211 @@
+libxaw (2:1.0.7-1) unstable; urgency=low
+
+  [ Julien Cristau ]
+  * Add header to 01_Xaw_StripChart_fix.diff.  This way it's not necessary to
+    go look at the changelog for xfree86 4.2.1-5 to figure out what this is
+    about.
+  * Build the Xaw spec and install it in libxaw7-dev.
+  * README.Debian pointed at this doc in xspecs, it's now unnecessary.
+
+  [ Timo Aaltonen ]
+  * New upstream release.
+  * Bump the build-dep on xutils-dev (>= 1:7.5~1).
+  * Bump Standards-Version to 3.8.3.
+
+ -- Julien Cristau <jcristau@debian.org>  Wed, 25 Nov 2009 13:47:36 +0100
+
+libxaw (2:1.0.6-1) unstable; urgency=low
+
+  * Add README.source, bump Standards-Version to 3.8.2.
+  * New upstream release.
+  * Move -dbg package to section debug.
+
+ -- Brice Goglin <bgoglin@debian.org>  Mon, 27 Jul 2009 17:37:25 +0200
+
+libxaw (2:1.0.5-2) unstable; urgency=low
+
+  * Upload to unstable.
+
+ -- Julien Cristau <jcristau@debian.org>  Mon, 16 Feb 2009 19:11:19 +0100
+
+libxaw (2:1.0.5-1) experimental; urgency=low
+
+  [ Brice Goglin ]
+  * Add a link to www.X.org and a reference to the upstream module
+    in the long description.
+
+  [ Timo Aaltonen ]
+  * New upstream release.
+
+  [ Julien Cristau ]
+  * Run autoreconf on build.  Add build-deps on autoconf, automake, libtool
+    and xutils-dev.
+  * Handle parallel builds.
+
+ -- Julien Cristau <jcristau@debian.org>  Fri, 19 Dec 2008 14:11:04 +0100
+
+libxaw (2:1.0.4-2) unstable; urgency=low
+
+  [ Drew Parsons ]
+  * Add a README.Debian to libxaw7-dev, pointing to further
+    documentation in the xspecs package. Closes: #260659.
+
+  [ Julien Cristau ]
+  * Stop building Xaw6.  Remove the libxaw6, libxaw6-dbg, libxaw6-dev and
+    libxaw-headers packages, moving the contents of -headers to libxaw7-dev
+    (closes: #172890).
+  * Use ${binary:Version} instead of ${Source-Version}.
+  * Bump Standards-Version to 3.7.3.
+  * Add Vcs-Browser, and remove the XS- prefix from Vcs-Git.
+  * Drop the -1 debian revisions from build-dependencies.
+  * libxaw7{,-dbg} don't need to depend on x11-common.
+  * libxaw7-dev now Pre-Depends: x11-common (>= 1:7.0.0) because it contains
+    the Xaw headers in /usr/include/X11.
+  * Add myself to Uploaders.
+
+ -- Julien Cristau <jcristau@debian.org>  Fri, 16 May 2008 16:02:12 +0200
+
+libxaw (2:1.0.4-1) unstable; urgency=low
+
+  [ Julien Cristau ]
+  * Move binary packages to the proper sections.
+
+  [ Timo Aaltonen ]
+  * Bump the epoch so that this can be synced to Ubuntu in the future.
+
+  [ Brice Goglin ]
+  * New upstream release.
+  * Add the upstream URL to debian/copyright.
+  * Add myself to Uploaders, and remove Fabio and Branden with their
+    permission.
+
+ -- Brice Goglin <bgoglin@debian.org>  Wed, 22 Aug 2007 09:22:34 +0200
+
+libxaw (1:1.0.3-3) unstable; urgency=low
+
+  * Upload to unstable.
+
+ -- Julien Cristau <jcristau@debian.org>  Wed, 11 Apr 2007 11:09:19 +0200
+
+libxaw (1:1.0.3-2) experimental; urgency=low
+
+  * Ship the Xaw(3) manpage in libxaw-headers instead of libxaw7-dev.  Bump
+    Replaces to libxaw7-dev (<< 1:1.0.3-2).
+
+ -- Julien Cristau <jcristau@debian.org>  Fri, 16 Feb 2007 17:43:38 +0100
+
+libxaw (1:1.0.3-1) experimental; urgency=low
+
+  * New upstream release.
+  * Drop obsolete CVS info from the descriptions, and add XS-Vcs-Git.
+  * Install the upstream ChangeLog.
+  * Make libxaw binNMUable: build-dep on dpkg-dev >= 1.13.19, and change
+    dependency of libxaw?-dev to libxaw-headers (= ${source:Version}).
+
+ -- Julien Cristau <jcristau@debian.org>  Fri,  9 Feb 2007 18:08:12 +0100
+
+libxaw (1:1.0.2-4) unstable; urgency=low
+
+  * Make libxaw7-dev conflict and replace libxaw6-dev and libxaw8-dev. Also
+    make libxaw6-dev do the same for libxaw7-dev and libxaw8-dev. These were
+    lost in the move to modular.
+  * Handle libXaw.so in *.links files so we can allow both libxaw6-dev and
+    libxaw7-dev to ship an appropriate libXaw.so symlink to libXaw[67].so
+  * Explicitly pass --disable-xaw8 to configure so that we don't try and build
+    it if the xprint .pc file is on the system. The configure script will try
+    and guess whether or not to build xaw8 if it doesn't get an explicit yes
+    or no. This way, we make sure the libXaw.so symlink doesn't get linked to
+    a non-existent libXaw8.so. Thanks Rene Engelhard, Steve Langasek, and
+    Michael Banck.
+
+ -- David Nusinow <dnusinow@debian.org>  Sun, 27 Aug 2006 19:17:18 +0000
+
+libxaw (1:1.0.2-3) unstable; urgency=low
+
+  * Bring X11R7.1 into unstable.
+  * dbg package has priority extra.
+
+ -- Drew Parsons <dparsons@debian.org>  Sat, 26 Aug 2006 00:22:33 +1000
+
+libxaw (1:1.0.2-2) experimental; urgency=low
+
+  * Need to add libxaw7-dev.manpages for man pages to get installed!
+
+ -- Drew Parsons <dparsons@debian.org>  Thu, 10 Aug 2006 00:51:43 +1000
+
+libxaw (1:1.0.2-1) experimental; urgency=low
+
+  * New upstream version (X11R7.1).
+  * Use debhelper 5, update control, compat, use of dh_install to match.
+  * Handle libXaw.so.[67] in .install instead of .links (for
+    consistency since other symlinks such as libXaw7.so.7 are already
+    handled there).
+  * Exclude .la and Xaw8 from dh_install.
+  * Install Xaw man page with libxaw7-dev.
+
+ -- Drew Parsons <dparsons@debian.org>  Wed,  9 Aug 2006 22:38:21 +1000
+
+libxaw (1:1.0.1-6) UNRELEASED; urgency=low
+
+  * Test for obj-$(DEB_BUILD_GNU_TYPE) before creating it during build;
+    idempotency fix.
+  * Run dh_install w/ --list-missing.
+  * Bump standards version to 3.7.2.0.
+  * Version x11-common pre-dep in headers package to 1:7.0.0 to match
+    the rest of Debian.
+
+ -- Andres Salomon <dilinger@debian.org>  Mon, 17 Jul 2006 01:20:41 -0400
+
+libxaw (1:1.0.1-5) unstable; urgency=low
+
+  * Reorder makeshlib command in rules file so that ldconfig is run
+    properly. Thanks Drew Parsons and Steve Langasek.
