--- lprng-3.8.A.orig/debian/README.source
+++ lprng-3.8.A/debian/README.source
@@ -0,0 +1,8 @@
+This package uses dpatch to manage all modifications to the upstream
+source. Changes are stored in the source package as diffs in
+debian/patches and applied during the build. Please see:
+
+ /usr/share/doc/dpatch/README.source
+
+for more information on how to apply the patches, modify patches, or
+remove a patch.
--- lprng-3.8.A.orig/debian/config
+++ lprng-3.8.A/debian/config
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+set -e
+
+# source debconf library.
+. /usr/share/debconf/confmodule
+
+# lpq, lprm lpr setuid?
+db_input low lprng/setuid_tools || true
+db_go
+
+# Check for default file, if it is there then set the debconf value
+default_start_lpd="true"
+if [ -f /etc/default/lprng ]; then
+ grep -q 'START_LPD=yes' /etc/default/lprng || default_start_lpd="false"
+ db_set lprng/start_lpd $default_start_lpd
+fi
+db_input medium lprng/start_lpd || true
+db_go
+
+
--- lprng-3.8.A.orig/debian/cron.daily
+++ lprng-3.8.A/debian/cron.daily
@@ -0,0 +1,52 @@
+#!/bin/sh
+#
+# source:
+# $Source: /var/cvs/hosts/quoininc/smoke/etc/cron.daily/lprng,v $
+#
+# revision:
+# @(#) $Id: lprng,v 1.1 1998/01/11 02:19:10 jplejacq Exp $
+#
+# copyright:
+# Copyright (C) 1997 Jean Pierre LeJacq <jplejacq@quoininc.com>
+#
+# description:
+# Host configuration of cron daily program for lprng.
+#
+# Reports warnings or errors using the syslog facility. If there
+# are no errors, removes junk files older than a day.
+
+test -x /usr/sbin/checkpc || exit 0
+test -e /etc/printcap || exit 0
+
+# filter defining what errors to look for:
+CS_WARN="Warning"
+CS_ERROR="lp\: Need to fix"
+
+CS_DENY="${CS_WARN}|${CS_ERROR}"
+
+
+# filter defining which errors you'll accept:
+CS_LOCK_OWN="Warning - owner/group of ./var/lock. are 0/0, not 7/7"
+CS_LOCK_PERM="Warning - permissions of ./var/lock. are 041777, not 042700"
+CS_MISS_LOCKFILE="Warning - LPD Lockfile .* does not exist!"
+
+CS_ALLOW="${CS_LOCK_OWN}|${CS_LOCK_PERM}|$CS_MISS_LOCKFILE"
+
+
+# main:
+
+ if [ -x /usr/sbin/checkpc ]
+ then
+
+ /usr/sbin/checkpc | grep -E "${CS_DENY}" | grep -q -v -E "${CS_ALLOW}" ; RV=$?
+ if [ "$RV" = "0" ]
+ then
+ /usr/bin/logger -p "lpr.err" -t "lpd" "cron.daily found errors, run checkpc for details."
+ else
+ /usr/sbin/checkpc -r -A 1D
+ fi
+ fi
+
+exit 0
+
+
--- lprng-3.8.A.orig/debian/templates
+++ lprng-3.8.A/debian/templates
@@ -0,0 +1,34 @@
+Template: lprng/twolpd_conf
+Type: note
+_Description: There are two lpd.conf files
+ You have a lpd.conf in the old location (/etc/lpd.conf) and the new
+ location (/etc/lprng/lpd.conf). From lprng version 3.6.16-1 this file
+ should be only in /etc/lprng, please check both files and remove
+ /etc/lpd.conf
+
+Template: lprng/twolpd_perms
+Type: note
+_Description: There are two lpd.perms files
+ You have a lpd.perms in the old location (/etc/lpd.perms) and the new
+ location (/etc/lprng/lpd.perms). Since lprng version 3.6.16-1 this file
+ should be only in /etc/lprng, please check both files and remove
+ /etc/lpd.perms
+
+Template: lprng/setuid_tools
+Type: boolean
+Default: false
+_Description: Make lpr, lprm and lpq setuid root?
+ For full RFC1179 compliance you need to make these programs setuid root.
+ This is mainly so they can create a socket with a low port number. The low
+ port number may be important if you have network printers or have adjusted
+ /etc/lprng/lpd.perms to restrict access to non-privledged ports. For the
+ typical printer connected locally to parallel port (and many other)
+ scenario you can leave these programs non setuid root.
+
+Template: lprng/start_lpd
+Type: boolean
+Default: true
+_Description: Start lpd (Printer Daemon) at boot?
+ Some people for various reasons do not want to start lpd. Refusing this
+ option means lpd will not start. Unless you know why you want lpd
+ not to start, just accept the default.
--- lprng-3.8.A.orig/debian/dirs
+++ lprng-3.8.A/debian/dirs
@@ -0,0 +1,3 @@
+usr/bin
+usr/sbin
+etc/lprng
--- lprng-3.8.A.orig/debian/examples
+++ lprng-3.8.A/debian/examples
@@ -0,0 +1 @@
+conf/printcap
--- lprng-3.8.A.orig/debian/control
+++ lprng-3.8.A/debian/control
@@ -0,0 +1,20 @@
+Source: lprng
+Section: net
+Priority: extra
+Maintainer: Craig Small <csmall@debian.org>
+Build-Depends: debhelper (>= 7.0.50~), mawk | gawk, procps, libwrap0-dev, libkrb5-dev, debconf | debconf-2.0, libssl-dev, po-debconf, quilt (>= 0.40), openssl
+Standards-Version: 3.8.3
+Homepage: http://lprng.sourceforge.net/
+
+Package: lprng
+Architecture: any
+Pre-Depends: debconf | debconf-2.0
+Depends: lsb-base (>= 2.0), ${shlibs:Depends}, ${misc:Depends}
+Provides: lpr
+Suggests: magicfilter, lprng-doc
+Conflicts: lpr, apsfilter (<<4.9.1-10), suidmanager (<< 0.50), cupsys-bsd
+Replaces: lpr
+Description: lpr/lpd printer spooling system
+ The LPRng software is an enhanced, extended, and portable version
+ of the Berkeley LPR software (the standards UNIX printer spooler)
+ You can use this for local and remote printers.
--- lprng-3.8.A.orig/debian/mime
+++ lprng-3.8.A/debian/mime
@@ -0,0 +1 @@
+*/*; false; print=lpr %s; priority=0
--- lprng-3.8.A.orig/debian/printcap
+++ lprng-3.8.A/debian/printcap
@@ -0,0 +1,23 @@
+# /etc/printcap: printer capability database. See printcap(5).
+# You can use the filter entries df, tf, cf, gf etc. for
+# your own filters. See the printcap(5) manual page for further
+# details.
+
+lp|Generic dot-matrix printer entry
+ :lp=/dev/lp1
+ :sd=/var/spool/lpd/lp
+ :af=/var/log/lp-acct
+ :lf=/var/log/lp-errs
+ :pl#66
+ :pw#80
+ :pc#150
+ :mx#0
+ :sh
+
+# rlp|Remote printer entry
+# :lp=
+# :rm=remotehost
+# :rp=remoteprinter
+# :sd=/var/spool/lpd/remote
+# :mx#0
+# :sh
--- lprng-3.8.A.orig/debian/README.Debian
+++ lprng-3.8.A/debian/README.Debian
@@ -0,0 +1,103 @@
+ README for Debian package of LPRng
+ ==================================
+
+This is a collection of things that you should read, especially if you are
+having troubles with LPRng or your printers. Please also note there is
+a LPRng-HOWTO in the lprng-doc package. If you are having one of these
+problems listed below and report a bug about it, make sure you have read
+this README and you say in your bug report you have done so.
+
+GTK Applications Not Printing to LPRng
+--------------------------------------
+
+Programs based on the gtk library (which includes a lot of popular
+programs in Debian) have lost the ability to print to lpr/lprng just
+before the release of Debian 5.0.
+
+A workaround to this problem of gtk+2.0 can be:
+
+ * for a one-user setup, include an entry in the file .gtkrc-2.0 in
+ your home directory with the line:
+
+ gtk-print-backends = "file,lpr"
+
+ * for a system-wide setup, include the same line in the file
+ /etc/gtk-2.0/gtkrc
+
+Network Printer not Printing
+----------------------------
+#1 source of all my bug reports would have to be this. Someone has a
+networked printer (that is a printer with its own IP address), they've upgraded
+from some old LPRng, say 3.6.12 or lower, and now the printer stops working
+and the jobs just disappear.
+
+You probably have something in your /etc/printcap like lp=/dev/null as
+well as some rp and rm lines. Well, the job is going to the lp line and
+ending up in /dev/null, remove that line out of printcap.
+
+Or you might have a lpr_bounce clause in there which should be removed.
+
+Not printing under high load?
+-----------------------------
+#2 source of bugs, maybe going to #1 soon is the bugs surrounding done_jobs.
+In short if you run versions around 3.8.10 you have old jobs hanging
+around your spool, if you run 3.8.15 then you'll lose jobs.
+I have now put a temporary fix (done_jobs=0) by default. If you do not
+let dpkg upgrade your lpd.conf file then unless you like weirdo bugs put a
+line in /etc/lprng/lpd.conf like this:
+done_jobs=0
+
+Remote Users not being able to print
+------------------------------------
+LPRng version 3.6.A locked down the daemon even more than previous versions.
+By default the Debian package doesn't listen on the TCP port.
+
+To enable remote connections to the LPRng lpd daemon, add the following
+line to /etc/lprng/lpd.conf:
+ lpd_listen_port=515
+
+Remote Printers and no spool file
+---------------------------------
+Some people want to directly print to their remote printers without having all
+the spooling etc on the Linux box. Some old versions allowed this to happen
+out of the box. The newer LPRngs do not because it is generall a bad idea.
+But if you want to do it, put something like this in your /etc/printcap
+ lp1:rp=pr:rm=10.0.1.2
+ :force_localhost@
+Also read the LPRng-HOWTO for more information.
+
+Why is GDBM disabled in configure?
+----------------------------------
+In 3.7.3 gdbm was introduced. Unfortunately it uses some definitions that I
+could not find (certainly, they won't in gdbm.h), so it was disabled.
+
+lpd does not start or you get connection refused messages
+---------------------------------------------------------
+From version 3.8.2 there are two new reasons why LPRng's lpd server will not
+start. The first is that the /etc/printcap file is not installed by default
+as it is shared amongst many packages and the lprng package should not claim
+ownership over it. Look in /usr/share/doc/lprng/examples for an example
+printcap. Secondly there is a debconf question which asks if you want lpd
+to be started, most people should say yes.
+
+Using lprng in a chroot
+-----------------------
+If you use lprng inside a chroot you will be unable to print if you
+try to use localhost. This is because lprng is too clever and when
+it sees localhost it uses a unix socket (which may not exist in the
+chroot).
+
+The solution is to either mount /var/run into the chroot or alternatively
+add the following line to the lpd.conf file inside the chroot:
+unix_socket_path=off
+
+This will force lprng client inside the chroot to actually use a TCP socket
+and not the (non-existent) unix socket.
+
+Daily check
+-----------
+Since 3.8.A-1 the daily check will silently exit if there is no /etc/printcap
+file. This means if you have to have lprng installed for lsb reasons but
+don't have printers, just make sure there is no /etc/printcap
+
+ -- Rogério Brito <rbrito@cruz>, Wed, 20 May 2009 12:28:37 -0300
--- lprng-3.8.A.orig/debian/rules.old
+++ lprng-3.8.A/debian/rules.old
@@ -0,0 +1,115 @@
+#!/usr/bin/make -f
+# Sample debian/rules that uses debhelper.
+# This file is public domain software, originally written by Joey Hess.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+# For dpatch
+PACKAGE=lprng
+include /usr/share/dpatch/dpatch.make
+
+# For autotools
+export DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+export DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+
+ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE))
+ confflags += --build $(DEB_HOST_GNU_TYPE)
+else
+ confflags += --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE)
+endif
+
+build: build-stamp
+build-stamp: patch-stamp
+ dh_testdir
+
+ # Required to stop timestamp skew
+ touch configure.in && touch aclocal.m4 && touch configure
+
+ ./configure $(confflags) \
+ --prefix=/ --exec-prefix=/usr \
+ --disable-rpath \
+ --with-config_subdir=lprng \
+ --with-lockfile=/var/run/lprng/lpd \
+ --libexecdir=\$${exec_prefix}/lib/lprng --mandir=\$${exec_prefix}/share/man \
+ --with-localedir=\$${exec_prefix}/share/locale \
+ --with-unix_socket_path=/var/run/lprng/socket \
+ --enable-kerberos_checks --enable-kerberos \
+ --with-groupid=lp \
+ --disable-remote \
+ --enable-lpd.conf.local
+# --with-user-objs="-lssl -lkrb5"
+# --disable-gdbm \
+
+ $(MAKE)
+ touch build-stamp
+
+clean: unpatch
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp
+
+ # Add here commands to clean up after the build process.
+ [ ! -f Makefile ] || $(MAKE) distclean
+ -test -r /usr/share/misc/config.sub && \
+ cp -f /usr/share/misc/config.sub config.sub
+ -test -r /usr/share/misc/config.guess && \
+ cp -f /usr/share/misc/config.guess config.guess
+ debconf-updatepo
+ dh_clean
+
+install:
+install: build
+ dh_testdir
+ dh_testroot
+ dh_prep
+ dh_installdirs
+
+ # Add here commands to install the package into debian/lprng.
+ #$(MAKE) prefix=`pwd`/debian/tmp/usr install
+ $(MAKE) install POSTINSTALL=NO DESTDIR=$(CURDIR)/debian/lprng SAMPLESUFFIX=""
+ #install -m 644 debian/printcap $(CURDIR)/debian/lprng/etc/
+ install -m 644 conf/lpd.perms $(CURDIR)/debian/lprng/etc/lprng
+ install -m 644 debian/lpd.conf-debian $(CURDIR)/debian/lprng/etc/lprng/lpd.conf
+ chmod 644 $(CURDIR)/debian/lprng/etc/lprng/lpd.conf
+ # Remove sample printcap
+ rm $(CURDIR)/debian/lprng/etc/printcap
+
+# Build architecture-independent files here.
+binary-indep: build install
+# We have nothing to do by default
+
+# Build architecture-dependent files here.
+binary-arch: build install
+ dh_testdir -a
+ dh_testroot -a
+ dh_installdebconf -a
+ dh_installdocs -a
+ dh_installexamples -a
+ dh_installmenu -a
+# dh_installlogrotate -a
+# dh_installemacsen -a
+# dh_installpam -a
+# dh_installmime -a
+ dh_installifupdown -a
+ dh_installinit -a -n
+ dh_installcron -a
+# dh_installmanpages -a
+ dh_installinfo -a
+# dh_undocumented -a
+ dh_installchangelogs -a ChangeLog
+ dh_strip -a
+ dh_link -a
+ dh_compress -a
+ dh_fixperms -a
+ # You may want to make some executables suid here.
+ dh_makeshlibs -a
+ dh_installdeb -a
+# dh_perl -a
+ dh_shlibdeps -a
+ dh_gencontrol -a
+ dh_md5sums -a
+ dh_builddeb -a
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install
--- lprng-3.8.A.orig/debian/watch
+++ lprng-3.8.A/debian/watch
@@ -0,0 +1,6 @@
+# watch file for LPRng
+#
+version=2
+
+ftp://ftp.lprng.com/pub/LPRng/LPRng/LPRng-(.*)\.tgz \
+ debian uupdate
--- lprng-3.8.A.orig/debian/postinst
+++ lprng-3.8.A/debian/postinst
@@ -0,0 +1,98 @@
+#! /bin/sh
+# postinst script for lprng
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# Source the debconf library.
+. /usr/share/debconf/confmodule
+
+update_defaults()
+{
+ db_get lprng/start_lpd
+ if [ "$RET" = "true" ]; then
+ START_LPD="yes"
+ else
+ START_LPD="no"
+ fi
+ cat > /etc/default/lprng <<EOF
+#Start the LPRng daemon lpd? Yes or No
+START_LPD=$START_LPD
+EOF
+
+}
+
+## dsetperms - sets owner, group, and permissions to specified value,
+## but only if no dpkg-statoverride entry exists.
+## usage: dsetperms user group mode file
+
+dsetperms()
+{
+ if [ "$#" != 4 ] ; then
+ echo 1>&2 "dsetperms: Requires four arguments"
+ return 1
+ fi
+ if ! dpkg-statoverride --list "$4" > /dev/null 2>&1 ; then
+ chown "$1":"$2" "$4" || return 1
+ chmod "$3" "$4" || return 1
+ else
+ return 0
+ fi
+}
+
+case "$1" in
+ install|upgrade)
+ ;;
+
+ configure)
+ # Create directories for pid file
+ install -d -m 0775 -o root -g lp /var/run/lprng
+ # Check result of tools being setuid
+ db_get lprng/setuid_tools
+ if [ "$RET" = "true" ]; then
+ dsetperms root root 4755 /usr/bin/lpr
+ dsetperms root root 4755 /usr/bin/lprm
+ dsetperms root root 4755 /usr/bin/lpq
+ else
+ dsetperms root root 0755 /usr/bin/lpr
+ dsetperms root root 0755 /usr/bin/lprm
+ dsetperms root root 0755 /usr/bin/lpq
+ fi
+ # Only make the symlink if nothing is there already Bug: #147641
+ # Check for both a real file and a dangling symlink #544986
+ if [ ! -e /etc/lprng/printcap ] && [ ! -L /etc/lprng/printcap ] ; then
+ (cd /etc/lprng ; ln -s ../printcap . )
+ fi
+ # Remove sample files form /etc/lprng shouldnever been there
+ [ -e /etc/lprng/lpd.perms.sample ] && rm /etc/lprng/lpd.perms.sample
+ [ -e /etc/lprng/lpd.conf.sample ] && rm /etc/lprng/lpd.conf.sample
+ update_defaults
+ ;;
+ abort-upgrade)
+ ;;
+ *)
+ echo "postinst called with unknown argument \`$1'" >&2
+ exit 0
+ ;;
+esac
+
+# Those using dependency based boot sequencing with sysv-rc and installing
+# lprng before version 3.8.A-2.2 would miss the runlevel 4 symlink.
+# Recover from this.
+if [ "$1" = "configure" ] && dpkg --compare-versions "$2" le "3.8.A-2.2" \
+ && [ -f /etc/rc2.d/[SK][0-9][0-9]lprng ] && [ -f /etc/rc4.d/K[0-9][0-9]lprng ]
+then
+ update-rc.d -f lprng remove
+fi
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+# Urgh, LPPng's lpd seems to be not closing all the file descriptors
+# which makes debconf hang, tell debconf to go away
+db_stop
+
+# vim:et:sw=4:ts=4:
--- lprng-3.8.A.orig/debian/copyright
+++ lprng-3.8.A/debian/copyright
@@ -0,0 +1,73 @@
+This is Debian GNU/Linux's prepackaged version of LPRng - an Enhanced
+Printer Spooler. This package was put together by
+Craig Small <csmall@debian.org> from sources obtained from
+http://lprng.sourceforge.net/
+
+Upstream Author:
+
+ Patrick Powell <papowell@sdsu.edu>
+
+Copyright:
+
+ Copyright (c) 1986-2001 Patrick Powell
+
+License:
+
+ *LPRng and IFHP LICENSE*
+ GNU GPL and Artistic License
+
+ (Version 4, Jan 24, 2000)
+
+ Copyright Patrick Powell, Astart Technologies
+ <papowell@lprng.com>
+
+ All rights reserved.
+
+You may use "LPRng" or "IFHP" under either the terms of the GNU
+GPL License or the Artistic License. These licenses are included
+below.
+
+ These Licenses apply to the computer software packages known as
+"LPRng", "IFHP", and associated files. The "Package" or "Program"
+below refers to the programs, files, and associated software which
+are distributed as the package.
+
+ The "LPRng" Software Package is a copyrighted work whose copyright
+is held by Patrick Powell.
+
+ The "IFHP" Software Package is a copyrighted work whose copyright
+is held by Patrick Powell.
+
+ BY MODIFYING OR DISTRIBUTING THE PROGRAM (OR ANY WORK BASED ON THE
+PROGRAM), YOU INDICATE YOUR ACCEPTANCE OF THIS LICENSE TO DO SO, AND ALL
+ITS TERMS AND CONDITIONS FOR COPYING, DISTRIBUTING OR MODIFYING THE
+PROGRAM OR WORKS BASED ON IT. NOTHING OTHER THAN THIS LICENSE GRANTS
+YOU PERMISSION TO MODIFY OR DISTRIBUTE THE PROGRAM OR ITS DERIVATIVE
+WORKS. THESE ACTIONS ARE PROHIBITED BY LAW. IF YOU DO NOT ACCEPT THESE
+TERMS AND CONDITIONS, DO NOT MODIFY OR DISTRIBUTE THE PROGRAM.
+
+src/common/md5.c contains code which states:
+ * This code implements the MD5 message-digest algorithm.
+ * The algorithm is due to Ron Rivest. This code was
+ * written by Colin Plumb in 1993, no copyright is claimed.
+ * This code is in the public domain; do with it what you wish.
+
+-----------------------------------------------------------------------
+ Addendum Fri Jun 21 17:06:33 PDT 2002
+
+If you wish to distribute the LPRng source code or binaries of any
+of the programs in the LPRng packages under terms of the GNU license,
+then when any package or portion of the LPRng is configured to use
+any facility or utility of the OpenSSL distribution, the additional
+following clause will be applied, as recommended in the OpenSSL
+0.9.6c release FAQ:
+
+"This program is released under the GPL with the additional exemption that
+compiling, linking, and/or using OpenSSL is allowed."
+
+-----------------------------------------------------------------------
+
+On Debian GNU/Linux systems you will find the Artistic License at
+/usr/share/common-licenses/Artistic and the GNU GPL version 2 at
+/usr/share/common-licenses/GPL-2
+
--- lprng-3.8.A.orig/debian/preinst
+++ lprng-3.8.A/debian/preinst
@@ -0,0 +1,61 @@
+#! /bin/sh
+# preinst script for LPRng
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+# * <new-preinst> `install'
+# * <new-preinst> `install' <old-version>
+# * <new-preinst> `upgrade' <old-version>
+# * <old-preinst> `abort-upgrade' <new-version>
+
+# Source the debconf library.
+. /usr/share/debconf/confmodule
+
+check_configfile_locations() {
+ # Check to see if we have both old *AND* new config files Bug #66570
+ if [ -f /etc/lprng/lpd.conf ] && [ -f /etc/lpd.conf ]; then
+ db_input high lprng/twolpd_conf
+ fi
+ if [ -f /etc/lprng/lpd.perms ] && [ -f /etc/lpd.perms ]; then
+ db_input high lprng/twolpd_perms
+ fi
+ # Check to see if new config directory is here
+ if [ \! -d /etc/lprng ] ; then
+ mkdir -p /etc/lprng
+ if [ \! -f /etc/lprng/lpd.conf ] && [ -f /etc/lpd.conf ]; then
+ cp /etc/lpd.conf /etc/lprng/lpd.conf
+ rm -f /etc/lpd.conf
+ fi
+ if [ \! -f /etc/lprng/lpd.perms ] && [ -f /etc/lpd.perms ]; then
+ cp /etc/lpd.perms /etc/lprng/lpd.perms
+ rm -f /etc/lpd.perms
+ fi
+ fi
+ db_stop
+
+}
+
+# We only need to worry about old configuration files if the old
+# version (either installed or just config files is older than
+if dpkg --compare-versions "$2" lt 3.6.16-1; then
+ check_configfile_locations
+fi
+
+case "$1" in
+ install|upgrade|abort-upgrade)
+ ;;
+
+ *)
+ echo "preinst called with unknown argument \`$1'" >&2
+ exit 0
+ ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
--- lprng-3.8.A.orig/debian/init.d
+++ lprng-3.8.A/debian/init.d
@@ -0,0 +1,137 @@
+#! /bin/sh -e
+### BEGIN INIT INFO
+# Provides: lprng
+# Required-Start: $network $remote_fs $syslog
+# Required-Stop: $network
+# Default-Start: 2 3 4 5
+# Default-Stop: 0 1 6
+# Short-Description: Start lpd to allow printing
+# Description: lpd is the print daemon required for lpr to work properly.
+# It is basically a server that arbitrates print jobs to printer(s).
+### END INIT INFO
+# Return values acc. to LSB for all commands but status:
+# 0 - success
+# 1 - misc error
+# 2 - invalid or excess args
+# 3 - unimplemented feature (e.g. reload)
+# 4 - insufficient privilege
+# 5 - program not installed
+# 6 - program not configured
+#
+# Note that starting an already running service, stopping
+# or restarting a not-running service as well as the restart
+# with force-reload (in case signalling is not supported) are
+# considered a success.
+
+
+# Source gLSB script
+. /lib/lsb/init-functions
+
+# replace with the place you configured:
+DAEMON=/usr/sbin/lpd
+CONFIGDIR=/etc/lprng
+PRINTCAP=/etc/printcap
+LPDPRINTCAP=/etc/lprng/printcap
+DESC="LPRng printer spooler"
+
+# Check for printcap file, if there isn't one, there is no need to start
+test -f $PRINTCAP || test -f $LPDPRINTCAP || exit 0
+
+# Do not start if there is no lpd or the lib dir is not there
+test -f $DAEMON || test -d /usr/lib/lprng || exit 5
+
+# Work out what port we are running on
+LPD_PORT=$(sed '/^[[:space:]]*lpd_port/!d; s/.*[=#]\(.*\)/\1/; q' $CONFIGDIR/lpd.conf)
+if [ -z $LPD_PORT ]
+then
+ LPD_PORT=515
+fi
+
+# Check lpd.conf for lockfile
+LOCKFILE=$(sed '/^[[:space:]]*lockfile/!d; s/.*[=#]\(.*\)/\1/; q' $CONFIGDIR/lpd.conf)
+if [ -z $LOCKFILE ]
+then
+ LOCKFILE=/var/run/lprng/lpd
+fi
+
+PIDFILE=$LOCKFILE.$LPD_PORT
+
+if [ -r /etc/default/lprng ]; then
+ . /etc/default/lprng
+fi
+
+initialise()
+{
+# Description
+# Runs checkpc and also checks we have the run directory
+ RUNDIR=$(dirname ${PIDFILE})
+ [ ! -d ${RUNDIR} ] && mkdir -p ${RUNDIR}
+ checkpc -f > /dev/null || true
+}
+
+cleanup()
+# description:
+# Removes all lock and control files on this host.
+{
+ rm -f "${PIDFILE}"
+
+ for dir in $(find /var/spool/lpd/* -type d -print)
+ do
+ rm -f ${dir}/lock.pr
+ rm -f ${dir}/control.pr
+ rm -f ${dir}/unspooler.pr
+ done
+}
+
+case "$1" in
+ start)
+ if [ "$START_LPD" != "yes" ]; then
+ log_warning_msg "Not starting LPRng - edit /etc/default/lprng and change START_LPD to be yes."
+ exit 0
+ fi
+ log_daemon_msg "Starting $DESC" lpd
+ initialise
+ if start-stop-daemon --start --quiet --pidfile "${PIDFILE}" \
+ --exec $DAEMON ; then
+ log_end_msg 0
+ else
+ log_end_msg 1
+ exit 1
+ fi
+ ;;
+ stop)
+ log_daemon_msg "Stopping $DESC" lpd
+ if start-stop-daemon --stop --oknodo --quiet --pidfile "${PIDFILE}" ; then
+ cleanup
+ log_end_msg 0
+ else
+ log_end_msg 1
+ exit 1
+ fi
+ ;;
+ reload)
+ log_daemon_msg "Reloading $DESC configuration files..."
+ if start-stop-daemon --stop --signal 1 --quiet --pidfile \
+ "${PIDFILE}" --oknodo ; then
+ log_end_msg 0
+ else
+ log_end_msg 1
+ exit 1
+ fi
+ ;;
+ restart|force-reload)
+ log_daemon_msg "Restarting $DESC" lpd
+ start-stop-daemon --stop --quiet --pidfile "${PIDFILE}"
+ sleep 1
+ initialise
+ start-stop-daemon --start --quiet --pidfile "${PIDFILE}" \
+ --exec $DAEMON
+ log_end_msg 0
+ ;;
+ *)
+ echo "Usage: /etc/init.d/lprng {start|stop|restart|force-reload}" >&2
+ exit 1
+ ;;
+esac
+
+exit 0
--- lprng-3.8.A.orig/debian/lprng.if-up
+++ lprng-3.8.A/debian/lprng.if-up
@@ -0,0 +1,31 @@
+#!/bin/sh
+
+# Configuration directory
+CONFIGDIR=/etc/lprng
+
+# Bail if the interface is the loopback
+[ "$IFACE" != "lo" ] || exit 0
+
+# Bail if not using resolvconf
+[ -x /sbin/resolvconf ] && exit 0
+
+# Bail if the daemon doesn't exist or lib dir is gone
+[ -x /usr/sbin/lpd ] || [ -d /usr/lib/lprng ] || exit 0
+
+# Work out the pid file
+LPD_PORT=$(grep "^[[:space:]]*lpd_port" $CONFIGDIR/lpd.conf | cut -d "=" -f 2)
+if [ -z $LPD_PORT ]
+then
+ LPD_PORT=515
+fi
+LOCKFILE=$(grep "^[[:space:]]*lockfile" $CONFIGDIR/lpd.conf | cut -d "=" -f 2)
+if [ -z $LOCKFILE ]
+then
+ LOCKFILE=/var/run/lprng/lpd
+fi
+PIDFILE=$LOCKFILE.$LPD_PORT
+
+# Bail if not pidfile
+[ -f $PIDFILE ] || exit 0
+
+/usr/sbin/invoke-rc.d lprng restart
--- lprng-3.8.A.orig/debian/changelog
+++ lprng-3.8.A/debian/changelog
@@ -0,0 +1,885 @@
+lprng (3.8.A-3) unstable; urgency=low
+
+ * Corrected patch for kfreebsd Closes: #537857
+ * postinst checks for symlink on printcap Closes: #544986
+ * Documented lpd_listen_port in lpd.conf man page Closes: #492684
+ * Maintainer upload Closes: #544991
+ * Changed rules file for new debhelper
+ * Changed from dpatch to quilt for patching
+ * Fixed symlinks for 2 filter man pages
+
+ -- Craig Small <csmall@debian.org> Tue, 22 Sep 2009 15:34:35 +1000
+
+lprng (3.8.A-2.2) unstable; urgency=low
+
+ * Non-maintainer upload.
+ * Corrected runlevel settings in init.d script header, and add postinst
+ code to recover installations affected by this bug (Closes:
+ #541233).
+ * Fixed build problem on kfreebsd (Closes: #537857). Patch from
+ Petr Salinger.
+ * Updated debconf translations for Brazilian Portuguese from
+ Eder L. Marques (Closes: 511890).
+ * Updated debconf translation for Czech from Jan Outrata (Closes: #534967)
+
+ -- Petter Reinholdtsen <pere@debian.org> Fri, 4 Sep 2009 10:24:59 +0200
+
+lprng (3.8.A-2.1) unstable; urgency=low
+
+ * Non-maintainer upload.
+ * The ''fix other packages breaking us'' release:
+ + work around bug 489765 (and similars) by documenting
+ it in the news file.
+ * debian/control:
+ + include misc-depends on the package, as we use debhelper.
+ + upgrade standards version to 3.8.1 (no changes needed).
+ * debian/config:
+ + include set -e in the config script.
+ * debian/README:
+ + include information regarding printing with GTK 2.