+  * Add quilt to build-depends
+
+ -- David Nusinow <dnusinow@debian.org>  Tue, 18 Apr 2006 22:48:53 -0400
+
+libxaw (1:1.0.1-4) unstable; urgency=low
+
+  * Upload to unstable
+
+ -- David Nusinow <dnusinow@debian.org>  Thu, 23 Mar 2006 22:44:29 -0500
+
+libxaw (1:1.0.1-3) experimental; urgency=low
+
+  * Fix typo in debian/rules that allowed libxaw7 to get stripped without
+    saving the debugging symbols in the right package
+
+ -- David Nusinow <dnusinow@debian.org>  Tue, 21 Mar 2006 20:43:38 -0500
+
+libxaw (1:1.0.1-2) experimental; urgency=low
+
+  * Port patches from trunk
+    + general/012_Xaw_StripChart_fix.diff
+
+ -- David Nusinow <dnusinow@debian.org>  Sun, 26 Feb 2006 19:09:55 -0500
+
+libxaw (1:1.0.1-1) UNRLEASED; urgency=low
+
+  * First upload to Debian
+  * Add ed to build-depends. Thanks Eugene Konev. (seriously... ed!)
+
+ -- David Nusinow <dnusinow@debian.org>  Fri,  6 Jan 2006 00:44:17 -0500
+
+libxaw (7.0.2-3) breezy; urgency=low
+
+  * Add libxmu-dev and libxpm-dev to the libxaw-headers dependencies.:
+
+ -- Adam Conrad <adconrad@ubuntu.com>  Mon, 25 Jul 2005 05:46:47 +0000
+
+libxaw (7.0.2-2) breezy; urgency=low
+
+  * Bump Build-Depends on libx11-dev, libxt-dev, libxmu-dev, libxpm-dev, and
+    x11proto-core-dev to avoid _XOPEN_SOURCE.
+
+ -- Daniel Stone <daniel.stone@ubuntu.com>  Sat, 23 Jul 2005 00:31:45 +1000
+
+libxaw (7.0.2-1) breezy; urgency=low
+
+  * First libxaw release.
+
+ -- Daniel Stone <daniel.stone@ubuntu.com>  Mon, 16 May 2005 22:10:17 +1000
--- libxaw-1.0.7.orig/debian/compat
+++ libxaw-1.0.7/debian/compat
@@ -0,0 +1 @@
+5
--- libxaw-1.0.7.orig/debian/control
+++ libxaw-1.0.7/debian/control
@@ -0,0 +1,93 @@
+Source: libxaw
+Section: x11
+Priority: optional
+Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
+Uploaders: David Nusinow <dnusinow@debian.org>, Drew Parsons <dparsons@debian.org>, Brice Goglin <bgoglin@debian.org>, Julien Cristau <jcristau@debian.org>
+Build-Depends:
+ debhelper (>= 5),
+ libx11-dev (>= 1:0.99.2),
+ x11proto-core-dev (>= 7.0.1),
+ libxt-dev (>= 1:0.99.1),
+ libxmu-dev (>= 1:0.99.1),
+ libxpm-dev (>= 1:3.5.3),
+ pkg-config,
+ ed,
+ quilt,
+ dpkg-dev (>= 1.13.19),
+ autoconf,
+ automake,
+ libtool,
+ xutils-dev (>= 1:7.5~1),
+# specs
+ groff,
+ ghostscript,
+Standards-Version: 3.8.3
+Vcs-Git: git://git.debian.org/git/pkg-xorg/lib/libxaw
+Vcs-Browser: http://git.debian.org/?p=pkg-xorg/lib/libxaw.git
+
+Package: libxaw7
+Section: libs
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: X11 Athena Widget library
+ libXaw7 provides the second version of Xaw, the Athena Widgets tookit,
+ which is largely used by legacy X applications.  This version is the
+ most common version, as version 6 is considered deprecated, and version
+ 8, which adds Xprint support, is unsupported and not widely used.
+ In general, use of a more modern toolkit such as GTK+ is recommended.
+ .
+ More information about X.Org can be found at:
+ <URL:http://www.X.org>
+ <URL:http://xorg.freedesktop.org>
+ <URL:http://lists.freedesktop.org/mailman/listinfo/xorg>
+ .
+ This module can be found at
+ git://anongit.freedesktop.org/git/xorg/lib/libXaw
+
+Package: libxaw7-dbg
+Section: debug
+Architecture: any
+Priority: extra
+Depends: ${shlibs:Depends}, ${misc:Depends}, libxaw7 (= ${binary:Version})
+Description: X11 Athena Widget library (debug package)
+ libXaw7 provides the second version of Xaw, the Athena Widgets tookit,
+ which is largely used by legacy X applications.  This version is the
+ most common version, as version 6 is considered deprecated, and version
+ 8, which adds Xprint support, is unsupported and not widely used.
+ In general, use of a more modern toolkit such as GTK+ is recommended.
+ .
+ This package contains the debug versions of the library found in libxaw7.
+ Non-developers likely have little use for this package.
+ .
+ More information about X.Org can be found at:
+ <URL:http://www.X.org>
+ <URL:http://xorg.freedesktop.org>
+ <URL:http://lists.freedesktop.org/mailman/listinfo/xorg>
+ .
+ This module can be found at
+ git://anongit.freedesktop.org/git/xorg/lib/libXaw
+
+Package: libxaw7-dev
+Section: libdevel
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}, libxaw7 (= ${binary:Version}), libx11-dev, libxmu-dev, libxpm-dev, x11proto-core-dev
+Pre-Depends: x11-common (>= 1:7.0.0)
+Conflicts: libxaw6-dev, libxaw8-dev, libxaw-headers (<< 2:1.0.4-2)
+Replaces: libxaw6-dev, libxaw8-dev, libxaw-headers (<< 2:1.0.4-2)
+Description: X11 Athena Widget library (development headers)
+ libXaw7 provides the second version of Xaw, the Athena Widgets tookit,
+ which is largely used by legacy X applications.  This version is the
+ most common version, as version 6 is considered deprecated, and version
+ 8, which adds Xprint support, is unsupported and not widely used.
+ In general, use of a more modern toolkit such as GTK+ is recommended.
+ .
+ This package contains the development headers for the library found in
+ libxaw7.  Non-developers likely have little use for this package.
+ .
+ More information about X.Org can be found at:
+ <URL:http://www.X.org>
+ <URL:http://xorg.freedesktop.org>
+ <URL:http://lists.freedesktop.org/mailman/listinfo/xorg>
+ .
+ This module can be found at
+ git://anongit.freedesktop.org/git/xorg/lib/libXaw
--- libxaw-1.0.7.orig/debian/copyright
+++ libxaw-1.0.7/debian/copyright
@@ -0,0 +1,129 @@
+This package was downloaded from
+http://xorg.freedesktop.org/releases/individual/lib/
+
+Copyright (c) 1998 by The XFree86 Project, Inc.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the "Software"),
+to deal in the Software without restriction, including without limitation
+the rights to use, copy, modify, merge, publish, distribute, sublicense,
+and/or sell copies of the Software, and to permit persons to whom the
+Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
+Except as contained in this notice, the name of the XFree86 Project shall
+not be used in advertising or otherwise to promote the sale, use or other
+dealings in this Software without prior written authorization from the
+XFree86 Project.
+
+Copyright (c) 1991, 1994, 1998  The Open Group
+
+Permission to use, copy, modify, distribute, and sell this software and its
+documentation for any purpose is hereby granted without fee, provided that
+the above copyright notice appear in all copies and that both that
+copyright notice and this permission notice appear in supporting
+documentation.
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the name of The Open Group shall not be
+used in advertising or otherwise to promote the sale, use or other dealings
+in this Software without prior written authorization from The Open Group.