+
+ -- Rogério Brito <rbrito@ime.usp.br> Wed, 20 May 2009 12:28:46 -0300
+
+lprng (3.8.A-2) unstable; urgency=low
+
+ * Added debconf translations:
+ - Finnish. Closes: #496233
+ - Vietnamese Closes: #500026
+ * Removed old ja.po download file
+ * Updated standards version
+
+ -- Craig Small <csmall@debian.org> Mon, 13 Oct 2008 08:27:50 +1100
+
+lprng (3.8.A-1.1) unstable; urgency=low
+
+ * Non-maintainer upload to fix pending l10n issues.
+ * Use "$syslog" in Required-Start for LSB headers in the init
+ script. Avoids failures when the syslog daemon is not
+ syslog. Closes: #495696
+ * Debconf translations:
+ - Galician. Closes: #484142
+ - Japanese. Closes: #491041
+ - Swedish. Closes: #492098
+ - Russian. Closes: #494474
+
+ -- Christian Perrier <bubulle@debian.org> Fri, 22 Aug 2008 07:16:16 +0200
+
+lprng (3.8.A-1) unstable; urgency=low
+
+ * New upstream release
+ * Moved debconf include in preinst Closes: #474813
+ * if-up script uses correct path for invole-rc.d Closes: #463578
+ * init.d file uses sed instead of grep and cut Closes: #474295
+
+ -- Craig Small <csmall@debian.org> Wed, 07 May 2008 18:47:20 +1000
+
+lprng (3.8.A~rc4-3) unstable; urgency=low
+
+ * Put initialise back in and created function to create run directory
+
+ -- Craig Small <csmall@debian.org> Mon, 31 Mar 2008 10:09:15 +1100
+
+lprng (3.8.A~rc4-2) unstable; urgency=low
+
+ * Removed initialise from init.d script in restart step
+ * Control now has a homepage, finally.
+
+ -- Craig Small <csmall@debian.org> Mon, 31 Mar 2008 08:48:04 +1100
+
+lprng (3.8.A~rc4-1) unstable; urgency=low
+
+ * New upstream release
+ * Note added that the logfile needs to be created Closes: #458003
+ * Kerberos patch reverted so krb5 works again Closes: #462741
+ * Removed mention of spooldir in postinst Closes: #462605
+ * Note about no remote connecitons Closes: #466964
+ * Sample configu files don't have a suffix Closes: #467030
+ * Updated to debhelper 6 Closes: #467031
+ * Updated to standards version 3.7.4
+ * Updated Japanese debian/po file Closes: #463249
+ * Build-depends on openssl Closes: #469459
+ * Removed sample files introduced in rc2
+
+ -- Craig Small <csmall@debian.org> Wed, 19 Mar 2008 08:43:09 +1100
+
+lprng (3.8.A~rc2-1) unstable; urgency=low
+
+ * New upstream release
+ * Depends on libwrap0-dev not libwrap-dev Closes: #436315
+ * init.d cleans correct lockfiles Closes: #418169
+ * Daily cron check will exit if no /etc/printcap Closes: #457451, #318391
+ * ifup.d script restarts lprng Closes: #144399
+ * Added Spanish po-debconf translation Closes: #415283
+ * Added Portuguese po-debconf translation Closes: #413776
+ * Spool directory not shipped/deleted (checkpc makes it) Closes: #409907
+
+ -- Craig Small <csmall@debian.org> Thu, 24 Jan 2008 21:38:08 +1100
+
+lprng (3.8.28dfsg.1-1) unstable; urgency=low
+
+ * Removed RFC 1179 Closes: 393395
+ * Init script changed to handle RAMRUN option Closes: #390687
+ * Updated Japanese po-debconf file Closes: #392167
+
+ -- Craig Small <csmall@debian.org> Wed, 25 Oct 2006 14:47:02 +1000
+
+lprng (3.8.28-6) unstable; urgency=low
+
+ * init.d returns ok if stop is run but lpd is already dead
+ * Rolling back 10_linelist_closefd patch makes lpd print Closes: #381512
+
+ -- Craig Small <csmall@debian.org> Sun, 6 Aug 2006 07:48:22 +1000
+
+lprng (3.8.28-5) unstable; urgency=low
+
+ * close fds before LDAP sockets Closes: #360788
+ * Check configuration file location only with old prev versions
+ * preinst has POSIX checks Closes: #358628
+ * lp.1 optios->options Closes: #368482
+ * README and lpd.conf.8 mention unix_socket_path Closes: #311774
+ * Updated nl.po Closes: #377249
+ * Standards version 3.7.2
+
+ -- Craig Small <csmall@debian.org> Tue, 18 Jul 2006 11:11:02 +1000
+
+lprng (3.8.28-4) unstable; urgency=low
+
+ * init.d script checks for /usr/lib/lprng Closes: #356054
+ * debhelper v5
+ * Standards version to 3.6.2
+ * Depends on debconf-2.0 too Closes: #332011
+ * Added debconf-updatepo to Clean target Closes: #337268
+ * Updated German po file Closes: #345851
+ * Updated French po file Closes: #337301
+ * Updated Swedish PO file Closes: #338873
+ * Updated Danish PO file Closes: #343441
+ * Updated Italian PO file Closes: #343867
+ * Remove /etc/default/lprng on purge Closes: #327530
+ * Uses lsb init.d
+
+ -- Craig Small <csmall@debian.org> Sun, 12 Mar 2006 11:07:00 +1100
+
+lprng (3.8.28-3.0.1) unstable; urgency=low
+
+ * Binary-only non-maintainer upload for i386; no source changes.
+ * Rebuild with libssl0.9.8
+
+ -- Debian/i386 Build Daemon <buildd_i386-cyberhq> Wed, 12 Oct 2005 00:47:44 -0700
+
+lprng (3.8.28-3) unstable; urgency=low
+
+ * Added Vietnamese translation Closes: #312602
+ * Added Italian translation Closes: #287752
+ * Compilies on gcc4 and AMD Closes: #287521
+ * Since->From in templates Closes: #312603
+
+ -- Craig Small <csmall@debian.org> Fri, 26 Aug 2005 14:17:00 +1000
+
+lprng (3.8.28-2) unstable; urgency=high
+
+ * Fixed insecure lprng_certs directory Closes: #286391
+ Above bug is a security fix
+
+ -- Craig Small <csmall@debian.org> Thu, 23 Dec 2004 14:33:21 +1100
+
+lprng (3.8.28-1) unstable; urgency=low
+
+ * New upstream release
+ * Updated German debconf po Closes: #281134
+ * Updated Dutch debconf po Closes: #277762
+ * Added Czech debconf po Closes: #261791
+ * Check for spool directory in postinst Closes: #218319
+
+ -- Craig Small <csmall@debian.org> Thu, 18 Nov 2004 15:43:33 +1100
+
+lprng (3.8.27-1) unstable; urgency=low
+
+ * New upstream release
+ Upstream fixed busy loop Closes: #245274
+ * Added Japanese po file Closes: #243264
+
+ -- Craig Small <csmall@debian.org> Wed, 26 May 2004 13:45:37 +1000
+
+lprng (3.8.26-1) unstable; urgency=low
+
+ * New upstream version
+ IPP socket disabled Closes: #231587
+ * Now uses dpatch for patch management
+ * Added Dutch debconf translation Closes: #216935
+ * Added Danish debconf translation Closes: #236490
+
+ -- Craig Small <csmall@debian.org> Wed, 24 Mar 2004 10:01:55 +1100
+
+lprng (3.8.25-1) unstable; urgency=low
+
+ * New upstream release
+ * Upgraded to standards version 3.6.1
+ * Upgraded watch file to version 2
+ * Updated pt_BR po file Closes: #219849
+ * Added Dutch debian po files Closes: #219635
+
+ -- Craig Small <csmall@debian.org> Fri, 6 Feb 2004 21:31:18 +1100
+
+lprng (3.8.22-2) unstable; urgency=low
+
+ * Added files line to deb-doc Closes: #210681
+
+ -- Craig Small <csmall@debian.org> Sat, 13 Sep 2003 20:39:12 +1000
+
+lprng (3.8.22-1) unstable; urgency=low
+
+ * New upstream release
+ - Upstream accepted most of the patches, yay
+ * Closes: #205528: chown with ':' not with '.' in postinst
+ * Closes: #189045: checks with dpkg-statoverride before changing spool
+ directory permissions.
+ * Closes: #206342: Updated French debconf templates translation
+ * Closes: #207975: Included updated Brazilian
+ Portuguese (pt_BR) debconf template translations
+
+ -- Craig Small <csmall@debian.org> Fri, 12 Sep 2003 20:22:14 +1000
+
+lprng (3.8.21-3) unstable; urgency=low
+
+ * Fixed gettext brokeness that put stuff in wierd directories
+ Closes: #204530
+
+ -- Craig Small <csmall@debian.org> Fri, 8 Aug 2003 13:17:51 +1000
+
+lprng (3.8.21-2) unstable; urgency=low
+
+ * Updated libtool Closes: #201936, #201624
+ * Patched OF filter problem Closes: #200850
+ * Changed template so that it doesn't use yes and no Closes: #201248
+
+ -- Craig Small <csmall@debian.org> Mon, 21 Jul 2003 07:02:01 +1000
+
+lprng (3.8.21-1) unstable; urgency=low
+
+ * New upstream source
+ * Remove RFC1179 because of license issues Closes: #199812
+ * Removed KRB5_PROTOTYPE Closes: #200588
+ * Put in krb5 deprecated function workaround Closes: #200618
+ * Removed log() function, its not used anywhere Closes: #200621
+ * Fixed the config script so it checks for /etc/default files closes:
+ #135356
+ * Fixed checkpc man page to remove -c flag Closes: #139565
+ * Debconf templates now use po-debconf
+ * Fixed typo in debconf template Closes: #186131
+ * My thanks to Kalle for the Kerberos patches
+ * link liblpr with libkrb5 and libssl Closes: #195992
+
+ -- Craig Small <csmall@debian.org> Thu, 10 Jul 2003 11:21:47 +1000
+
+lprng (3.8.20-4) unstable; urgency=high
+
+ * Removed unsecure create of /tmp/before
+ SECURITY BUG Closes: #188366
+
+ -- Craig Small <csmall@debian.org> Thu, 10 Apr 2003 21:13:56 +1000
+
+lprng (3.8.20-3) unstable; urgency=medium
+
+ * Fixed stupid flag type problem (causes crash on 64-bit): Closes: #183137
+
+ -- Craig Small <csmall@debian.org> Mon, 3 Mar 2003 09:00:58 +1100
+
+lprng (3.8.20-2) unstable; urgency=low
+
+ * Added libssl-dev to Build-Depends
+ * Updated config.* using the rules Closes: #181859
+
+ -- Craig Small <csmall@debian.org> Fri, 21 Feb 2003 21:21:07 +1100
+
+lprng (3.8.20-1) unstable; urgency=low
+
+ * New upstream release
+ - This should hopefully fix all those done_jobs problems
+
+ -- Craig Small <csmall@debian.org> Thu, 13 Feb 2003 21:47:22 +1100
+
+lprng (3.8.15-2) unstable; urgency=low
+
+ * Forced done_jobs to 0, doesnt fix #159632 but at least works by
+ default
+ * Added note in README.Debian about the evils of done_jobs
+ * Added Kerberos 5 support, hope it doesn't break anything Closes: #166558
+ * Ship an empty never changing /etc/lprng/lpd.conf, instead of reqiring
+ users to remerge the change with every new upstream version
+ (Thankyou Andreas) Closes: #147304, #120257
+
+ -- Craig Small <csmall@eye-net.com.au> Sun, 27 Oct 2002 09:24:49 +1100
+
+lprng (3.8.15-1) unstable; urgency=low
+
+ * New upstream source
+ + fixes race condition on remove done jobs.
+ + man page fixes
+
+ -- Craig Small <csmall@eye-net.com.au> Tue, 13 Aug 2002 18:13:05 +1000
+
+lprng (3.8.12-5) unstable; urgency=low
+
+ * Added t to printcap in postinst Closes: #147641, #149718, #149719
+
+ -- Craig Small <csmall@eye-net.com.au> Wed, 12 Jun 2002 10:10:39 +1000
+
+lprng (3.8.12-4) unstable; urgency=low
+
+ * Put /etc/lprng/printcap symlink in if nothing exists already
+ Closes: #147641
+
+ -- Craig Small <csmall@eye-net.com.au> Mon, 3 Jun 2002 09:30:01 +1000
+
+lprng (3.8.12-3) unstable; urgency=low
+
+ * Disabled tcpwrappers Closes: #146511
+ * Removed dh_testversion to stop it complaining during build.
+
+ -- Craig Small <csmall@eye-net.com.au> Thu, 16 May 2002 21:55:53 +1000
+
+lprng (3.8.12-2) unstable; urgency=low
+
+ * Updated config.sub and config.guess again Closes: #146322
+
+ -- Craig Small <csmall@eye-net.com.au> Thu, 9 May 2002 12:54:23 +1000
+
+lprng (3.8.12-1) unstable; urgency=low
+
+ * New upstream source
+ - libwrap linked Closes: #140033
+ - lprng 3.8.11 was withdrawn
+ * Fixed ldconfig post(inst|rm) so lintian (should) stops complaining
+
+ -- Craig Small <csmall@eye-net.com.au> Mon, 6 May 2002 12:59:22 +1000
+
+lprng (3.8.10-1) unstable; urgency=low
+
+ * New upstream version
+ - checkpc behaves itself with print filters Closes: #141090
+ - as and ae options fixed in man page Closes: #137249
+
+ -- Craig Small <csmall@eye-net.com.au> Mon, 8 Apr 2002 09:25:12 +1000
+
+lprng (3.8.9-1) unstable; urgency=low
+
+ * New upstream source
+
+ -- Craig Small <csmall@eye-net.com.au> Sun, 10 Mar 2002 08:35:36 +1100
+
+lprng (3.8.8-2) unstable; urgency=low
+
+ * Fixed lpq -a problem, thanks luca! Closes: #129786
+
+ -- Craig Small <csmall@eye-net.com.au> Mon, 4 Mar 2002 09:18:25 +1100
+
+lprng (3.8.8-1) unstable; urgency=low
+
+ * New upstream version
+ - local printer name should stay same Closes: #130608, #113707
+ * Added new French template Closes: #132389
+ * check for statoverrides
+
+ -- Craig Small <csmall@eye-net.com.au> Sat, 9 Feb 2002 16:40:31 +1100
+
+lprng (3.8.4-2) unstable; urgency=low
+
+ * Changed permissions of /var/run/lprng so non-root can get to it
+ Closes: #129162,#129295
+
+ -- Craig Small <csmall@eye-net.com.au> Tue, 15 Jan 2002 08:43:23 +1100
+
+lprng (3.8.4-1) unstable; urgency=low
+
+ * New upstream version
+ - Now allows Unix socket access /var/run/lprng/socket
+ - Also can shut down tcp/ip access using lpd_port = 0
+ - t1: file 'hfA877', age 24.57 hours > 24.00 hours maximum
+ Closes: #125843
+ * cron job now ignores missing pid file Closes: #127882
+ * init script now has quiet cron Closes: #124284
+
+ -- Craig Small <csmall@eye-net.com.au> Sat, 12 Jan 2002 16:53:55 +1100
+
+lprng (3.8.2-1) unstable; urgency=low
+
+ * New upstream version
+ - New document about printing cookbook
+ * Debconf question about do you want to start lpd.
+ Closes: #57778, #85290, #115574
+ * No longer have a printcap, but there is one in examples.
+ Closes: #71050, #108655
+
+ -- Craig Small <csmall@eye-net.com.au> Wed, 5 Dec 2001 09:37:51 +1100
+
+lprng (3.8.1-1) unstable; urgency=high
+
+ * New upstream source
+ - setuid SECURITY BUG fixed Closes: #120133
+ * checkpc no longer talks about bogus Warning - calling Check_file for
+ messages Closes: #118152
+
+ -- Craig Small <csmall@eye-net.com.au> Thu, 29 Nov 2001 08:10:20 +1100
+
+lprng (3.8.0-1) unstable; urgency=low
+
+ * New upstream source
+ * changed pid filename from printer to 515 Closes: #115235
+ * Deleted liblpr.a and liblpr.la. They were installed for some reason?
+
+ -- Craig Small <csmall@eye-net.com.au> Wed, 17 Oct 2001 08:45:41 +1000
+
+lprng (3.7.7-2) unstable; urgency=low
+
+ * Updated config.guess and config.sub Closes: #114709
+
+ -- Craig Small <csmall@eye-net.com.au> Sun, 7 Oct 2001 21:54:09 +1000
+
+lprng (3.7.7-1) unstable; urgency=low
+
+ * New upstream version
+ - direct flag works, Closes: #97273
+ - group option works, Closes: #85548
+ - checkpc doesn't stuff filters permissions up
+ Closes: #92608, #100086, #100717, #106191
+ - doco fixed up, Closes: #97271, #86394, #108668
+ - Uses right defaults for printer port, Closes: #105387
+ - Direct was a Flag, Closes: #88180
+ * Escape init.d file for funny characters Closes: #107095
+ * Conflicts with cupsys-bsd Closes: #107219
+ * Fixed paths in lpd.conf.5 Closes: #110888
+ * Now have lpd.conf.local Closes:#82393
+ * init.d start has oknodo Closes: #113966
+
+ -- Craig Small <csmall@eye-net.com.au> Thu, 6 Sep 2001 12:53:04 +1000
+
+lprng (3.7.4-5) unstable; urgency=high
+
+ * Added procps to build-depends Closes: #100795
+ * Fixed getrlimit problem Closes: #95989
+ * init.d works for lpd_ports Closes: #97272
+ * Fixed up README.Debian Closes: #99404
+ * Hopefully stopped dinstal from complaining Closes: #94672
+
+ -- Craig Small <csmall@eye-net.com.au> Thu, 21 Jun 2001 08:51:39 +1000
+
+lprng (3.7.4-4) unstable; urgency=high
+
+ * updated config.* for parisc people Closes: #94215
+ * Added pt_BR language to templates, Closes: #92840
+ * Added a patch to fix netmask selection
+
+ -- Craig Small <csmall@debian.org> Fri, 20 Apr 2001 13:07:58 +1000
+
+lprng (3.7.4-3) unstable; urgency=high
+
+ * Added a death to all lpd in postinst hopefully Closes: #88173, #74564
+ * Also #85075, #85267
+ * Debconf has German templates. Closes: #82856
+ * Swedish too Closes: #83611
+ * and French Closes: #83786
+ * cron.daily will not complain if checkpc is not there Closes: #83073, #84276
+ * cron.daily has better error messages Closes: #85869
+ * No longer uses suidregister, hope I don't mess it up!!
+
+ -- Craig Small <csmall@debian.org> Sun, 11 Mar 2001 16:26:54 +1100
+
+lprng (3.7.4-2) unstable; urgency=high
+
+ * small patch to stop evil segfaults on alpha Closes: #82476, #82711
+ * fix so it compiles on alpha Closes: #81707
+
+ -- Craig Small <csmall@debian.org> Sat, 20 Jan 2001 15:10:07 +1100
+
+lprng (3.7.4-1) unstable; urgency=low
+
+ * New upstream release
+ * Split documents out to lprng-doc again.
+
+ -- Craig Small <csmall@debian.org> Thu, 4 Jan 2001 11:12:02 +1100
+
+lprng (3.7.3-1) unstable; urgency=low
+
+ * New upstream source
+ - checks for inet_ntop Closes: #74390
+ * copyright file fixed
+
+ -- Craig Small <csmall@debian.org> Wed, 27 Dec 2000 18:08:43 +1100
+
+lprng (3.7.2-1) unstable; urgency=low
+
+ * New upstream source
+ * Upstream recalled this version before Debian release
+
+ -- Craig Small <csmall@debian.org> Fri, 22 Dec 2000 10:46:20 +1100
+
+lprng (3.6.26-1) unstable; urgency=high
+
+ * New upstream source
+ * SECURITY FIX for gettext NLSPATH security bug
+ * IPv6 stuff removed, Closes: #74390
+
+ -- Craig Small <csmall@debian.org> Mon, 16 Oct 2000 10:43:07 +1100
+
+lprng (3.6.24-3) unstable; urgency=high
+
+ * SECURITY FIX for syslog buffer overflow
+
+ -- Craig Small <csmall@debian.org> Thu, 5 Oct 2000 10:10:47 +1100
+
+lprng (3.6.24-2) unstable; urgency=medium
+
+ * Check for suidregsiter Closes: #69796, #69876, #69877, #69917
+
+ -- Craig Small <csmall@debian.org> Thu, 24 Aug 2000 08:36:46 +1000
+
+lprng (3.6.24-1) unstable; urgency=medium
+
+ * New upstream version
+ * Actually released it, closing 3.6.22 bugs Closes: #67512, #67363
+
+ -- Craig Small <csmall@debian.org> Mon, 21 Aug 2000 11:50:16 +1000
+
+lprng (3.6.22-1) unstable; urgency=medium
+
+ * New upstream source
+ * Removed dependancy on suidmanager Closes: #67512
+ * CPU overload problem fixed Closes: #67363
+ * NEVER RELEASED
+
+ -- Craig Small <csmall@debian.org> Wed, 9 Aug 2000 11:18:31 +1000
+
+lprng (3.6.20-1) unstable; urgency=medium
+
+ * New upstream version
+ * - Fixes checkpc Closes: #66777, #66597
+ * Default config now longer allows remotes to print Closes: #67135
+ This is a security bug!!
+ * Now has the html docs back in, thanks joeyh.
+ * no need for lprng-doc
+ * lpq, lprm and lpr can now be non setuid root. Asked by debconf.
+ * README talks about force_localhost Closes: #64868
+
+ -- Craig Small <csmall@debian.org> Mon, 10 Jul 2000 10:30:19 +1000
+
+lprng (3.6.18-2) unstable; urgency=low
+
+ * Removed references to lpd.conf in /etc/init.d file Closes: #66568
+ * Check and warn if we have old and new config file locations Closes: #66570
+ * Removed debug crud (fff) out of cron.daily Closes: #66613, #66741
+
+ -- Craig Small <csmall@debian.org> Mon, 3 Jul 2000 20:49:19 +1000
+
+lprng (3.6.18-1) unstable; urgency=low
+
+ * New upstream version
+ * Fixed build dependencies (HELLO ROMAN!!) Closes: #66358
+ * Put correct path for checkpc in cron file Closes: #66363, #66471, #66356
+ * Fixed moronic shell stuffup on my part in preinst Closes: #66407, #66400
+ * preinst now deletes old config file locations
+
+ -- Craig Small <csmall@debian.org> Thu, 29 Jun 2000 22:12:59 +1000
+
+lprng (3.6.16-1) unstable; urgency=low
+
+ * New upstream version
+ * Config files found in /etc/lprng
+
+ -- Craig Small <csmall@debian.org> Tue, 20 Jun 2000 09:19:04 +1000
+
+lprng (3.6.14-1) unstable; urgency=low
+
+ * New upstream version - not released
+
+ -- Craig Small <csmall@debian.org> Wed, 7 Jun 2000 20:09:48 +1000
+
+lprng (3.6.12-6) frozen unstable; urgency=medium
+
+ * IMPORTANT Fixed lprm forwarding bug Closes: #64614
+ * Fixes preinst s-s-d problem Closes: #62487, #57098
+ * Remove /var/spool/lpd on purge Closes: #59548
+ * Change path to lpd in lpd.8 Closes: #58341
+ * lpr.1 no longer refers to itself Closes: #60598
+
+ -- Craig Small <csmall@debian.org> Mon, 29 May 2000 09:25:23 +1000
+
+lprng (3.6.12-5) frozen unstable; urgency=medium
+
+ * IMPORTANT BUG IN PPC : Removed kerberos from configure.in Closes: #57565
+
+
+ -- Craig Small <csmall@debian.org> Fri, 11 Feb 2000 09:58:27 +1100
+
+lprng (3.6.12-4) frozen unstable; urgency=low
+
+ * Check for lpd.conf before grepping it RC BUG Closes: #55934
+
+ -- Craig Small <csmall@debian.org> Thu, 3 Feb 2000 16:01:07 +1100
+
+lprng (3.6.12-3) frozen unstable; urgency=low
+
+ * Fixed kill children routine using patch from Patrick
+ * lpq doesn't segfault Closes: #51164
+ * Check for a file in preinst so it doesnt die
+
+ -- Craig Small <csmall@debian.org> Wed, 12 Jan 2000 12:15:15 +1100
+
+lprng (3.6.12-2) unstable; urgency=low
+
+ * Added more stty speeds Closes: #50335
+ * Fixed init.d script so it doesn't reference exec
+ Closes: #45857, #50709, #51824
+ * Check for /usr/share/doc/lprng not /usr/doc/lprng, Closes #49025
+
+ -- Craig Small <csmall@debian.org> Fri, 3 Dec 1999 15:37:19 +1100
+
+lprng (3.6.12-1) unstable; urgency=high
+
+ * New upstream release with SECURITY FIXES
+
+ -- Craig Small <csmall@debian.org> Tue, 2 Nov 1999 12:55:50 +1100
+
+lprng (3.6.11-1) unstable; urgency=low
+
+ * New upstream source
+ * Complains about invalid printer name Closes: #44649
+ * Fixed bashism in postinst Closes: #47527
+
+ -- Craig Small <csmall@debian.org> Mon, 25 Oct 1999 10:02:35 +1000
+
+lprng (3.6.10-2) unstable; urgency=low
+
+ * Fixed postinst Closes: #46239
+ * Fixed copyright file, it uses Artistic not GPL
+
+ -- Craig Small <csmall@debian.org> Thu, 30 Sep 1999 09:41:14 +1000
+
+lprng (3.6.10-1) unstable; urgency=low
+
+ * New upstream version
+ * Attempt to kill old lpd Closes: #44017, #44064
+ * Deleted useless README.Debian Closes: #43946
+ * Fixed postinst for wierd spool files Closes: #44494
+ * init.d goes looking for the pid file Closes: #44953
+ * init.d runs checkpc -f Closes: #44954
+ * Made Joey's build life easier Closes: #44626
+ * lpc manpage now in section 8 Closes: #43922
+
+ -- Craig Small <csmall@debian.org> Mon, 13 Sep 1999 15:21:53 +1000
+
+lprng (3.6.8-3) unstable; urgency=medium
+
+ * Fixed spool permission problem Closes: #43925, #44091, #44108
+
+ -- Craig Small <csmall@debian.org> Sun, 5 Sep 1999 18:25:07 +1000
+
+lprng (3.6.8-2) unstable; urgency=medium
+
+ * Fixed /usr/etc problem Closes: #43870
+
+ -- Craig Small <csmall@debian.org> Wed, 1 Sep 1999 11:00:29 +1000
+
+lprng (3.6.8-1) unstable; urgency=low
+
+ * New upstream version Closes: #36649
+ * Added some suggested scripts Closes: #16959
+ * lpc moved to /usr/sbin Closes: #43027
+ * init.d scripts cd to / Closes: #42068
+ * lpr.1 man page fixed Closes: #35764
+
+ -- Craig Small <csmall@debian.org> Tue, 31 Aug 1999 13:29:03 +1000
+
+lprng (3.6.2-2) unstable; urgency=low
+
+ * Moved /var/run/lpd.printer to /var/run/lprng/lpd.printer Closes: #41185
+ * Fixed init.d to use correct pid file Closes: #41186 #41246
+
+ -- Craig Small <csmall@debian.org> Tue, 13 Jul 1999 13:02:11 +1000
+
+lprng (3.6.2-1) unstable; urgency=low
+
+ * New maintainer
+ * New Upstream Version Closes: #36649
+ * Fixed init.d script Closes: #20577
+ * No ugly prompting in postinst Closes: #12577
+ * lpd.perms manpage fixed Closes: #31892
+ * lpd.8 manpage has proper path Closes: #32418
+ * No bashisms in postinst Closes: #32788 #26519
+ * init.d checks for /usr/doc/lprng as well Closes: #35283
+ * package now uses setuidregister Closes: #36765
+ * lpr now prints mime stuff (woo!) Closes: #26707
+ * init.d script has a path Closes: #19691
+ * LPR HOWTO moved to docs Closes: #30008
+ * No annoying postinst stop Closes: #21407 #32906
+ * Security fix for lpd.perms
+
+ -- Craig Small <csmall@debian.org> Fri, 9 Jul 1999 13:01:51 +1000
+
+lprng (3.5.3-0.1) unstable; urgency=low
+
+ * New upstream version
+
+ -- Robert Woodcock <rcw@debian.org> Fri, 19 Feb 1999 20:20:42 -0800
+
+lprng (3.5.2-1.3) frozen unstable; urgency=low
+
+ * Fix the fix of lpd.perms :( (Bug #32628).
+ (This only changes 5 lines in the default configuration
+ file; thanks to Eric <ej@goomba.dyn.ez-ip.net> for the patch)
+
+ -- Vincent Renardias <vincent@waw.com> Sat, 30 Jan 1999 21:03:51 +0100
+
+lprng (3.5.2-1.2) frozen unstable; urgency=low
+
+ * NMU to fix my previous NMU :(
+ * s/DEFAUT/DEFAULT/ in /etc/lpd.perms (Bug #32527).
+
+ -- Vincent Renardias <vincent@waw.com> Thu, 28 Jan 1999 18:25:19 +0100
+
+lprng (3.5.2-1.1) frozen unstable; urgency=low
+
+ * NMU:
+ Fix critical bug #23682 (changed lpd.perms).
+ Fix critical bug #31889 (swaped 2 lines in postinst).