+
+Copyright 1987, 1988 by Digital Equipment Corporation, Maynard, Massachusetts.
+
+                        All Rights Reserved
+
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose and without fee is hereby granted,
+provided that the above copyright notice appear in all copies and that
+both that copyright notice and this permission notice appear in
+supporting documentation, and that the name of Digital not be
+used in advertising or publicity pertaining to distribution of the
+software without specific, written prior permission.
+
+DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
+DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+SOFTWARE.
+
+Copyright 1991 by OMRON Corporation
+
+Permission to use, copy, modify, distribute, and sell this software and its
+documentation for any purpose is hereby granted without fee, provided that
+the above copyright notice appear in all copies and that both that
+copyright notice and this permission notice appear in supporting
+documentation, and that the name of OMRON not be used in advertising
+or publicity pertaining to distribution of the software without specific,
+written prior permission.  OMRON makes no representations about the
+suitability of this software for any purpose.  It is provided "as is"
+without express or implied warranty.
+
+OMRON DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+EVENT SHALL OMRON BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+TORTUOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+PERFORMANCE OF THIS SOFTWARE.
+
+(c) Copyright 2003 Danny Backx <danny.backx@skynet.be>
+(c) Copyright 2003-2004 Roland Mainz <roland.mainz@nrubsig.org>
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the copyright holders shall
+not be used in advertising or otherwise to promote the sale, use or other
+dealings in this Software without prior written authorization from said
+copyright holders.
+
+Copyright 1989 Prentice Hall
+
+Permission to use, copy, modify, and distribute this software for any
+purpose and without fee is hereby granted, provided that the above
+copyright notice appear in all copies and that both the copyright notice
+and this permission notice appear in supporting documentation.
+
+Prentice Hall and the authors disclaim all warranties with regard
+to this software, including all implied warranties of merchantability and
+fitness.  In no event shall Prentice Hall or the authors be liable
+for any special, indirect or cosequential damages or any damages whatsoever
+resulting from loss of use, data or profits, whether in an action of
+contract, negligence or other tortious action, arising out of or in
+connection with the use or performance of this software.
--- libxaw-1.0.7.orig/debian/README.source
+++ libxaw-1.0.7/debian/README.source
@@ -0,0 +1,73 @@
+------------------------------------------------------
+Quick Guide To Patching This Package For The Impatient
+------------------------------------------------------
+
+1. Make sure you have quilt installed
+2. Unpack the package as usual with "dpkg-source -x"
+3. Run the "patch" target in debian/rules
+4. Create a new patch with "quilt new" (see quilt(1))
+5. Edit all the files you want to include in the patch with "quilt edit" 
+   (see quilt(1)).
+6. Write the patch with "quilt refresh" (see quilt(1))
+7. Run the "clean" target in debian/rules
+
+Alternatively, instead of using quilt directly, you can drop the patch in to 
+debian/patches and add the name of the patch to debian/patches/series.
+
+------------------------------------
+Guide To The X Strike Force Packages
+------------------------------------
+
+The X Strike Force team maintains X packages in git repositories on
+git.debian.org in the pkg-xorg subdirectory. Most upstream packages
+are actually maintained in git repositories as well, so they often
+just need to be pulled into git.debian.org in a "upstream-*" branch.
+Otherwise, the upstream sources are manually installed in the Debian
+git repository.
+
+The .orig.tar.gz upstream source file could be generated this
+"upstream-*" branch in the Debian git repository but it is actually
+copied from upstream tarballs directly.
+
+Due to X.org being highly modular, packaging all X.org applications
+as their own independent packages would have created too many Debian
+packages. For this reason, some X.org applications have been grouped
+into larger packages: xutils, xutils-dev, x11-apps, x11-session-utils,
+x11-utils, x11-xfs-utils, x11-xkb-utils, x11-xserver-utils.
+Most packages, including the X.org server itself and all libraries
+and drivers are, however maintained independently.
+
+The Debian packaging is added by creating the "debian-*" git branch
+which contains the aforementioned "upstream-*" branch plus the debian/
+repository files.
+When a patch has to be applied to the Debian package, two solutions
+are involved:
+* If the patch is available in one of the upstream branches, it
+  may be git'cherry-picked into the Debian repository. In this
+  case, it appears directly in the .diff.gz.
+* Otherwise, the patch is added to debian/patches/ which is managed
+  with quilt as documented in /usr/share/doc/quilt/README.source.
+
+quilt is actually invoked by the Debian X packaging through a larger
+set of scripts called XSFBS. XSFBS brings some other X specific
+features such as managing dependencies and conflicts due to the video
+and input driver ABIs.
+XSFBS itself is maintained in a separate repository at
+  git://git.debian.org/pkg-xorg/xsfbs.git
+and it is pulled inside the other Debian X repositories when needed.
+
+The XSFBS patching system requires a build dependency on quilt. Also
+a dependency on $(STAMP_DIR)/patch has to be added to debian/rules
+so that the XSFBS patching occurs before the actual build. So the
+very first target of the build (likely the one running autoreconf)
+should depend on $(STAMP_DIR)/patch. It should also not depend on
+anything so that parallel builds are correctly supported (nothing
+should probably run while patching is being done). And finally, the
+clean target should depend on the xsfclean target so that patches
+are unapplied on clean.
+
+When the upstream sources contain some DFSG-nonfree files, they are
+listed in text files in debian/prune/ in the "debian-*" branch of
+the Debian repository. XSFBS' scripts then take care of removing
+these listed files during the build so as to generate a modified
+DFSG-free .orig.tar.gz tarball.
--- libxaw-1.0.7.orig/debian/libxaw7-dev.install
+++ libxaw-1.0.7/debian/libxaw7-dev.install
@@ -0,0 +1,6 @@
+usr/lib/libXaw7.a
+usr/lib/libXaw7.so
+usr/lib/pkgconfig/xaw7.pc
+usr/include/X11/*
+usr/share/man/man3/*
+usr/share/doc/libXaw/* usr/share/doc/libxaw7-dev
--- libxaw-1.0.7.orig/debian/libxaw7-dev.links
+++ libxaw-1.0.7/debian/libxaw7-dev.links
@@ -0,0 +1 @@
+usr/lib/libXaw7.so usr/lib/libXaw.so
--- libxaw-1.0.7.orig/debian/libxaw7.install
+++ libxaw-1.0.7/debian/libxaw7.install
@@ -0,0 +1,2 @@
+usr/lib/libXaw7.so.7*
+usr/lib/libXaw.so.7
--- libxaw-1.0.7.orig/debian/rules
+++ libxaw-1.0.7/debian/rules
@@ -0,0 +1,104 @@
+#!/usr/bin/make -f
+# debian/rules for the Debian libxaw package.
+# Copyright © 2004 Scott James Remnant <scott@netsplit.com>
+# Copyright © 2005 Daniel Stone <daniel@fooishbar.org>
+# Copyright © 2005 David Nusinow <dnusinow@debian.org>
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+include debian/xsfbs/xsfbs.mk
+
+CFLAGS = -Wall -g
+ifneq (,$(filter noopt,$(DEB_BUILD_OPTIONS)))
+	CFLAGS += -O0
+else
+	CFLAGS += -O2
+endif
+ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+	NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+	MAKEFLAGS += -j$(NUMJOBS)
+endif
+
+DEB_HOST_ARCH      ?= $(shell dpkg-architecture -qDEB_HOST_ARCH)
+DEB_HOST_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE))
+	confflags += --build=$(DEB_HOST_GNU_TYPE)
+else
+	confflags += --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE)
+endif
+
+configure: $(STAMP_DIR)/patch
+	autoreconf -vfi
+
+obj-$(DEB_BUILD_GNU_TYPE)/config.status: configure
+	mkdir -p obj-$(DEB_BUILD_GNU_TYPE)
+	cd obj-$(DEB_BUILD_GNU_TYPE) && \
+	../configure --prefix=/usr --mandir=\$${prefix}/share/man \
+	             --infodir=\$${prefix}/share/info $(confflags) \
+	             --disable-xaw6 --disable-xaw8 \
+	             --enable-docs \
+	             CFLAGS="$(CFLAGS)"
+
+build: build-stamp
+build-stamp: obj-$(DEB_BUILD_GNU_TYPE)/config.status
+	dh_testdir
+
+	cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE)
+
+	touch build-stamp
+
+clean: xsfclean
+	dh_testdir
+	dh_testroot
+	rm -f build-stamp
+
+	rm -f config.cache config.log config.status
+	rm -f */config.cache */config.log */config.status
+	rm -f conftest* */conftest*
+	rm -rf autom4te.cache */autom4te.cache
+	rm -rf obj-*
+	rm -f $$(find -name Makefile.in)
+	rm -f compile config.guess config.sub configure depcomp install-sh
+	rm -f ltmain.sh missing INSTALL aclocal.m4 mkinstalldirs config.h.in
+
+	dh_clean
+
+install: build
+	dh_testdir
+	dh_testroot
+	dh_clean -k
+	dh_installdirs
+
+	cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install
+	# the generated html looks ugly, don't ship it
+	rm -f debian/tmp/usr/share/doc/libXaw/widgets.html
+
+# Build architecture-dependent files here.
+binary-arch: build install
+	dh_testdir
+	dh_testroot
+
+	dh_installdocs
+	dh_install --sourcedir=debian/tmp --list-missing --exclude=.la
+	dh_installman
+	dh_installchangelogs ChangeLog
+	dh_link
+	dh_strip -Nlibxaw7
+	dh_strip -plibxaw7 --dbg-package=libxaw7-dbg
+	dh_compress
+	dh_fixperms
+	dh_makeshlibs
+	dh_shlibdeps
+	dh_installdeb
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb
+
+# Build architecture-independent files here.
+binary-indep: build install
+# Nothing to do
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install
--- libxaw-1.0.7.orig/debian/watch
+++ libxaw-1.0.7/debian/watch
@@ -0,0 +1,2 @@
+version=3
+http://xorg.freedesktop.org/releases/individual/lib/ libXaw-(.*)\.tar\.gz
--- libxaw-1.0.7.orig/debian/patches/01_Xaw_StripChart_fix.diff
+++ libxaw-1.0.7/debian/patches/01_Xaw_StripChart_fix.diff
@@ -0,0 +1,102 @@
+From: "Nikita V. Youshchenko" <yoush@cs.msu.su>
+Date: Sat, 02 Nov 2002 17:57:13 +0300
+Subject: A bug in Xaw/StripChart.c causes incorrect scale lines in xload window
+
+Recently I tried to run xload on a high loaded server (load was more
+than 10), and discovered that if window size is rather small, scale
+lines are drawn incorrectly (upper than needed).
+
+This is caused by a bug in Xaw/StripChart.c.
+It draws lines with fixed integer steps. Than means that if window
+height is 39 pixels, and 10 lines should be drawn to split view into 11
+equal parts, lines will be drawn at 3, 6, 9, ,.., 30. So the bottom part
+height will be 9 pixels while other parts height will be 2 pixels.
+
+This patch makes part heights differ no more than by 1 pixel.
+
+Debian bug#167448 <http://bugs.debian.org/167448>
+
+Index: libXaw-X11R7.0-1.0.1/src/StripChart.c
+===================================================================
+--- libXaw-X11R7.0-1.0.1.orig/src/StripChart.c	2005-12-30 14:50:24.000000000 -0500
++++ libXaw-X11R7.0-1.0.1/src/StripChart.c	2006-02-26 19:09:07.000000000 -0500
+@@ -373,12 +373,12 @@
+  * the returned value is identical to the initial value of next and data is
+  * unchanged.  Otherwise keeps half a window's worth of data.  If data is
+  * changed, then w->strip_chart.max_value is updated to reflect the
+- * largest data point
++ * largest data point.
+  */
+-static int 
++static int
+ repaint_window(StripChartWidget w, int left, int width)
+ {
+-    int i, j;
++    int i, j, k;
+     int next = w->strip_chart.interval;
+     int scale = w->strip_chart.scale;
+     int scalewidth = 0;
+@@ -423,8 +423,10 @@
+ 	}
+ 
+ 	/* Draw graph reference lines */
++	k = XtHeight(w) % w->strip_chart.scale;
+ 	for (i = 1; i < w->strip_chart.scale; i++) {
+-	    j = i * ((int)XtHeight(w) / w->strip_chart.scale);
++	    j = i * (XtHeight(w) / w->strip_chart.scale) +
++		((i * k + w->strip_chart.scale/2) / w->strip_chart.scale);
+ 	    XDrawLine(dpy, win, w->strip_chart.hiGC, left, j, scalewidth, j);
+ 	}
+     }
+@@ -446,7 +448,7 @@
+ MoveChart(StripChartWidget w, Bool blit)
+ {
+     double old_max;
+-    int left, i, j;
++    int left, i, j, k;
+     int next = w->strip_chart.interval;
+ 
+     if (!XtIsRealized((Widget)w))
+@@ -495,8 +497,10 @@
+ 
+     /* Draw graph reference lines */
+     left = j;
++    k = XtHeight(w) % w->strip_chart.scale;
+     for (i = 1; i < w->strip_chart.scale; i++) {
+-	j = i * (XtHeight(w) / w->strip_chart.scale);
++	j = i * (XtHeight(w) / w->strip_chart.scale) +
++	    ((i * k + w->strip_chart.scale/2) / w->strip_chart.scale);
+ 	XDrawLine(XtDisplay((Widget)w), XtWindow((Widget)w),
+ 		  w->strip_chart.hiGC, left, j, XtWidth(w), j);
+     }
+@@ -557,23 +561,26 @@
+     StripChartWidget w = (StripChartWidget)widget;
+     XPoint *points;
+     Cardinal size;
+-    int i;
++    int i, k;
+ 
+     if (w->strip_chart.scale <= 1) {
+ 	XtFree((char *)w->strip_chart.points);
+ 	w->strip_chart.points = NULL;
+ 	return;
+     }
+-    
++
+     size = sizeof(XPoint) * (w->strip_chart.scale - 1);
+ 
+     points = (XPoint *)XtRealloc((XtPointer)w->strip_chart.points, size);
+     w->strip_chart.points = points;
+ 
+     /* Draw graph reference lines into clip mask */
+-
++    k = XtHeight(w) % w->strip_chart.scale;
+     for (i = 1; i < w->strip_chart.scale; i++) {
+ 	points[i - 1].x = 0;
+-	points[i - 1].y = XtHeight(w) / w->strip_chart.scale;
++	points[i - 1].y = i * (XtHeight(w) / w->strip_chart.scale) +
++	    ((i * k + w->strip_chart.scale/2) / w->strip_chart.scale);
+     }
++    for (i = w->strip_chart.scale - 1; i > 1; i--)
++	points[i - 1].y -= points[i - 2].y;
+ }
--- libxaw-1.0.7.orig/debian/patches/series
+++ libxaw-1.0.7/debian/patches/series
@@ -0,0 +1 @@
+01_Xaw_StripChart_fix.diff
--- libxaw-1.0.7.orig/debian/xsfbs/xsfbs.mk
+++ libxaw-1.0.7/debian/xsfbs/xsfbs.mk
@@ -0,0 +1,276 @@
+#!/usr/bin/make -f
+
+# Debian X Strike Force Build System (XSFBS): Make portion
+
+# Copyright 1996 Stephen Early
+# Copyright 1997 Mark Eichin
+# Copyright 1998-2005, 2007 Branden Robinson
+# Copyright 2005 David Nusinow
+#
+# Licensed under the GNU General Public License, version 2.  See the file
+# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
+
+# Originally by Stephen Early <sde1000@debian.org>
+# Modified by Mark W. Eichin <eichin@kitten.gen.ma.us>
+# Modified by Adam Heath <doogie@debian.org>
+# Modified by Branden Robinson <branden@debian.org>
+# Modified by Fabio Massimo Di Nitto <fabbione@fabbione.net>
+# Modified by David Nusinow <dnusinow@debian.org>
+# Acknowledgements to Manoj Srivastava.