+
+ -- Vincent Renardias <vincent@waw.com> Sun, 24 Jan 1999 05:18:42 +0100
+
+lprng (3.5.2-1) unstable; urgency=low
+
+ * new upstream version
+
+ -- Sven Rudolph <sr1@inf.tu-dresden.de> Sun, 9 Aug 1998 11:49:02 +0200
+
+lprng (3.4.2-5) frozen unstable; urgency=low
+
+ * debian/conffiles: added /etc/filter.{pcl,ps}
+
+ -- Sven Rudolph <sr1@inf.tu-dresden.de> Wed, 10 Jun 1998 14:29:04 +0200
+
+lprng (3.4.2-4) frozen unstable; urgency=low
+
+ * debian/control: added Conflicts: apsfilter (<<4.9.1-10)
+
+ -- Sven Rudolph <sr1@inf.tu-dresden.de> Wed, 13 May 1998 19:48:48 +0200
+
+lprng (3.4.2-3) frozen unstable; urgency=low
+
+ * debian/rules: move lpc to /usr/sbin/ (Fixes: 21202)
+
+ -- Sven Rudolph <sr1@inf.tu-dresden.de> Thu, 16 Apr 1998 17:04:07 +0200
+
+lprng (3.4.2-2) frozen unstable; urgency=low
+
+ * debian/rc: make messages policy-conforming (Fixes: #20489)
+
+ -- Sven Rudolph <sr1@inf.tu-dresden.de> Mon, 13 Apr 1998 16:18:37 +0200
+
+lprng (3.4.2-1) unstable; urgency=low
+
+ * new upstream version
+ * debian/rules: remove monitor.1 manual page (Fixes: #8690)
+ moved printcap,filter.* to debian/
+ install postrm (Fixes: #14727)
+ * debian/rc: add restart and force-reload targets
+
+ -- Sven Rudolph <sr1@inf.tu-dresden.de> Tue, 3 Mar 1998 00:34:20 +0100
+
+lprng (3.4.1-1) unstable; urgency=low
+
+ * new upstream version (fixes #11015, #8690)
+ * debian/rc: stop) add --oknodo (#12533, #10724)
+ * debian/rules: install filter.* files again (#15180)
+ * fixes #15960 (Cannot unpack source)
+ * src/common/vars.c: set filter_ld_path empty (#15117, probably #9826)
+
+ -- Sven Rudolph <sr1@inf.tu-dresden.de> Mon, 5 Jan 1998 22:04:42 +0100
+
+lprng (3.2.6-2) unstable; urgency=low
+
+ * man/printcap.5: fixed an inconsistency (#11015)
+ * linked against libc6 (#11459, and possibly #10581 and #10555)
+
+ -- Sven Rudolph <sr1@inf.tu-dresden.de> Mon, 4 Aug 1997 17:37:08 +0200
+
+lprng (3.2.6-1) unstable; urgency=low
+
+ * new upstream version
+
+ -- Sven Rudolph <sr1@inf.tu-dresden.de> Sun, 8 Jun 1997 22:57:30 +0200
+
+lprng (3.2.5-1) unstable; urgency=low
+
+ * new upstream version
+ * debian/rc: adapted console messages to standard (#8505)
+ added `reload' rule (#8609)
+ * debian/rules: upstream log is called changelog (#9616)
+ * src/common/default.c; lpd.conf: pr=/usr/bin/pr (#10029)
+
+ -- Sven Rudolph <sr1@inf.tu-dresden.de> Wed, 14 May 1997 22:35:02 +0200
+
+lprng (3.2.1-1) unstable; urgency=low
+
+ * new upstream version
+
+ -- Sven Rudolph <sr1@inf.tu-dresden.de> Tue, 25 Mar 1997 00:04:03 +0100
+
+lprng (3.1.8-1) experimental; urgency=low
+
+ * new upstream version
+
+ -- Sven Rudolph <sr1@inf.tu-dresden.de> Thu, 20 Feb 1997 12:51:11 +0100
+
+lprng (3.1.7-2) experimental; urgency=low
+
+ * install lpd, lpf etc in /usr/sbin
+
+ -- Sven Rudolph <sr1@inf.tu-dresden.de> Wed, 19 Feb 1997 15:18:09 +0100
+
+lprng (3.1.7-1) experimental; urgency=low
+
+ * new upstream version
+ * src/LPR/lpr_cpyfiles.c: removed the patch for recognising
+ Windows Postscript files as text
+ * debian.rc: moved to debian/rc
+ * src/common/default.c, lpd.conf: check_for_nonprintable no
+
+ -- Sven Rudolph <sr1@inf.tu-dresden.de> Wed, 19 Feb 1997 00:26:56 +0100
+
+lprng (2.4.2-1) unstable; urgency=low
+
+ * new upstream version
+ * new upstream version
+ * src/LPR/lpr_cpyfiles.c: recognize Windows-generated PostScript as text
+ * src/common/termclear.c: corrects conflicting definitions of tgetstr
+
+ -- Sven Rudolph <sr1@inf.tu-dresden.de> Thu, 7 Nov 1996 22:35:24 +0100
+
+lprng (2.3.12-3) unstable stable; urgency=high
+
+ * moved to unstable and stable
+ * replaces lpr which has security problems
+
+ -- Sven Rudolph <sr1@inf.tu-dresden.de> Mon, 7 Oct 1996 19:10:48 +0200
+
+lprng (2.3.12-2) experimental; urgency=low
+
+ * (debian/control): install conffiles
+ * (debian/control): added Provides: lpr
+ Suggests: magicfilter
+ Conflicts: lpr
+ Replaces: lpr
+
+ -- Sven Rudolph <sr1@inf.tu-dresden.de> Thu, 26 Sep 1996 17:34:18 +0200
+
+lprng (2.3.12-1) experimental; urgency=low
+
+ * added minimal printcap
+ * run daemon as lp
+ * install daemon and admin programs in /usr/sbin
+ * Initial release.
+
+ -- Sven Rudolph <sr1@inf.tu-dresden.de> Tue, 17 Sep 1996 23:32:15 +0200
+
+Local variables:
+mode: debian-changelog
+End:
--- lprng-3.8.A.orig/debian/postrm
+++ lprng-3.8.A/debian/postrm
@@ -0,0 +1,46 @@
+#! /bin/sh
+# postrm script for LPRng
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+# * <postrm> `remove'
+# * <postrm> `purge'
+# * <old-postrm> `upgrade' <new-version>
+# * <new-postrm> `failed-upgrade' <old-version>
+# * <new-postrm> `abort-install'
+# * <new-postrm> `abort-install' <old-version>
+# * <new-postrm> `abort-upgrade' <old-version>
+# * <disappearer's-postrm> `disappear' <r>overwrit>r> <new-version>
+# for details, see /usr/doc/packaging-manual/
+
+case "$1" in
+ purge)
+ if [ -d /var/spool/lpd ]; then rm -rf /var/spool/lpd ; fi
+ if [ -d /etc/lprng ]; then rm -rf /etc/lprng ; fi
+ if [ -f /etc/default/lprng ]; then rm -f /etc/default/lprng ; fi
+ ;;
+ remove)
+ ;;
+ upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+
+ # update the menu system
+# if [ -x /usr/bin/update-menus ]; then update-menus; fi
+
+ ;;
+
+ *)
+ echo "postrm called with unknown argument \`$1'" >&2
+ exit 0
+
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+
+exit 0
--- lprng-3.8.A.orig/debian/compat
+++ lprng-3.8.A/debian/compat
@@ -0,0 +1 @@
+7
--- lprng-3.8.A.orig/debian/lpd.conf-debian
+++ lprng-3.8.A/debian/lpd.conf-debian
@@ -0,0 +1,5 @@
+# LPRng for Debian GNU/Linux
+# /etc/lprng/lpd.conf
+# See lpd.conf(5) and /usr/share/doc/lprng/examples/lpd.conf.gz
+#
+
--- lprng-3.8.A.orig/debian/NEWS
+++ lprng-3.8.A/debian/NEWS
@@ -0,0 +1,19 @@
+lprng (3.8.A-2.1) unstable; urgency=low
+
+ Programs based on the gtk library (which includes a lot of popular
+ programs in Debian) have lost the ability to print to lpr/lprng.
+
+ A way to work around this problem of gtk+2.0, please use:
+
+ + for a one-user setup, include an entry in the file .gtkrc-2.0 in
+ your home directory with the line:
+
+ gtk-print-backends = "file,lpr"
+
+ + for a system-wide setup, include the same line in the file
+ /etc/gtk-2.0/gtkrc
+
+ It may happen that your setup will be broken again if GTK 3.0 doesn't
+ read the gtk-2.0 files or don't provide an appropriate upgrade path.
+
+ -- Rogério Brito <rbrito@ime.usp.br> Mon, 18 May 2009 21:36:28 -0300
--- lprng-3.8.A.orig/debian/prerm
+++ lprng-3.8.A/debian/prerm
@@ -0,0 +1,45 @@
+#!/bin/sh
+# prerm script for lprng
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+# * <prerm> `remove'
+# * <old-prerm> `upgrade' <new-version>
+# * <new-prerm> `failed-upgrade' <old-version>
+# * <conflictor's-prerm> `remove' `in-favour' <package> <new-version>
+# * <deconfigured's-prerm> `deconfigure' `in-favour'
+# <package-being-installed> <version> `removing'
+# <conflicting-package> <version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+ upgrade|remove)
+ if [ -x "/etc/init.d/lprng" ]; then
+ if [ -x "`which invoke-rc.d 2>/dev/null`" ]; then
+ invoke-rc.d lprng stop
+ else
+ /etc/init.d/lprng stop
+ fi
+ fi
+ ;;
+ deconfigure|failed-upgrade)
+ ;;
+ *)
+ echo "prerm called with unknown argument \`$1'" >&2
+ exit 1
+ ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+
--- lprng-3.8.A.orig/debian/rules
+++ lprng-3.8.A/debian/rules
@@ -0,0 +1,31 @@
+#!/usr/bin/make -f
+
+%:
+ dh --with quilt $@
+
+override_dh_auto_configure:
+ # Required to stop timestamp skew
+ touch configure.in && touch aclocal.m4 && touch configure
+
+ ./configure $(confflags) \
+ --prefix=/ --exec-prefix=/usr \
+ --disable-rpath \
+ --with-config_subdir=lprng \
+ --with-lockfile=/var/run/lprng/lpd \
+ --libexecdir=\$${exec_prefix}/lib/lprng --mandir=\$${exec_prefix}/share/man \
+ --with-localedir=\$${exec_prefix}/share/locale \
+ --with-unix_socket_path=/var/run/lprng/socket \
+ --enable-kerberos_checks --enable-kerberos \
+ --with-groupid=lp \
+ --disable-remote \
+ --enable-lpd.conf.local
+
+override_dh_auto_install:
+ # Add here commands to install the package into debian/lprng.
+ dh_auto_install --with-quilt -- POSTINSTALL=NO DESTDIR=$(CURDIR)/debian/lprng SAMPLESUFFIX=""
+ install -m 644 conf/lpd.perms $(CURDIR)/debian/lprng/etc/lprng
+ install -m 644 debian/lpd.conf-debian $(CURDIR)/debian/lprng/etc/lprng/lpd.conf
+ chmod 644 $(CURDIR)/debian/lprng/etc/lprng/lpd.conf
+ # Remove sample printcap
+ rm $(CURDIR)/debian/lprng/etc/printcap
+
--- lprng-3.8.A.orig/debian/docs
+++ lprng-3.8.A/debian/docs
@@ -0,0 +1,3 @@
+CONTRIBUTORS
+README
+README.SSL.SECURITY
--- lprng-3.8.A.orig/debian/patches/10_lpd_perms_n.patch
+++ lprng-3.8.A/debian/patches/10_lpd_perms_n.patch
@@ -0,0 +1,13 @@
+Author: <csmall@debian.org>
+Description: Changed .l tags to .B
+--- lprng-3.8.A.orig/man/lpd.perms.n
++++ lprng-3.8.A/man/lpd.perms.n
+@@ -72,7 +72,7 @@
+ and
+ Q for queue information (i.e.- LPQ request).
+ The
+-.l X
++.B X
+ key is used when checking for connection information.
+ .LP
+ Initially,
--- lprng-3.8.A.orig/debian/patches/20_kfreebsd_stty.patch
+++ lprng-3.8.A/debian/patches/20_kfreebsd_stty.patch
@@ -0,0 +1,19 @@
+Author: <csmall@debian.org>
+Description: lprng builds on kfreebsd #537857
+Index: lprng-3.8.A/src/common/stty.c
+===================================================================
+--- lprng-3.8.A.orig/src/common/stty.c 2009-09-22 15:03:59.000000000 +1000
++++ lprng-3.8.A/src/common/stty.c 2009-09-22 15:24:19.000000000 +1000
+@@ -758,8 +758,12 @@
+ #endif
+ #ifdef TABDLY
+ {"TAB0", TAB0, TABDLY},
++#ifdef TAB1
+ {"TAB1", TAB1, TABDLY},
++#endif
++#ifdef TAB2
+ {"TAB2", TAB2, TABDLY},
++#endif
+ {"TAB3", TAB3, TABDLY},
+ #endif
+ #ifdef BSDLY
--- lprng-3.8.A.orig/debian/patches/manpage_symlink.patch
+++ lprng-3.8.A/debian/patches/manpage_symlink.patch
@@ -0,0 +1,14 @@
+Index: lprng-3.8.A/man/pclbanner.n
+===================================================================
+--- lprng-3.8.A.orig/man/pclbanner.n 2009-09-22 15:10:46.000000000 +1000
++++ lprng-3.8.A/man/pclbanner.n 2009-09-22 15:10:59.000000000 +1000
+@@ -1 +1 @@
+-.so man3/lpbanner.3
++.so man1/lpbanner.1
+Index: lprng-3.8.A/man/psbanner.n
+===================================================================
+--- lprng-3.8.A.orig/man/psbanner.n 2009-09-22 15:11:26.000000000 +1000
++++ lprng-3.8.A/man/psbanner.n 2009-09-22 15:11:32.000000000 +1000
+@@ -1 +1 @@
+-.so man3/lpbanner.3
++.so man1/lpbanner.1
--- lprng-3.8.A.orig/debian/patches/series
+++ lprng-3.8.A/debian/patches/series
@@ -0,0 +1,5 @@
+manpage_symlink.patch
+10_lpd_conf_n.patch
+10_lpd_n.patch
+10_lpd_perms_n.patch
+20_kfreebsd_stty.patch
--- lprng-3.8.A.orig/debian/patches/10_lpd_conf_n.patch
+++ lprng-3.8.A/debian/patches/10_lpd_conf_n.patch
@@ -0,0 +1,30 @@
+Author: <csmall@debian.org>
+Description: Describes lpd_listen_port Closes: #492684
+Index: lprng-3.8.A/man/lpd.conf.n
+===================================================================
+--- lprng-3.8.A.orig/man/lpd.conf.n 2009-09-22 15:42:43.000000000 +1000
++++ lprng-3.8.A/man/lpd.conf.n 2009-09-22 15:50:04.000000000 +1000
+@@ -376,8 +376,13 @@
+ If the backwards_compatible flag is set,
+ only 3 digit numbers will be used.
+ .TP
++\fBlpd_listen_port\fR (default: off) [ipaddr%]port
++The port that \fBlpd\fR binds to. If the parameter is set to off then
++\fBlpd\fR does not listen to any TCP port. See \fBlpd_port\fR for
++details of the format of the argument.
++.TP
+ \fBlpd_port\fR (default: \fIprinter\fR) [ipaddr%]port
+-The port that \fBlpd\fR binds to, and that \fBlpr\fR and
++The port that \fBlpr\fR and
+ the other client programs send their requests to.
+ The specification has the format ipaddr%port.
+ If the IP address is specified then a bind to only this address and
+@@ -498,7 +503,7 @@
+ See PRINTCAP LOOKUP for details.
+ .TP
+ \fBperms_path\fR
+-(default: /etc/lpd.perms:/usr/etc/lpd.perms:/var/spool/lpd/lpd.perms.%h)
++(default: /etc/lpd.perms:/usr/etc/lpd.perms: /var/spool/lpd/lpd.perms.%h)
+ The location of the printer permissions database.
+ If a file or filter does not exist, it is skipped.
+ The first file or filter that exists and is readable will be used.
--- lprng-3.8.A.orig/debian/patches/10_lpd_n.patch
+++ lprng-3.8.A/debian/patches/10_lpd_n.patch
@@ -0,0 +1,40 @@
+Author: <csmall@debian.org>
+Description: Minor man page corrections for lpd.n
+--- lprng-3.8.A.orig/man/lpd.n
++++ lprng-3.8.A/man/lpd.n
+@@ -162,7 +162,7 @@
+ Q for queue information (i.e.- LPRM request),
+ and so forth.
+ The
+-.l X
++.B X
+ key indicates the initial connection to the LPD spooler,
+ and can be used to control connections from remote systems.
+ The
+@@ -820,7 +820,7 @@
+ Normally job files are forwarded to a printer without
+ modification.
+ The
+-.b lpd_bounce
++.B lpd_bounce
+ flag makes the queue a
+ .I "bounce queue"
+ and allows banners to be generated and
+@@ -1251,13 +1251,13 @@
+ The options for the filter command line will be replaced by appropriate
+ values.
+ Option specifications have the form $[0| ][-]X.
+-." Option specifications have the form $[0| ][-][']X.
++.\" Option specifications have the form $[0| ][-][']X.
+ The default option expansion has the form $X -> -X'value';
+ the form $0X or $(space)X adds a space after the -X, i.e.- $0X -> -X 'value';
+ the form $-X suppresses the -X, i.e. - $-X -> value.
+-." the form $-X suppresses the -X, i.e. - $-X -> 'value';
+-." and the form $'X suppresses the quotes around the value.
+-." Note that the 0,-, and ' can be combined. For example, $-'X -> value.
++.\" the form $-X suppresses the -X, i.e. - $-X -> 'value';
++.\" and the form $'X suppresses the quotes around the value.
++.\" Note that the 0,-, and ' can be combined. For example, $-'X -> value.