+
+# Pass $(DH_OPTIONS) into the environment for debhelper's benefit.
+export DH_OPTIONS
+
+# force quilt to not use ~/.quiltrc and to use debian/patches
+QUILT = QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null
+
+# Set up parameters for the upstream build environment.
+
+# Determine (source) package name from Debian changelog.
+SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \
+                        | grep '^Source:' | awk '{print $$2}')
+
+# Determine package version from Debian changelog.
+SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \
+                        | grep '^Version:' | awk '{print $$2}')
+
+# Determine upstream version number.
+UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//')
+
+# Determine the source version without the epoch for make-orig-tar-gz
+NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://')
+
+# Figure out who's building this package.
+BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}})
+
+# Find out if this is an official build; an official build has nothing but
+# digits, dots, and/or the codename of a release in the Debian part of the
+# version number.  Anything else indicates an unofficial build.
+OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\|etch\|lenny\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi)
+
+# Set up parameters for the Debian build environment.
+
+# Determine our architecture.
+BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH)
+# Work around some old-time dpkg braindamage.
+BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH))
+# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy.
+ifdef DEB_HOST_ARCH
+ ARCH:=$(DEB_HOST_ARCH)
+else
+ # dpkg-cross sets the ARCH environment variable; if set, use it.
+ ifdef ARCH
+  ARCH:=$(ARCH)
+ else
+  ARCH:=$(BUILD_ARCH)
+ endif
+endif
+
+# $(STAMP_DIR) houses stamp files for complex targets.
+STAMP_DIR:=stampdir
+
+# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place
+# their files.
+DEBTREEDIR:=$(CURDIR)/debian/tmp
+
+# All "important" targets have four lines:
+#   1) A target name that is invoked by a package-building tool or the user.
+#      This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart.
+#   2) A line delcaring 1) as a phony target (".PHONY:").
+#   3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may
+#   depend on other targets.
+#   4) A line declaring 3) as a member of the $(stampdir_targets) variable; the
+#   "$(STAMP_DIR)/" prefix is omitted.
+#
+# This indirection is needed so that the "stamp" files that signify when a rule
+# is done can be located in a separate "stampdir".  Recall that make has no way
+# to know when a goal has been met for a phony target (like "build" or
+# "install").
+#
+# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@"
+# so that the target will not be run again.  Removing the file will make Make
+# run the target over.
+
+# All phony targets should be declared as dependencies of .PHONY, even if they
+# do not have "($STAMP_DIR)/"-prefixed counterparts.
+
+# Define a harmless default rule to keep things from going nuts by accident.
+.PHONY: default
+default:
+
+# Set up the $(STAMP_DIR) directory.
+.PHONY: stampdir
+stampdir_targets+=stampdir
+stampdir: $(STAMP_DIR)/stampdir
+$(STAMP_DIR)/stampdir:
+	mkdir $(STAMP_DIR)
+	>$@
+
+# Set up the package build directory as quilt expects to find it.
+.PHONY: prepare
+stampdir_targets+=prepare
+prepare: $(STAMP_DIR)/prepare
+$(STAMP_DIR)/prepare: $(STAMP_DIR)/log $(STAMP_DIR)/genscripts
+	>$@
+
+.PHONY: log
+stampdir_targets+=log
+log: $(STAMP_DIR)/log
+$(STAMP_DIR)/log: $(STAMP_DIR)/stampdir
+	mkdir -p $(STAMP_DIR)/log
+
+# Apply all patches to the upstream source.
+.PHONY: patch
+stampdir_targets+=patch
+patch: $(STAMP_DIR)/patch
+$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare
+	if ! [ `which quilt` ]; then \
+		echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \
+		exit 1; \
+	fi; \
+	if $(QUILT) next >/dev/null 2>&1; then \
+	  echo -n "Applying patches..."; \
+	  if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \
+	    cat $(STAMP_DIR)/log/patch; \
+	    echo "successful."; \
+	  else \
+	    cat $(STAMP_DIR)/log/patch; \
+	    echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \
+	    exit 1; \
+	  fi; \
+	else \
+	  echo "No patches to apply"; \
+	fi; \
+	>$@
+
+# Revert all patches to the upstream source.
+.PHONY: unpatch
+unpatch: $(STAMP_DIR)/log
+	rm -f $(STAMP_DIR)/patch
+	@echo -n "Unapplying patches..."; \
+	if $(QUILT) applied >/dev/null 2>/dev/null; then \
+	  if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \
+	    cat $(STAMP_DIR)/log/unpatch; \
+	    echo "successful."; \
+	  else \
+	    cat $(STAMP_DIR)/log/unpatch; \
+	    echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \
+	    exit 1; \
+	  fi; \
+	else \
+	  echo "nothing to do."; \
+	fi
+
+# Clean the generated maintainer scripts.
+.PHONY: cleanscripts
+cleanscripts:
+	rm -f $(STAMP_DIR)/genscripts
+	rm -f debian/*.config \
+	      debian/*.postinst \
+	      debian/*.postrm \
+	      debian/*.preinst \
+	      debian/*.prerm
+
+# Clean the package build tree.
+.PHONY: xsfclean
+xsfclean: cleanscripts unpatch
+	dh_testdir
+	rm -rf .pc
+	rm -rf $(STAMP_DIR)
+	dh_clean
+
+# Remove files from the upstream source tree that we don't need, or which have
+# licensing problems.  It must be run before creating the .orig.tar.gz.
+#
+# Note: This rule is for Debian package maintainers' convenience, and is not
+# needed for conventional build scenarios.
+.PHONY: prune-upstream-tree
+prune-upstream-tree:
+	# Ensure we're in the correct directory.
+	dh_testdir
+	grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf
+
+# Verify that there are no offsets or fuzz in the patches we apply.
+#
+# Note: This rule is for Debian package maintainers' convenience, and is not
+# needed for conventional build scenarios.
+.PHONY: patch-audit
+patch-audit: prepare unpatch
+	@echo -n "Auditing patches..."; \
+	>$(STAMP_DIR)/log/patch; \
+	FUZZY=; \
+	while [ -n "$$($(QUILT) next)" ]; do \
+	  RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\
+	  case "$$RESULT" in \
+	    succeeded) \
+	      echo "fuzzy patch: $$($(QUILT) top)" \
+	        | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \
+	      FUZZY=yes; \
+	      ;; \
+	    FAILED) \
+	      echo "broken patch: $$($(QUILT) next)" \
+	        | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \
+	      exit 1; \
+	      ;; \
+	  esac; \
+	done; \
+	if [ -n "$$FUZZY" ]; then \
+	  echo "there were fuzzy patches; please fix."; \
+	  exit 1; \
+	else \
+	  echo "done."; \
+	fi
+
+# Generate the maintainer scripts.
+.PHONY: genscripts
+stampdir_targets+=genscripts
+genscripts: $(STAMP_DIR)/genscripts
+$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir
+	for FILE in debian/*.config.in \
+	            debian/*.postinst.in \
+	            debian/*.postrm.in \
+	            debian/*.preinst.in \
+	            debian/*.prerm.in; do \
+	  if [ -e "$$FILE" ]; then \
+	    MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \
+	    sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \
+	      | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \
+	    cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \
+	    sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \
+	      | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \
+	    sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \
+	        -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \
+	      <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \
+	    rm $$MAINTSCRIPT.tmp; \
+	  fi; \
+	done
+	# Validate syntax of generated shell scripts.
+	#sh debian/scripts/validate-posix-sh debian/*.config \
+	#                                    debian/*.postinst \
+	#                                    debian/*.postrm \
+	#                                    debian/*.preinst \
+	#                                    debian/*.prerm
+	>$@
+
+SERVERMINVERS = $(shell cat /usr/share/xserver-xorg/serverminver 2>/dev/null)
+VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null)
+INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null)
+SERVER_DEPENDS = xserver-xorg-core (>= $(SERVERMINVERS))
+VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI)
+INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI)
+ifeq ($(PACKAGE),)
+PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control)
+endif
+
+.PHONY: serverabi
+serverabi: install
+ifeq ($(SERVERMINVERS),)
+	@echo error: xserver-xorg-dev needs to be installed
+	@exit 1
+else
+	echo "xserver:Depends=$(SERVER_DEPENDS)" >> debian/$(PACKAGE).substvars
+	echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
+	echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
+endif
+
+# vim:set noet ai sts=8 sw=8 tw=0:
--- libxaw-1.0.7.orig/debian/xsfbs/xsfbs.sh
+++ libxaw-1.0.7/debian/xsfbs/xsfbs.sh
@@ -0,0 +1,622 @@
+# This is the X Strike Force shell library for X Window System package
+# maintainer scripts.  It serves to define shell functions commonly used by
+# such packages, and performs some error checking necessary for proper operation
+# of those functions.  By itself, it does not "do" much; the maintainer scripts
+# invoke the functions defined here to accomplish package installation and
+# removal tasks.
+
+# If you are reading this within a Debian package maintainer script (e.g.,
+# /var/lib/dpkg/info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can
+# skip past this library by scanning forward in this file to the string
+# "GOBSTOPPER".
+
+SOURCE_VERSION=@SOURCE_VERSION@
+OFFICIAL_BUILD=@OFFICIAL_BUILD@
+
+# Use special abnormal exit codes so that problems with this library are more
+# easily tracked down.
+SHELL_LIB_INTERNAL_ERROR=86
+SHELL_LIB_THROWN_ERROR=74
+SHELL_LIB_USAGE_ERROR=99
+
+# old -> new variable names
+if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then
+  DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE"
+fi
+if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then
+  DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF"
+fi
+
+# initial sanity checks
+if [ -z "$THIS_PACKAGE" ]; then
+  cat >&2 <<EOF
+Error: package maintainer script attempted to use shell library without
+definining \$THIS_PACKAGE shell variable.  Please report the package name,
+version, and the text of this error message to the Debian Bug Tracking System.
+Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
+instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
+"doc-debian" package, or install the "reportbug" package and use the command of
+the same name to file a report against version $SOURCE_VERSION of this package.
+EOF
+  exit $SHELL_LIB_USAGE_ERROR
+fi
+
+if [ -z "$THIS_SCRIPT" ]; then
+  cat >&2 <<EOF
+Error: package maintainer script attempted to use shell library without
+definining \$THIS_SCRIPT shell variable.  Please report the package name,
+version, and the text of this error message to the Debian Bug Tracking System.
+Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
+instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
+"doc-debian" package, or install the "reportbug" package and use the command of
+the same name to file a report against version $SOURCE_VERSION of the
+"$THIS_PACKAGE" package.
+EOF
+  exit $SHELL_LIB_USAGE_ERROR
+fi
+
+if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then
+  RECONFIGURE="true"
+else
+  RECONFIGURE=
+fi
+
+if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then
+  FIRSTINST="yes"
+fi
+
+if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then
+  UPGRADE="yes"
+fi
+
+trap "message;\
+      message \"Received signal.  Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\
+      message;\
+      exit 1" HUP INT QUIT TERM
+
+reject_nondigits () {
+  # syntax: reject_nondigits [ operand ... ]
+  #
+  # scan operands (typically shell variables whose values cannot be trusted) for
+  # characters other than decimal digits and barf if any are found
+  while [ -n "$1" ]; do
+    # does the operand contain anything but digits?
+    if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then
+      # can't use die(), because it wraps message() which wraps this function
+      echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \
+           "possibly malicious garbage \"$1\"" >&2
+      exit $SHELL_LIB_THROWN_ERROR
+    fi
+    shift
+  done
+}
+
+reject_unlikely_path_chars () {
+  # syntax: reject_unlikely_path_chars [ operand ... ]
+  #
+  # scan operands (typically shell variables whose values cannot be trusted) for
+  # characters unlikely to be seen in a path and which the shell might
+  # interpret and barf if any are found
+  while [ -n "$1" ]; do
+    # does the operand contain any funny characters?
+    if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then
+      # can't use die(), because I want to avoid forward references
+      echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \
+           "encountered possibly malicious garbage \"$1\"" >&2
+      exit $SHELL_LIB_THROWN_ERROR
+    fi
+    shift
+  done
+}
+
+# Query the terminal to establish a default number of columns to use for
+# displaying messages to the user.  This is used only as a fallback in the
+# event the COLUMNS variable is not set.  ($COLUMNS can react to SIGWINCH while
+# the script is running, and this cannot, only being calculated once.)
+DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true
+if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then
+  DEFCOLUMNS=80
+fi
+
+message () {
+  # pretty-print messages of arbitrary length
+  reject_nondigits "$COLUMNS"
+  echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2
+}
+
+observe () {
+  # syntax: observe message ...
+  #
+  # issue observational message suitable for logging someday when support for
+  # it exists in dpkg
+  if [ -n "$DEBUG_XORG_PACKAGE" ]; then
+    message "$THIS_PACKAGE $THIS_SCRIPT note: $*"
+  fi
+}
+
+warn () {
+  # syntax: warn message ...
+  #
+  # issue warning message suitable for logging someday when support for
+  # it exists in dpkg; also send to standard error
+  message "$THIS_PACKAGE $THIS_SCRIPT warning: $*"
+}
+
+die () {
+  # syntax: die message ...
+  #
+  # exit script with error message
+  message "$THIS_PACKAGE $THIS_SCRIPT error: $*"
+  exit $SHELL_LIB_THROWN_ERROR
+}
+
+internal_error () {
+  # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message
+  message "internal error: $*"
+  if [ -n "$OFFICIAL_BUILD" ]; then
+    message "Please report a bug in the $THIS_SCRIPT script of the" \
+            "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
+            "Tracking System.  Include all messages above that mention the" \
+            "$THIS_PACKAGE package.  Visit " \
+            "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
+            "instructions, read the file" \
+            "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
+            "package, or install the reportbug package and use the command of" \
+            "the same name to file a report."
+  fi
+  exit $SHELL_LIB_INTERNAL_ERROR
+}
+
+usage_error () {
+  message "usage error: $*"
+  message "Please report a bug in the $THIS_SCRIPT script of the" \
+          "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
+          "Tracking System.  Include all messages above that mention the" \
+          "$THIS_PACKAGE package.  Visit " \
+          "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
+          "instructions, read the file" \
+          "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
+          "package, or install the reportbug package and use the command of" \
+          "the same name to file a report."