+ The options will be expanded as follows:
+ .RS
+ .sp
--- lprng-3.8.A.orig/debian/po/POTFILES.in
+++ lprng-3.8.A/debian/po/POTFILES.in
@@ -0,0 +1 @@
+[type: gettext/rfc822deb] templates
--- lprng-3.8.A.orig/debian/po/bugreport.cgi?msg=5;filename=ja.po;att=1;bug=463249
+++ lprng-3.8.A/debian/po/bugreport.cgi?msg=5;filename=ja.po;att=1;bug=463249
@@ -0,0 +1,106 @@
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: lprng 3.8.A~rc2-1\n"
+"Report-Msgid-Bugs-To: csmall@debian.org\n"
+"POT-Creation-Date: 2006-08-01 21:12+1000\n"
+"PO-Revision-Date: 2008-01-30 21:26+0900\n"
+"Last-Translator: Hideki Yamane (Debian-JP) <henrich@debian.or.jp>\n"
+"Language-Team: Japanese <debian-japanese@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "There are two lpd.conf files"
+msgstr "lpd.conf ãã¡ã¤ã«ã2ã¤ããã¾ã"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid ""
+"You have a lpd.conf in the old location (/etc/lpd.conf) and the new location "
+"(/etc/lprng/lpd.conf). From lprng version 3.6.16-1 this file should be only "
+"in /etc/lprng, please check both files and remove /etc/lpd.conf"
+msgstr ""
+"lpd.conf ãå¤ãå ´æ (/etc/lpd.conf) ã¨æ°ããå ´æ (/etc/lprng/lpd.conf) ã«ãã"
+"ã¾ããlprng ã§ã¯ãã¼ã¸ã§ã³ 3.6.16-1 ãããã®ãã¡ã¤ã«ã¯ /etc/lprng ã ãã«ç½®ãã"
+"ãã«ããªãã¨ããã¾ããã両æ¹ã®ãã¡ã¤ã«ã確èªããä¸ã§ /etc/lpd.conf ãåé¤ãã¦"
+"ãã ããã"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "There are two lpd.perms files"
+msgstr "lpd.perms ãã¡ã¤ã«ã2ã¤ããã¾ãã"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid ""
+"You have a lpd.perms in the old location (/etc/lpd.perms) and the new "
+"location (/etc/lprng/lpd.perms). Since lprng version 3.6.16-1 this file "
+"should be only in /etc/lprng, please check both files and remove /etc/lpd."
+"perms"
+msgstr ""
+"lpd.perms ãå¤ãå ´æ (/etc/lpd.perms) ã¨æ°ããå ´æ (/etc/lprng/lpd.perms) ã«"
+"ããã¾ãããã¼ã¸ã§ã³ 3.6.16-1 ã® lprng ããã¯ããã®ãã¡ã¤ã«ã¯ /etc/lprng ã ã"
+"ã«ç½®ãããã«ããªãã¨ããã¾ããã両æ¹ã®ãã¡ã¤ã«ã確èªããä¸ã§ /etc/lpd.perms "
+"ãåé¤ãã¦ãã ããã"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Make lpr, lprm and lpq setuid root?"
+msgstr "lpr, lprm, lpq ã root ã« setuid ãã¾ãã?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"For full RFC1179 compliance you need to make these programs setuid root. "
+"This is mainly so they can create a socket with a low port number. The low "
+"port number may be important if you have network printers or have adjusted /"
+"etc/lprng/lpd.perms to restrict access to non-privledged ports. For the "
+"typical printer connected locally to parallel port (and many other) scenario "
+"you can leave these programs non setuid root."
+msgstr ""
+"RFC1179 ã«å®å
¨ã«é©åããããã«ã¯ããããã®ããã°ã©ã ã root ã« setuid ããå¿
"
+"è¦ãããã¾ãããã㯠1024 以ä¸ã®ãã¼ãçªå·ã§ãããã®ããã°ã©ã ãã½ã±ãããä½"
+"ããããã«ããã®ã主ãªçç±ã§ãããããã¯ã¼ã¯ããªã³ã¿ãéç¹æ¨©ãã¼ãã¸ã®ã¢ã¯ã»"
+"ã¹ãå¶éããããã« /etc/lprng/lpd.perms ã調æ´ãã¦ããå ´åã¯ã1024 以ä¸ã®ãã¼"
+"ãçªå·ãéè¦ããããã¾ãããç¹ã«ãã¼ã«ã«ã®ãã©ã¬ã«ãã¼ã (ä»å¤æ°) ã«ããªã³ã¿"
+"ãæ¥ç¶ãã¦ããå ´åãããã°ã©ã ãroot ã« setuid ããªãã¦ãæ§ãã¾ããã"
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Start lpd (Printer Daemon) at boot?"
+msgstr "ã·ã¹ãã èµ·åæã« lpd (ããªã³ã¿ãã¼ã¢ã³) ãç«ã¡ä¸ãã¾ãã?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid ""
+"Some people for various reasons do not want to start lpd. Refusing this "
+"option means lpd will not start. Unless you know why you want lpd not to "
+"start, just accept the default."
+msgstr ""
+"æ§ã
ãªçç±ã§ lpd ãèµ·åããããªã人ããã¾ãããã®é¸æãæå¦ãã㨠lpd ã¯èµ·å"
+"ãã¾ãããlpd ãèµ·åãããçç±ãæãã¤ããªãå ´åãåã«ãã¯ãããé¸ãã§ãã ã"
+"ãã"
--- lprng-3.8.A.orig/debian/po/sv.po
+++ lprng-3.8.A/debian/po/sv.po
@@ -0,0 +1,107 @@
+# translation of lprng_3.8.A-1_sv.po to Swedish
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+# Developers do not need to manually edit POT or PO files.
+#
+# Martin Ågren <martin.agren@gmail.com>, 2008.
+msgid ""
+msgstr ""
+"Project-Id-Version: lprng_3.8.A-1_sv\n"
+"Report-Msgid-Bugs-To: csmall@debian.org\n"
+"POT-Creation-Date: 2006-08-01 21:12+1000\n"
+"PO-Revision-Date: 2008-07-23 20:21+0200\n"
+"Last-Translator: Martin Ågren <martin.agren@gmail.com>\n"
+"Language-Team: Swedish <debian-l10n-swedish@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "There are two lpd.conf files"
+msgstr "Det finns två lpd.conf-filer"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid ""
+"You have a lpd.conf in the old location (/etc/lpd.conf) and the new location "
+"(/etc/lprng/lpd.conf). From lprng version 3.6.16-1 this file should be only "
+"in /etc/lprng, please check both files and remove /etc/lpd.conf"
+msgstr ""
+"Du har lpd.conf på den gamla platsen (/etc/lpd.conf) och den nya platsen (/"
+"etc/lprng/lpd.conf.) Sedan version 3.6.16-1 av lprng ska denna fil endast "
+"finnas i /etc/lprng. Kontrollera därför båda filerna och ta bort /etc/lpd."
+"conf"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "There are two lpd.perms files"
+msgstr "Det finns två lpd.perms-filer"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid ""
+"You have a lpd.perms in the old location (/etc/lpd.perms) and the new "
+"location (/etc/lprng/lpd.perms). Since lprng version 3.6.16-1 this file "
+"should be only in /etc/lprng, please check both files and remove /etc/lpd."
+"perms"
+msgstr ""
+"Du har lpd.perms på den äldre platsen (/etc/lpd.perms) och den nya platsen (/"
+"etc/lprng/lpd.perms.) Sedan version 3.6.16-1 av lprng ska denna fil endast "
+"finnas i /etc/lprng. Kontrollera därför båda filerna och ta bort /etc/lpd."
+"perms"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Make lpr, lprm and lpq setuid root?"
+msgstr "Gör lpr, lprm och lpq setuid root?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"For full RFC1179 compliance you need to make these programs setuid root. "
+"This is mainly so they can create a socket with a low port number. The low "
+"port number may be important if you have network printers or have adjusted /"
+"etc/lprng/lpd.perms to restrict access to non-privledged ports. For the "
+"typical printer connected locally to parallel port (and many other) scenario "
+"you can leave these programs non setuid root."
+msgstr ""
+"För fullständig enighet med RFC1179 måste du göra dessa program setuid root. "
+"Detta är främst för att de skall kunna skapa en socket med lågt portnummer. "
+"Det låga portnumret kan vara viktigt om du har nätverksskrivare eller har "
+"anpassat /etc/lprng/lpd.perms för att begränsa tillträde till icke-"
+"priviligerade portar. För den typiska skrivaren ansluten lokalt till "
+"parallellporten (och många andra scenarion) kan du lämna dessa program utan "
+"setuid root."
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Start lpd (Printer Daemon) at boot?"
+msgstr "Starta lpd (utskriftserver-demonen) vid boot?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid ""
+"Some people for various reasons do not want to start lpd. Refusing this "
+"option means lpd will not start. Unless you know why you want lpd not to "
+"start, just accept the default."
+msgstr ""
+"Somliga personer väljer av olika skäl att inte starta lpd. Att inte välja "
+"start här betyder att lpd inte startas. Det rekommenderas att välja "
+"standardinställningen."
--- lprng-3.8.A.orig/debian/po/da.po
+++ lprng-3.8.A/debian/po/da.po
@@ -0,0 +1,106 @@
+# translation of lprng_3.8.25-1_templates.po to Danish
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans#
+# Developers do not need to manually edit POT or PO files.
+# Claus Hindsgaul <claus_h@image.dk>, 2004, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: lprng_3.8.25-1_templates\n"
+"Report-Msgid-Bugs-To: csmall@debian.org\n"
+"POT-Creation-Date: 2006-08-01 21:12+1000\n"
+"PO-Revision-Date: 2005-12-15 11:19+0100\n"
+"Last-Translator: Claus Hindsgaul <claus_h@image.dk>\n"
+"Language-Team: Danish <dansk@klid.dk>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.10.2\n"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "There are two lpd.conf files"
+msgstr "Der er to lpd.conf-filer"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid ""
+"You have a lpd.conf in the old location (/etc/lpd.conf) and the new location "
+"(/etc/lprng/lpd.conf). From lprng version 3.6.16-1 this file should be only "
+"in /etc/lprng, please check both files and remove /etc/lpd.conf"
+msgstr ""
+"Du har både en lpd.conf på den gamle placering (/etc/lpd.conf) og den nye (/"
+"etc/lprng/lpd.conf). Siden version 3.6.16-1 af lprng skal denne fil kun "
+"ligge under /etc/lprng. Tjek venligst begge filerne og fjern /etc/lpd.conf"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "There are two lpd.perms files"
+msgstr "Der er to lpd.perms-filer"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid ""
+"You have a lpd.perms in the old location (/etc/lpd.perms) and the new "
+"location (/etc/lprng/lpd.perms). Since lprng version 3.6.16-1 this file "
+"should be only in /etc/lprng, please check both files and remove /etc/lpd."
+"perms"
+msgstr ""
+"Der ligger både en lpd.conf på den gamle placering (/etc/lpd.perms), og den "
+"nye (/etc/lprng/lpd.perms). Siden version 3.6.16-1 af lprng skal denne fil "
+"kun ligge under /etc/lprng. Tjek venligst begge filerne og fjern /etc/lpd."
+"perms"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Make lpr, lprm and lpq setuid root?"
+msgstr "Gør lpr, lprm og lpq 'setuid root'?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"For full RFC1179 compliance you need to make these programs setuid root. "
+"This is mainly so they can create a socket with a low port number. The low "
+"port number may be important if you have network printers or have adjusted /"
+"etc/lprng/lpd.perms to restrict access to non-privledged ports. For the "
+"typical printer connected locally to parallel port (and many other) scenario "
+"you can leave these programs non setuid root."
+msgstr ""
+"For at overholde RFC1179 fuldstændigt skal disse programmer gøres 'setuid "
+"root'. Det gøres hovedsageligt for at de kan oprette en sokkel med et lavt "
+"portnummer. Det lave portnummer kan være vigtigt hvis du har netværks-"
+"printere eller har indstillet /etc/lprng/lpd.perms til at begrænse adgangen "
+"til ikke-priviligerede porte. For de mest typiske scenarier, hvor f.eks. en "
+"printer er forbundet lokalt til den parallelle port kan du sagtens undlade "
+"at gøre disse programmer 'setuid root'."
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Start lpd (Printer Daemon) at boot?"
+msgstr "Start lpd (printerdæmonen) under opstarten?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid ""
+"Some people for various reasons do not want to start lpd. Refusing this "
+"option means lpd will not start. Unless you know why you want lpd not to "
+"start, just accept the default."
+msgstr ""
+"Af forskellige grunde er der nogen, der ikke ønsker at starte lpd. Hvis du "
+"afviser her, vil lpd ikke starte. Medmindre du har en god grund til ikke at "
+"starte lpd, bør du blot acceptere standardsvaret."
--- lprng-3.8.A.orig/debian/po/ru.po
+++ lprng-3.8.A/debian/po/ru.po
@@ -0,0 +1,100 @@
+# translation of ru.po to Russian
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Yuri Kozlov <kozlov.y@gmail.com>, 2008.
+msgid ""
+msgstr ""
+"Project-Id-Version: ru\n"
+"Report-Msgid-Bugs-To: csmall@debian.org\n"
+"POT-Creation-Date: 2006-08-01 21:12+1000\n"
+"PO-Revision-Date: 2008-08-09 22:57+0400\n"
+"Last-Translator: Yuri Kozlov <kozlov.y@gmail.com>\n"
+"Language-Team: Russian <debian-l10n-russian@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
+"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "There are two lpd.conf files"
+msgstr "ÐбнаÑÑжено два Ñайла lpd.conf"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid ""
+"You have a lpd.conf in the old location (/etc/lpd.conf) and the new location "
+"(/etc/lprng/lpd.conf). From lprng version 3.6.16-1 this file should be only "
+"in /etc/lprng, please check both files and remove /etc/lpd.conf"
+msgstr ""
+"Ð ÑиÑÑеме обнаÑÑжен ÑÑаÑÑй Ñайл lpd.conf (/etc/lpd.conf), а Ñакже новÑй Ñайл "
+"(/etc/lprng/lpd.conf). Ð lprng, наÑÐ¸Ð½Ð°Ñ Ñ Ð²ÐµÑÑии 3.6.16-1, ÑÑÐ¾Ñ Ñайл должен "
+"бÑÑÑ ÑолÑко в каÑалоге /etc/lprng, пÑовеÑÑÑе оба Ñайла и ÑдалиÑе /etc/lpd."
+"conf"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "There are two lpd.perms files"
+msgstr "ÐбнаÑÑжено два Ñайла lpd.perms"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid ""
+"You have a lpd.perms in the old location (/etc/lpd.perms) and the new "
+"location (/etc/lprng/lpd.perms). Since lprng version 3.6.16-1 this file "
+"should be only in /etc/lprng, please check both files and remove /etc/lpd."
+"perms"
+msgstr ""
+"Ð ÑиÑÑеме обнаÑÑжен ÑÑаÑÑй Ñайл (/etc/lpd.perms), а Ñакже новÑй Ñайл (/etc/"
+"lprng/lpd.perms). Ð lprng, наÑÐ¸Ð½Ð°Ñ Ñ Ð²ÐµÑÑии 3.6.16-1, ÑÑÐ¾Ñ Ñайл должен бÑÑÑ "
+"ÑолÑко в каÑалоге /etc/lprng, пÑовеÑÑÑе оба Ñайла и ÑдалиÑе /etc/lpd.perms"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Make lpr, lprm and lpq setuid root?"
+msgstr "УÑÑановиÑÑ setuid-Ð±Ð¸Ñ Ð½Ð° lpr, lprm и lpq и пÑинадлежноÑÑÑ root?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"For full RFC1179 compliance you need to make these programs setuid root. "
+"This is mainly so they can create a socket with a low port number. The low "
+"port number may be important if you have network printers or have adjusted /"
+"etc/lprng/lpd.perms to restrict access to non-privledged ports. For the "
+"typical printer connected locally to parallel port (and many other) scenario "
+"you can leave these programs non setuid root."
+msgstr ""
+"ÐÐ»Ñ Ð¿Ð¾Ð»Ð½Ð¾Ð³Ð¾ ÑооÑвеÑÑÑÐ²Ð¸Ñ RFC1179 вам нÑжно ÑÑÑановиÑÑ Ð½Ð° ÑÑи пÑогÑÐ°Ð¼Ð¼Ñ "
+"setuid-Ð±Ð¸Ñ Ð¸ они Ð´Ð¾Ð»Ð¶Ð½Ñ Ð¿ÑинадлежаÑÑ root. РоÑновном, ÑÑо нÑжно Ð´Ð»Ñ Ñого, "
+"ÑÑÐ¾Ð±Ñ Ð¾Ð½Ð¸ могли ÑоздаÑÑ ÑÐ¾ÐºÐµÑ Ñ Ð¼Ð¸Ð½Ð¸Ð¼Ð°Ð»ÑнÑм номеÑом поÑÑа. ÐинималÑнÑй Ð½Ð¾Ð¼ÐµÑ "
+"поÑÑа важен, еÑли ÑÑо ÑеÑевÑе пÑинÑеÑÑ Ð¸ Ñ Ð²Ð°Ñ ÐµÑÑÑ Ð½Ð°ÑÑÑоеннÑй Ñайл /etc/"
+"lprng/lpd.perms Ð´Ð»Ñ Ð¾Ð³ÑаниÑÐµÐ½Ð¸Ñ Ð´Ð¾ÑÑÑпа к непÑивилегиÑованнÑм поÑÑам. ÐÐ»Ñ "
+"обÑÑного пÑинÑеÑ, подклÑÑÑнного к локалÑÐ½Ð¾Ð¼Ñ Ð¿Ð¾ÑÑÑ, можно не ÑÑÑанавливаÑÑ "
+"setuid-биÑ."
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Start lpd (Printer Daemon) at boot?"
+msgstr "ÐапÑÑкаÑÑ lpd (ÑлÑжба пеÑаÑи) пÑи вклÑÑении компÑÑÑеÑа?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid ""
+"Some people for various reasons do not want to start lpd. Refusing this "
+"option means lpd will not start. Unless you know why you want lpd not to "
+"start, just accept the default."
+msgstr ""
+"ÐекоÑоÑÑе лÑди по ÑазлиÑнÑм пÑиÑинам не Ñ
оÑÑÑ Ð·Ð°Ð¿ÑÑкаÑÑ lpd. ЧÑÐ¾Ð±Ñ lpd не "
+"запÑÑкалÑÑ, оÑвеÑÑÑе оÑÑиÑаÑелÑно. ÐÑли пÑиÑин Ð´Ð»Ñ Ð¾Ñказа Ð¾Ñ Ð·Ð°Ð¿ÑÑка lpd Ñ "
+"Ð²Ð°Ñ Ð½ÐµÑ, ÑоглаÑиÑеÑÑ Ñ Ð´ÐµÐ¹ÑÑвием по ÑмолÑаниÑ."
--- lprng-3.8.A.orig/debian/po/ja.po
+++ lprng-3.8.A/debian/po/ja.po
@@ -0,0 +1,106 @@
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: lprng 3.8.A~rc2-1\n"
+"Report-Msgid-Bugs-To: csmall@debian.org\n"
+"POT-Creation-Date: 2006-08-01 21:12+1000\n"
+"PO-Revision-Date: 2008-01-30 21:26+0900\n"
+"Last-Translator: Hideki Yamane (Debian-JP) <henrich@debian.or.jp>\n"
+"Language-Team: Japanese <debian-japanese@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "There are two lpd.conf files"
+msgstr "lpd.conf ãã¡ã¤ã«ã2ã¤ããã¾ã"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid ""
+"You have a lpd.conf in the old location (/etc/lpd.conf) and the new location "
+"(/etc/lprng/lpd.conf). From lprng version 3.6.16-1 this file should be only "
+"in /etc/lprng, please check both files and remove /etc/lpd.conf"
+msgstr ""
+"lpd.conf ãå¤ãå ´æ (/etc/lpd.conf) ã¨æ°ããå ´æ (/etc/lprng/lpd.conf) ã«ãã"
+"ã¾ããlprng ã§ã¯ãã¼ã¸ã§ã³ 3.6.16-1 ãããã®ãã¡ã¤ã«ã¯ /etc/lprng ã ãã«ç½®ã"
+"ããã«ããªãã¨ããã¾ããã両æ¹ã®ãã¡ã¤ã«ã確èªããä¸ã§ /etc/lpd.conf ãåé¤ã"
+"ã¦ãã ããã"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "There are two lpd.perms files"
+msgstr "lpd.perms ãã¡ã¤ã«ã2ã¤ããã¾ãã"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid ""
+"You have a lpd.perms in the old location (/etc/lpd.perms) and the new "
+"location (/etc/lprng/lpd.perms). Since lprng version 3.6.16-1 this file "
+"should be only in /etc/lprng, please check both files and remove /etc/lpd."
+"perms"
+msgstr ""
+"lpd.perms ãå¤ãå ´æ (/etc/lpd.perms) ã¨æ°ããå ´æ (/etc/lprng/lpd.perms) ã«"
+"ããã¾ãããã¼ã¸ã§ã³ 3.6.16-1 ã® lprng ããã¯ããã®ãã¡ã¤ã«ã¯ /etc/lprng ã ã"
+"ã«ç½®ãããã«ããªãã¨ããã¾ããã両æ¹ã®ãã¡ã¤ã«ã確èªããä¸ã§ /etc/lpd.perms "
+"ãåé¤ãã¦ãã ããã"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Make lpr, lprm and lpq setuid root?"
+msgstr "lpr, lprm, lpq ã root ã« setuid ãã¾ãã?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"For full RFC1179 compliance you need to make these programs setuid root. "
+"This is mainly so they can create a socket with a low port number. The low "
+"port number may be important if you have network printers or have adjusted /"
+"etc/lprng/lpd.perms to restrict access to non-privledged ports. For the "
+"typical printer connected locally to parallel port (and many other) scenario "
+"you can leave these programs non setuid root."
+msgstr ""
+"RFC1179 ã«å®å
¨ã«é©åããããã«ã¯ããããã®ããã°ã©ã ã root ã« setuid ããå¿
"
+"è¦ãããã¾ãããã㯠1024 以ä¸ã®ãã¼ãçªå·ã§ãããã®ããã°ã©ã ãã½ã±ãããä½"
+"ããããã«ããã®ã主ãªçç±ã§ãããããã¯ã¼ã¯ããªã³ã¿ãéç¹æ¨©ãã¼ãã¸ã®ã¢ã¯ã»"
+"ã¹ãå¶éããããã« /etc/lprng/lpd.perms ã調æ´ãã¦ããå ´åã¯ã1024 以ä¸ã®ãã¼"
+"ãçªå·ãéè¦ããããã¾ãããç¹ã«ãã¼ã«ã«ã®ãã©ã¬ã«ãã¼ã (ä»å¤æ°) ã«ããªã³ã¿"
+"ãæ¥ç¶ãã¦ããå ´åãããã°ã©ã ãroot ã« setuid ããªãã¦ãæ§ãã¾ããã"
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Start lpd (Printer Daemon) at boot?"
+msgstr "ã·ã¹ãã èµ·åæã« lpd (ããªã³ã¿ãã¼ã¢ã³) ãç«ã¡ä¸ãã¾ãã?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid ""
+"Some people for various reasons do not want to start lpd. Refusing this "
+"option means lpd will not start. Unless you know why you want lpd not to "
+"start, just accept the default."
+msgstr ""
+"æ§ã
ãªçç±ã§ lpd ãèµ·åããããªã人ããã¾ãããã®é¸æãæå¦ãã㨠lpd ã¯èµ·å"
+"ãã¾ãããlpd ãèµ·åãããçç±ãæãã¤ããªãå ´åãåã«ãã¯ãããé¸ãã§ãã ã"
+"ãã"
--- lprng-3.8.A.orig/debian/po/vi.po
+++ lprng-3.8.A/debian/po/vi.po
@@ -0,0 +1,66 @@
+# Vietnamese Translation for lprng.
+# Copyright © 2008 Free Software Foundation, Inc.
+# Clytie Siddall <clytie@riverland.net.au>, 2005-2008.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: lprng 3.8.A-1.1\n"
+"Report-Msgid-Bugs-To: csmall@debian.org\n"
+"POT-Creation-Date: 2006-08-01 21:12+1000\n"
+"PO-Revision-Date: 2008-09-24 21:53+0930\n"
+"Last-Translator: Clytie Siddall <clytie@riverland.net.au>\n"
+"Language-Team: Vietnamese <vi-VN@googlegroups.com>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: LocFactoryEditor 1.7b3\n"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "There are two lpd.conf files"
+msgstr "Có hai táºp tin «lpd.conf» rá»i."
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "You have a lpd.conf in the old location (/etc/lpd.conf) and the new location (/etc/lprng/lpd.conf). From lprng version 3.6.16-1 this file should be only in /etc/lprng, please check both files and remove /etc/lpd.conf"
+msgstr "Bạn có má»t táºp tin cấu hình « lpd.conf » á» vá» trà cÅ© (« /etc/lpd.conf ») và cÅ©ng á» vá» trà má»i (« /etc/lprng/lpd.conf »). Ká» từ lprng phiên bản 3.6.16-1, táºp tin nà y nên nằm chá» trong « /etc/lprng »: xin hãy kiá»m tra cả hai táºp tin nà y và gỡ bỠ« /etc/lpd.conf »."
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "There are two lpd.perms files"
+msgstr "Có hai táºp tin « lpd.perms »"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "You have a lpd.perms in the old location (/etc/lpd.perms) and the new location (/etc/lprng/lpd.perms). Since lprng version 3.6.16-1 this file should be only in /etc/lprng, please check both files and remove /etc/lpd.perms"
+msgstr "Có má»t táºp tin « lpd.perms » á» vá» trà cÅ© (/etc/lpd.perms) và Ỡvá» trà má»i (/etc/lprng/lpd.perms). Ká» từ lprng phiên bản 3.6.16-1, táºp tin nà y nên nằm chá» trong thÆ° mục « /etc/lprng »: xin hãy kiá»m tra cả hai táºp tin nà y và gỡ bỠ« /etc/lpd.perms »."
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Make lpr, lprm and lpq setuid root?"
+msgstr "Äặt setuid root cho lpr, lprm và lpq không?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "For full RFC1179 compliance you need to make these programs setuid root. This is mainly so they can create a socket with a low port number. The low port number may be important if you have network printers or have adjusted /etc/lprng/lpd.perms to restrict access to non-privledged ports. For the typical printer connected locally to parallel port (and many other) scenario you can leave these programs non setuid root."
+msgstr "Äá» tuân theo RFC1179 hoà n thà nh, bạn cần phải Äặt setuid root cho những chÆ°Æ¡ng trình nà y. Thiết láºp nà y phần lá»n Äá» có quyá»n tạo má»t á» cá»ng vá»i má»t sá» thứ tá»± cá»ng thấp. Sá» thứ tá»± cá»ng thấp có thá» quan trá»ng nếu bạn có máy in chạy qua mạng hoặc Äã Äiá»u chá»nh táºp tin « /etc/lprng/lpd.perms » Äá» hạn chế truy cáºp thà nh những cá»ng không cần quyá»n Äặc biá»t. Äá»i vá»i ká»ch bản bình thÆ°á»ng có máy in Äược kết ná»i cục bá» Äến cá»ng song song (và nhiá»u ká»ch bản khác), cÅ©ng có thá» Äá» lại các trình nà y không có setuid root."
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Start lpd (Printer Daemon) at boot?"
+msgstr "Khá»i chạy trình ná»n in lpd khi khá»i Äá»ng máy không?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Some people for various reasons do not want to start lpd. Refusing this option means lpd will not start. Unless you know why you want lpd not to start, just accept the default."
+msgstr "Má»t sá» ngÆ°á»i nà o Äó, vì nhiá»u lý do khác nhau, không muá»n khá»i chạy trình ná»n in lpd. Từ chá»i tùy chá»n nà y có nghÄ©a là trình lpd sẽ không khá»i chạy. Nếu không muá»n ngÄn cản lpd khá»i chạy, hãy chấp nháºn tùy chá»n mặc Äá»nh."
+
--- lprng-3.8.A.orig/debian/po/de.po
+++ lprng-3.8.A/debian/po/de.po
@@ -0,0 +1,109 @@
+# translation of lprng_3.8.28-4_de.po to German
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans#
+# Developers do not need to manually edit POT or PO files.
+# Erik Schanze <mail@erikschanze.de>, 2004.
+# Erik Schanze <schanzi_@gmx.de>, 2006.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: lprng_3.8.28-4_de\n"
+"Report-Msgid-Bugs-To: csmall@debian.org\n"
+"POT-Creation-Date: 2006-08-01 21:12+1000\n"
+"PO-Revision-Date: 2006-01-03 21:58+0100\n"
+"Last-Translator: Erik Schanze <schanzi_@gmx.de>\n"
+"Language-Team: German <de@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.10.2\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "There are two lpd.conf files"
+msgstr "Es gibt die Datei lpd.conf doppelt"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid ""
+"You have a lpd.conf in the old location (/etc/lpd.conf) and the new location "
+"(/etc/lprng/lpd.conf). From lprng version 3.6.16-1 this file should be only "
+"in /etc/lprng, please check both files and remove /etc/lpd.conf"
+msgstr ""
+"Sie haben eine Datei lpd.conf an der alten Stelle (/etc/lpd.conf) und an der "
+"neuen Stelle (/etc/lprng/lpd.conf). Seit der Version 3.6.16-1 von lprng "
+"sollte diese Datei nur noch im Verzeichnis /etc/lprng liegen. Ãberprüfen Sie "
+"bitte beide Dateien und löschen Sie /etc/lpd.conf."
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "There are two lpd.perms files"
+msgstr "Es gibt die Datei lpd.perms doppelt"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid ""
+"You have a lpd.perms in the old location (/etc/lpd.perms) and the new "
+"location (/etc/lprng/lpd.perms). Since lprng version 3.6.16-1 this file "
+"should be only in /etc/lprng, please check both files and remove /etc/lpd."
+"perms"
+msgstr ""
+"Sie haben eine Datei lpd.perms an der alten Stelle (/etc/lpd.perms) und an "
+"der neuen Stelle (/etc/lprng/lpd.perms). Seit der Version 3.6.16-1 von lprng "
+"sollte diese Datei nur noch im Verzeichnis /etc/lprng liegen. Ãberprüfen Sie "
+"bitte beide Dateien und löschen Sie /etc/lpd.perms."
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Make lpr, lprm and lpq setuid root?"
+msgstr "lpr, lprm und lpq mit root-Rechten betreiben?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"For full RFC1179 compliance you need to make these programs setuid root. "
+"This is mainly so they can create a socket with a low port number. The low "
+"port number may be important if you have network printers or have adjusted /"
+"etc/lprng/lpd.perms to restrict access to non-privledged ports. For the "
+"typical printer connected locally to parallel port (and many other) scenario "
+"you can leave these programs non setuid root."
+msgstr ""
+"Zur vollen Ãbereinstimmung mit RFC1179 müssen diese Programme mit root-"
+"Rechten laufen. Hauptsächlich damit diese einen Socket mit einer geringen "
+"Portnummer anlegen können. Niedrige Portnummern können wichtig sein, wenn "
+"Sie einen Netzwerkdrucker betreiben oder den Zugang über hohe Ports in der "
+"Datei /etc/lprng/lpd.perms beschränkt haben. Für einen normalen Drucker am "
+"Parallelport und in vielen anderen Fällen brauchen diese Programme keine "
+"root-Rechte."
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Start lpd (Printer Daemon) at boot?"
+msgstr "lpd (Druckerdienst) beim Booten starten?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid ""
+"Some people for various reasons do not want to start lpd. Refusing this "
+"option means lpd will not start. Unless you know why you want lpd not to "
+"start, just accept the default."
+msgstr ""
+"Es gibt verschiedene Gründe, lpd nicht beim Booten zu starten. Wenn Sie hier "
+"ablehnen, wird lpd nicht starten. Wählen Sie die Standardeinstellung, auÃer "
+"Sie wissen, warum Sie lpd nicht starten wollen."
--- lprng-3.8.A.orig/debian/po/it.po
+++ lprng-3.8.A/debian/po/it.po
@@ -0,0 +1,98 @@
+# Italian translation of po-debconf templates for lprng.