+  exit $SHELL_LIB_USAGE_ERROR
+}
+
+font_update () {
+  # run $UPDATECMDS in $FONTDIRS
+
+  local dir cmd shortcmd x_font_dir_prefix
+
+  x_font_dir_prefix="/usr/share/fonts/X11"
+
+  if [ -z "$UPDATECMDS" ]; then
+    usage_error "font_update() called but \$UPDATECMDS not set"
+  fi
+  if [ -z "$FONTDIRS" ]; then
+    usage_error "font_update() called but \$FONTDIRS not set"
+  fi
+
+  reject_unlikely_path_chars "$UPDATECMDS"
+  reject_unlikely_path_chars "$FONTDIRS"
+
+  for dir in $FONTDIRS; do
+    if [ -d "$x_font_dir_prefix/$dir" ]; then
+      for cmd in $UPDATECMDS; do
+        if which "$cmd" > /dev/null 2>&1; then
+          shortcmd=${cmd##*/}
+          observe "running $shortcmd in $dir font directory"
+	  cmd_opts=
+          if [ "$shortcmd" = "update-fonts-alias" ]; then
+            cmd_opts=--x11r7-layout
+          fi
+          if [ "$shortcmd" = "update-fonts-dir" ]; then
+            cmd_opts=--x11r7-layout
+          fi
+          if [ "$shortcmd" = "update-fonts-scale" ]; then
+            cmd_opts=--x11r7-layout
+          fi
+          $cmd $cmd_opts $dir || warn "$cmd $cmd_opts $dir" \
+                              "failed; font directory data may not" \
+                              "be up to date"
+        else
+          warn "$cmd not found; not updating corresponding $dir font" \
+               "directory data"
+        fi
+      done
+    else
+      warn "$dir is not a directory; not updating font directory data"
+    fi
+  done
+}
+
+remove_conffile_prepare () {
+  # syntax: remove_conffile_prepare filename official_md5sum ...
+  #
+  # Check a conffile "filename" against a list of canonical MD5 checksums.
+  # If the file's current MD5 checksum matches one of the "official_md5sum"
+  # operands provided, then prepare the conffile for removal from the system.
+  # We defer actual deletion until the package is configured so that we can
+  # roll this operation back if package installation fails.
+  #
+  # Call this function from a preinst script in the event $1 is "upgrade" or
+  # "install" and verify $2 to ensure the package is being upgraded from a
+  # version (or installed over a version removed-but-not-purged) prior to the
+  # one in which the conffile was obsoleted.
+
+  local conffile current_checksum
+
+  # validate arguments
+  if [ $# -lt 2 ]; then
+    usage_error "remove_conffile_prepare() called with wrong number of" \
+                "arguments; expected at least 2, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  conffile="$1"
+  shift
+
+  # does the conffile even exist?
+  if [ -e "$conffile" ]; then
+    # calculate its checksum
+    current_checksum=$(md5sum < "$conffile" | sed 's/[[:space:]].*//')
+    # compare it to each supplied checksum
+    while [ -n "$1" ]; do
+      if [ "$current_checksum" = "$1" ]; then
+        # we found a match; move the confffile and stop looking
+        observe "preparing obsolete conffile $conffile for removal"
+        mv "$conffile" "$conffile.$THIS_PACKAGE-tmp"
+        break
+      fi
+      shift
+    done
+  fi
+}
+
+remove_conffile_lookup () {
+  # syntax: remove_conffile_lookup package filename
+  #
+  # Lookup the md5sum of a conffile in dpkg's database, and prepare for removal
+  # if it matches the actual file's md5sum.
+  #
+  # Call this function when you would call remove_conffile_prepare but only
+  # want to check against dpkg's status database instead of known checksums.
+
+  local package conffile old_md5sum
+
+  # validate arguments
+  if [ $# -ne 2 ]; then
+    usage_error "remove_conffile_lookup() called with wrong number of" \
+                "arguments; expected 1, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  package="$1"
+  conffile="$2"
+
+  if ! [ -e "$conffile" ]; then
+    return
+  fi
+  old_md5sum="$(dpkg-query -W -f='${Conffiles}' "$package" | \
+    awk '{ if (match($0, "^ '"$conffile"' ")) print $2}')"
+  if [ -n "$old_md5sum" ]; then
+    remove_conffile_prepare "$conffile" "$old_md5sum"
+  fi
+}
+
+remove_conffile_commit () {
+  # syntax: remove_conffile_commit filename
+  #
+  # Complete the removal of a conffile "filename" that has become obsolete.
+  #
+  # Call this function from a postinst script after having used
+  # remove_conffile_prepare() in the preinst.
+
+  local conffile
+
+  # validate arguments
+  if [ $# -ne 1 ]; then
+    usage_error "remove_conffile_commit() called with wrong number of" \
+                "arguments; expected 1, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  conffile="$1"
+
+  # if the temporary file created by remove_conffile_prepare() exists, remove it
+  if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
+    observe "committing removal of obsolete conffile $conffile"
+    rm "$conffile.$THIS_PACKAGE-tmp"
+  fi
+}
+
+remove_conffile_rollback () {
+  # syntax: remove_conffile_rollback filename
+  #
+  # Roll back the removal of a conffile "filename".
+  #
+  # Call this function from a postrm script in the event $1 is "abort-upgrade"
+  # or "abort-install" is  after having used remove_conffile_prepare() in the
+  # preinst.
+
+  local conffile
+
+  # validate arguments
+  if [ $# -ne 1 ]; then
+    usage_error "remove_conffile_rollback() called with wrong number of" \
+                "arguments; expected 1, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  conffile="$1"
+
+  # if the temporary file created by remove_conffile_prepare() exists, move it
+  # back
+  if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
+    observe "rolling back removal of obsolete conffile $conffile"
+    mv "$conffile.$THIS_PACKAGE-tmp" "$conffile"
+  fi
+}
+
+replace_conffile_with_symlink_prepare () {
+  # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \
+  # official_md5sum ...
+  #
+  # Check a conffile "oldfilename" against a list of canonical MD5 checksums.
+  # If the file's current MD5 checksum matches one of the "official_md5sum"
+  # operands provided, then prepare the conffile for removal from the system.
+  # We defer actual deletion until the package is configured so that we can
+  # roll this operation back if package installation fails. Otherwise copy it
+  # to newfilename and let dpkg handle it through conffiles mechanism.
+  #
+  # Call this function from a preinst script in the event $1 is "upgrade" or
+  # "install" and verify $2 to ensure the package is being upgraded from a
+  # version (or installed over a version removed-but-not-purged) prior to the
+  # one in which the conffile was obsoleted.
+
+  local conffile current_checksum
+
+  # validate arguments
+  if [ $# -lt 3 ]; then
+    usage_error "replace_conffile_with_symlink_prepare() called with wrong" \
+                " number of arguments; expected at least 3, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  oldconffile="$1"
+  shift
+  newconffile="$1"
+  shift
+
+  remove_conffile_prepare "$_oldconffile" "$@"
+  # If $oldconffile still exists, then md5sums didn't match.
+  # Copy it to new one.
+  if [ -f "$oldconffile" ]; then
+    cp "$oldconffile" "$newconffile"
+  fi
+
+}
+
+replace_conffile_with_symlink_commit () {
+  # syntax: replace_conffile_with_symlink_commit oldfilename
+  #
+  # Complete the removal of a conffile "oldfilename" that has been
+  # replaced by a symlink.
+  #
+  # Call this function from a postinst script after having used
+  # replace_conffile_with_symlink_prepare() in the preinst.
+
+  local conffile
+
+  # validate arguments
+  if [ $# -ne 1 ]; then
+    usage_error "replace_conffile_with_symlink_commit() called with wrong" \
+                "number of arguments; expected 1, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  conffile="$1"
+
+  remove_conffile_commit "$conffile"
+}
+
+replace_conffile_with_symlink_rollback () {
+  # syntax: replace_conffile_with_symlink_rollback oldfilename newfilename
+  #
+  # Roll back the replacing of a conffile "oldfilename" with symlink to
+  # "newfilename".
+  #
+  # Call this function from a postrm script in the event $1 is "abort-upgrade"
+  # or "abort-install" and verify $2 to ensure the package failed to upgrade
+  # from a version (or install over a version removed-but-not-purged) prior
+  # to the one in which the conffile was obsoleted.
+  # You should have  used replace_conffile_with_symlink_prepare() in the
+  # preinst.
+
+  local conffile
+
+  # validate arguments
+  if [ $# -ne 2 ]; then
+    usage_error "replace_conffile_with_symlink_rollback() called with wrong" \
+                "number of arguments; expected 2, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  oldconffile="$1"
+  newconffile="$2"
+
+  remove_conffile_rollback "$_oldconffile"
+  if [ -f "$newconffile" ]; then
+    rm "$newconffile"
+  fi
+}
+
+run () {
+  # syntax: run command [ argument ... ]
+  #
+  # Run specified command with optional arguments and report its exit status.
+  # Useful for commands whose exit status may be nonzero, but still acceptable,
+  # or commands whose failure is not fatal to us.
+  #
+  # NOTE: Do *not* use this function with db_get or db_metaget commands; in
+  # those cases the return value of the debconf command *must* be checked
+  # before the string returned by debconf is used for anything.
+
+  local retval
+
+  # validate arguments
+  if [ $# -lt 1 ]; then
+    usage_error "run() called with wrong number of arguments; expected at" \
+                "least 1, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  "$@" || retval=$?
+
+  if [ ${retval:-0} -ne 0 ]; then
+    observe "command \"$*\" exited with status $retval"
+  fi
+}
+
+make_symlink_sane () {
+  # syntax: make_symlink_sane symlink target
+  #
+  # Ensure that the symbolic link symlink exists, and points to target.
+  #
+  # If symlink does not exist, create it and point it at target.
+  #
+  # If symlink exists but is not a symbolic link, back it up.
+  #
+  # If symlink exists, is a symbolic link, but points to the wrong location, fix
+  # it.
+  #
+  # If symlink exists, is a symbolic link, and already points to target, do
+  # nothing.
+  #
+  # This function wouldn't be needed if ln had an -I, --idempotent option.
+
+  # Validate arguments.
+  if [ $# -ne 2 ]; then
+    usage_error "make_symlink_sane() called with wrong number of arguments;" \
+      "expected 2, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  # We could just use the positional parameters as-is, but that makes things
+  # harder to follow.
+  local symlink target
+
+  symlink="$1"
+  target="$2"
+
+  if [ -L "$symlink" ] && [ "$(readlink "$symlink")" = "$target" ]; then
+      observe "link from $symlink to $target already exists"
+  else
+    observe "creating symbolic link from $symlink to $target"
+    mkdir -p "${target%/*}" "${symlink%/*}"
+    ln -s -b -S ".dpkg-old" "$target" "$symlink"
+  fi
+}
+
+migrate_dir_to_symlink () {
+  # syntax: migrate_dir_to_symlink old_location new_location
+  #
+  # Per Debian Policy section 6.5.4, "A directory will never be replaced by a
+  # symbolic link to a directory or vice versa; instead, the existing state
+  # (symlink or not) will be left alone and dpkg will follow the symlink if
+  # there is one."
+  #
+  # We have to do it ourselves.
+  #
+  # This function moves the contents of old_location, a directory, into
+  # new_location, a directory, then makes old_location a symbolic link to
+  # new_location.
+  #
+  # old_location need not exist, but if it does, it must be a directory (or a
+  # symlink to a directory).  If it is not, it is backed up.  If new_location
+  # exists already and is not a directory, it is backed up.
+  #
+  # This function should be called from a package's preinst so that other
+  # packages unpacked after this one --- but before this package's postinst runs
+  # --- are unpacked into new_location even if their payloads contain
+  # old_location filespecs.
+
+  # Validate arguments.
+  if [ $# -ne 2 ]; then
+    usage_error "migrate_dir_to_symlink() called with wrong number of"
+                "arguments; expected 2, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  # We could just use the positional parameters as-is, but that makes things
+  # harder to follow.
+  local new old
+
+  old="$1"
+  new="$2"
+
+  # Is old location a symlink?
+  if [ -L "$old" ]; then
+    # Does it already point to new location?
+    if [ "$(readlink "$old")" = "$new" ]; then
+      # Nothing to do; migration has already been done.
+      observe "migration of $old to $new already done"
+      return 0
+    else
+      # Back it up.
+      warn "backing up symbolic link $old as $old.dpkg-old"
+      mv -b "$old" "$old.dpkg-old"
+    fi
+  fi
+
+  # Does old location exist, but is not a directory?
+  if [ -e "$old" ] && ! [ -d "$old" ]; then
+      # Back it up.
+      warn "backing up non-directory $old as $old.dpkg-old"
+      mv -b "$old" "$old.dpkg-old"
+  fi
+
+  observe "migrating $old to $new"
+
+  # Is new location a symlink?
+  if [ -L "$new" ]; then
+    # Does it point the wrong way, i.e., back to where we're migrating from?
+    if [ "$(readlink "$new")" = "$old" ]; then
+      # Get rid of it.
+      observe "removing symbolic link $new which points to $old"
+      rm "$new"
+    else
+      # Back it up.
+      warn "backing up symbolic link $new as $new.dpkg-old"
+      mv -b "$new" "$new.dpkg-old"
+    fi
+  fi
+
+  # Does new location exist, but is not a directory?
+  if [ -e "$new" ] && ! [ -d "$new" ]; then
+    warn "backing up non-directory $new as $new.dpkg-old"
+    mv -b "$new" "$new.dpkg-old"
+  fi
+
+  # Create new directory if it does not yet exist.
+  if ! [ -e "$new" ]; then
+    observe "creating $new"
+    mkdir -p "$new"
+  fi
+
+  # Copy files in old location to new location.  Back up any filenames that
+  # already exist in the new location with the extension ".dpkg-old".
+  observe "copying files from $old to $new"
+  if ! (cd "$old" && cp -a -b -S ".dpkg-old" . "$new"); then
+    die "error(s) encountered while copying files from $old to $new"
+  fi
+
+  # Remove files at old location.
+  observe "removing $old"
+  rm -r "$old"
+
+  # Create symlink from old location to new location.
+  make_symlink_sane "$old" "$new"
+}
+
+# vim:set ai et sw=2 ts=2 tw=80:
+
+# GOBSTOPPER: The X Strike Force shell library ends here.
--- libxaw-1.0.7.orig/debian/xsfbs/repack.sh
+++ libxaw-1.0.7/debian/xsfbs/repack.sh
@@ -0,0 +1,32 @@
+#!/bin/sh
+
+set -e
+
+if ! [ -d debian/prune ]; then
+	exit 0
+fi
+
+if [ "x$1" != x--upstream-version ]; then
+	exit 1
+fi
+
+version="$2"
+filename="$3"
+
+if [ -z "$version" ] || ! [ -f "$filename" ]; then
+	exit 1
+fi
+
+dir="$(pwd)"
+tempdir="$(mktemp -d)"
+
+cd "$tempdir"
+tar xf "$dir/$filename"
+cat "$dir"/debian/prune/* | while read file; do rm -f */$file; done
+
+tar czf "$dir/$filename" *
+cd "$dir"
+rm -rf "$tempdir"
+echo "Done pruning upstream tarball"
+
+exit 0