+# Copyright (c) 2005 Software in the Public Interest
+# This file is distributed under the same license as the lprng package.
+# Luca Monducci, 2004, 2005
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: lprng 3.8.28\n"
+"Report-Msgid-Bugs-To: csmall@debian.org\n"
+"POT-Creation-Date: 2006-08-01 21:12+1000\n"
+"PO-Revision-Date: 2005-12-18 11:54+0100\n"
+"Last-Translator: Luca Monducci <luca.mo@tiscali.it>\n"
+"Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "There are two lpd.conf files"
+msgstr "Esistono due file lpd.conf"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid ""
+"You have a lpd.conf in the old location (/etc/lpd.conf) and the new location "
+"(/etc/lprng/lpd.conf). From lprng version 3.6.16-1 this file should be only "
+"in /etc/lprng, please check both files and remove /etc/lpd.conf"
+msgstr ""
+"Un file lpd.conf è presente sia nella vecchia posizione (/etc/lpd.conf) che "
+"nella nuova (/etc/lprng/lpd.conf). Dalla versione 3.6.16-1 di lprng questo "
+"file deve essere presente solo in /etc/lprng, controllare entrambi i file e "
+"rimuovere /etc/lpd.conf"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "There are two lpd.perms files"
+msgstr "Esistono due file lpd.perms"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid ""
+"You have a lpd.perms in the old location (/etc/lpd.perms) and the new "
+"location (/etc/lprng/lpd.perms). Since lprng version 3.6.16-1 this file "
+"should be only in /etc/lprng, please check both files and remove /etc/lpd."
+"perms"
+msgstr ""
+"Un file lpd.perms è presente sia nella vecchia posizione (/etc/lpd.perms) "
+"che nella nuova (/etc/lprng/lpd.perms). Dalla versione 3.6.16-1 di lprng "
+"questo file deve essere presente solo in /etc/lprng, controllare entrambi i "
+"file e rimuovere /etc/lpd.perms"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Make lpr, lprm and lpq setuid root?"
+msgstr "Usare lpr, lprm e lpq con il setuid root?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"For full RFC1179 compliance you need to make these programs setuid root. "
+"This is mainly so they can create a socket with a low port number. The low "
+"port number may be important if you have network printers or have adjusted /"
+"etc/lprng/lpd.perms to restrict access to non-privledged ports. For the "
+"typical printer connected locally to parallel port (and many other) scenario "
+"you can leave these programs non setuid root."
+msgstr ""
+"Per il rispetto completo della RFC1179 questi programmi devono usare il "
+"setuid root, questo serve essenzialmente per poter creare un socket con "
+"numero di porta basso. Il numero di porta può essere importante nel caso si "
+"abbia una stampante di rete o nel caso che modificando /etc/lprng/lpd.perms "
+"si sia vietato l'accesso alle porte non-privilegiate. Per il classico "
+"scenario (e in molti altri casi) di una stampante locale collegata con un "
+"cavo parellelo si può lasciare questi programmi senza il setuid root."
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Start lpd (Printer Daemon) at boot?"
+msgstr "Attivare lpd (demone di stampa) all'avvio?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid ""
+"Some people for various reasons do not want to start lpd. Refusing this "
+"option means lpd will not start. Unless you know why you want lpd not to "
+"start, just accept the default."
+msgstr ""
+"Alcuni amministratori, per varie ragioni, preferiscono evitare l'attivazione "
+"di lpd. Rifiutanto questa domanda lpd non verrà attivato. Se non si conosce "
+"un motivo per non volere lpd accettare la risposta predefinita."
--- lprng-3.8.A.orig/debian/po/gl.po
+++ lprng-3.8.A/debian/po/gl.po
@@ -0,0 +1,98 @@
+# Galician translation of lprng's debconf templates
+# This file is distributed under the same license as the lprng package.
+# Jacobo Tarrio <jtarrio@debian.org>, 2008.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: lprng\n"
+"Report-Msgid-Bugs-To: csmall@debian.org\n"
+"POT-Creation-Date: 2006-08-01 21:12+1000\n"
+"PO-Revision-Date: 2007-01-01 13:32+0100\n"
+"Last-Translator: Jacobo Tarrio <jtarrio@debian.org>\n"
+"Language-Team: Galician <proxecto@trasno.net>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "There are two lpd.conf files"
+msgstr "Hai dous ficheiros lpd.conf"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid ""
+"You have a lpd.conf in the old location (/etc/lpd.conf) and the new location "
+"(/etc/lprng/lpd.conf). From lprng version 3.6.16-1 this file should be only "
+"in /etc/lprng, please check both files and remove /etc/lpd.conf"
+msgstr ""
+"Ten un ficheiro lpd.conf na ubicación antiga (/etc/lpd.conf) e na ubicación "
+"nova (/etc/lprng/lpd.conf). A partires de lprng versión 3.6.16-1, este "
+"ficheiro só deberÃa estar en /etc/lprng; comprobe os dous ficheiros e "
+"elimine /etc/lpd.conf"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "There are two lpd.perms files"
+msgstr "Hai dous ficheiros lpd.perms"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid ""
+"You have a lpd.perms in the old location (/etc/lpd.perms) and the new "
+"location (/etc/lprng/lpd.perms). Since lprng version 3.6.16-1 this file "
+"should be only in /etc/lprng, please check both files and remove /etc/lpd."
+"perms"
+msgstr ""
+"Ten un ficheiro lpd.perms na ubicación antiga (/etc/lpd.perms) e na "
+"ubicación nova (/etc/lprng/lpd.perms). A partires de lprng versión 3.6.16-1, "
+"este ficheiro só deberÃa estar en /etc/lprng; comprobe os dous ficheiros e "
+"elimine /etc/lpd.perms"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Make lpr, lprm and lpq setuid root?"
+msgstr "¿Quere darlle privilexios de administrador a lpr, lprm e lpq?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"For full RFC1179 compliance you need to make these programs setuid root. "
+"This is mainly so they can create a socket with a low port number. The low "
+"port number may be important if you have network printers or have adjusted /"
+"etc/lprng/lpd.perms to restrict access to non-privledged ports. For the "
+"typical printer connected locally to parallel port (and many other) scenario "
+"you can leave these programs non setuid root."
+msgstr ""
+"Para seguir completamente a especificación RFC1179 ten que lle dar "
+"privilexios de administrador a estes programas. Isto é asà principalmente "
+"para que poidan crear un socket cun número de porto baixo. O número de porto "
+"baixo pode ser importante se ten impresoras de rede ou axustou o ficheiro /"
+"etc/lprng/lpd.perms para restrinxir o acceso aos portos non privilexiados. "
+"Para o escenario da tÃpica impresora conectada localmente ao porto paralelo "
+"(e moitos outros), pode deixar estes programas sen privilexios de "
+"administrador."
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Start lpd (Printer Daemon) at boot?"
+msgstr "¿Iniciar lpd (servizo de impresión) co ordenador?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid ""
+"Some people for various reasons do not want to start lpd. Refusing this "
+"option means lpd will not start. Unless you know why you want lpd not to "
+"start, just accept the default."
+msgstr ""
+"Hai xente que, por varios motivos, non quere iniciar lpd. Se rexeita esta "
+"opción, lpd non se ha iniciar. A menos que saiba por que quere que non se "
+"inicie lpd, acepte o valor por defecto."
--- lprng-3.8.A.orig/debian/po/pt.po
+++ lprng-3.8.A/debian/po/pt.po
@@ -0,0 +1,98 @@
+# Portuguese translation for lprng's debconf messages
+# Copyright (C) 2007 Miguel Figueiredo
+# This file is distributed under the same license as the lprng package.
+# Miguel Figueiredo <elmig@debianpt.org>, 2007.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: lprng 3.8.28dfsg.1-1\n"
+"Report-Msgid-Bugs-To: csmall@debian.org\n"
+"POT-Creation-Date: 2006-08-01 21:12+1000\n"
+"PO-Revision-Date: 2007-03-06 20:54+0000\n"
+"Last-Translator: Miguel Figueiredo <elmig@debianpt.org>\n"
+"Language-Team: Portuguese <traduz@debianpt.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "There are two lpd.conf files"
+msgstr "Existem dois ficheiros lpd.conf"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid ""
+"You have a lpd.conf in the old location (/etc/lpd.conf) and the new location "
+"(/etc/lprng/lpd.conf). From lprng version 3.6.16-1 this file should be only "
+"in /etc/lprng, please check both files and remove /etc/lpd.conf"
+msgstr ""
+"Você tem um lpd.conf no antigo local (/etc/lpf.conf) e no novo local "
+"(/etc/lprng/lpd.conf). A partir da versão 3.6.16-1 do lprng este ficheiro "
+"deve estar apenas em /etc/lprng, por favor verifique ambos os ficheiros e "
+"remova o /etc/lpd.conf."
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "There are two lpd.perms files"
+msgstr "Existem dois ficheiros lpd.perms"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid ""
+"You have a lpd.perms in the old location (/etc/lpd.perms) and the new "
+"location (/etc/lprng/lpd.perms). Since lprng version 3.6.16-1 this file "
+"should be only in /etc/lprng, please check both files and remove /etc/lpd."
+"perms"
+msgstr ""
+"Você tem um lpd.perms no antigo local (/etc/lpf.perms) e no novo local "
+"(/etc/lprng/lpd.perms). A partir da versão 3.6.16-1 do lprng este ficheiro "
+"deve estar apenas em /etc/lprng, por favor verifique ambos os ficheiros e "
+"remova o /etc/lpd.perms"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Make lpr, lprm and lpq setuid root?"
+msgstr "Fazer o lpr, lprm e lpq utilizar setuid root?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"For full RFC1179 compliance you need to make these programs setuid root. "
+"This is mainly so they can create a socket with a low port number. The low "
+"port number may be important if you have network printers or have adjusted /"
+"etc/lprng/lpd.perms to restrict access to non-privledged ports. For the "
+"typical printer connected locally to parallel port (and many other) scenario "
+"you can leave these programs non setuid root."
+msgstr ""
+"Para estar em total conformidade com o RFC1179 você tem que deixar que estes "
+"programas utilizem setuid root. Isto é principalmente para que possam criar "
+"um socket com um número baixo de porto. O número baixo de porto é importante "
+"se tiver impressoras de rede ou se ajustou o /etc/lpnrg/lpd.perms para "
+"restringir o acesso a portos não privilegiados. Para o cenário da tÃpica "
+"impressora ligada localmente à porta paralela (e muitas outras) pode deixar "
+"estes programas sem utilizarem o setuid root."
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Start lpd (Printer Daemon) at boot?"
+msgstr "Iniciar o (Daemon de Impressão) lpd no arranque?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid ""
+"Some people for various reasons do not want to start lpd. Refusing this "
+"option means lpd will not start. Unless you know why you want lpd not to "
+"start, just accept the default."
+msgstr ""
+"Algumas pessoas por várias razões não querem iniciar o lpd. Recusar esta "
+"opção significa que o lpd não irá iniciar. A menos que saiba porque quer "
+"que o lpd não inicie, por omissão aceite."
--- lprng-3.8.A.orig/debian/po/fi.po
+++ lprng-3.8.A/debian/po/fi.po
@@ -0,0 +1,62 @@
+msgid ""
+msgstr ""
+"Project-Id-Version: lprng\n"
+"Report-Msgid-Bugs-To: csmall@debian.org\n"
+"POT-Creation-Date: 2006-08-01 21:12+1000\n"
+"PO-Revision-Date: \n"
+"Last-Translator: Esko Arajärvi <edu@iki.fi>\n"
+"Language-Team: Finnish <debian-l10n-finnish@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Poedit-Language: Finnish\n"
+"X-Poedit-Country: FINLAND\n"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "There are two lpd.conf files"
+msgstr "Tiedostosta lpd.conf on kaksi versiota"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "You have a lpd.conf in the old location (/etc/lpd.conf) and the new location (/etc/lprng/lpd.conf). From lprng version 3.6.16-1 this file should be only in /etc/lprng, please check both files and remove /etc/lpd.conf"
+msgstr "Tiedosto lpd.conf on sekä vanhassa sijainnissa (/etc/lpd.conf) että uudessa sijainnissa (/etc/lprng/lpd.conf). Versiosta 3.6.16-1 alkaen tiedoston tulisi olla vain hakemistossa /etc/lprng. Tarkista molemmat tiedostot ja poista /etc/lpd.conf."
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "There are two lpd.perms files"
+msgstr "Tiedostosta lpd.perms on kaksi versiota "
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "You have a lpd.perms in the old location (/etc/lpd.perms) and the new location (/etc/lprng/lpd.perms). Since lprng version 3.6.16-1 this file should be only in /etc/lprng, please check both files and remove /etc/lpd.perms"
+msgstr "Tiedosto lpd.perms on sekä vanhassa sijainnissa (/etc/lpd.perms) että uudessa sijainnissa (/etc/lprng/lpd.perms). Versiosta 3.6.16-1 alkaen tiedoston tulisi olla vain hakemistossa /etc/lprng. Tarkista molemmat tiedostot ja poista /etc/lpd.perms."
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Make lpr, lprm and lpq setuid root?"
+msgstr "Asennetaanko lpr, lprm ja lpq asetuksella setuid root?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "For full RFC1179 compliance you need to make these programs setuid root. This is mainly so they can create a socket with a low port number. The low port number may be important if you have network printers or have adjusted /etc/lprng/lpd.perms to restrict access to non-privledged ports. For the typical printer connected locally to parallel port (and many other) scenario you can leave these programs non setuid root."
+msgstr "Täyttääkseen RFC1179:n ehdot täysin näitä ohjelmia täytyy ajaa pääkäyttäjäoikeuksilla. Tällöin ne voivat luoda pistokkeen pienellä porttinumerolla. Pieni porttinumero voi olla tärkeä, jos käytössä on verkkotulostimia tai tiedostossa /etc/lprng/lpd.perms on rajoitettu pääsyä tavallisiin portteihin. Tyypillisten rinnakkaisporttiin yhdistettyjen tulostimien (ja monien muiden) kanssa ohjelmia ei tarvitse asentaa tällä asetuksella."
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Start lpd (Printer Daemon) at boot?"
+msgstr "Käynnistetäänkö lpd (tulostustaustaohjelma) järjestelmän käynnistyessä?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Some people for various reasons do not want to start lpd. Refusing this option means lpd will not start. Unless you know why you want lpd not to start, just accept the default."
+msgstr "Erilaisista syistä johtuen ohjelmaa lpd ei aina haluta käynnistää. Jos et valitse tätä lpd ei käynnisty. Jos et tiedä miksei lpd saisi käynnistyä, voit valita oletuksen."
+
--- lprng-3.8.A.orig/debian/po/cs.po
+++ lprng-3.8.A/debian/po/cs.po
@@ -0,0 +1,103 @@
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: lprng\n"
+"Report-Msgid-Bugs-To: csmall@debian.org\n"
+"POT-Creation-Date: 2006-08-01 21:12+1000\n"
+"PO-Revision-Date: 2009-06-28 17:31+0200\n"
+"Last-Translator: Jan Outrata <outrata@upcase.inf.upol.cz>\n"
+"Language-Team: Czech <debian-l10n-czech@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "There are two lpd.conf files"
+msgstr "Existujà dva soubory lpd.conf"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid ""
+"You have a lpd.conf in the old location (/etc/lpd.conf) and the new location "
+"(/etc/lprng/lpd.conf). From lprng version 3.6.16-1 this file should be only "
+"in /etc/lprng, please check both files and remove /etc/lpd.conf"
+msgstr ""
+"Máte lpd.conf na starém mÃstÄ (/etc/lpd.conf) i na novém mÃstÄ (/etc/lprng/"
+"lpd.conf). Od lprng verze 3.6.16-1 by tento soubor mÄl být jen v /etc/lprng, "
+"zkontrolujte prosÃm oba soubory a odstraÅte /etc/lpd.conf"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "There are two lpd.perms files"
+msgstr "Existujà dva soubory lpd.perms"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid ""
+"You have a lpd.perms in the old location (/etc/lpd.perms) and the new "
+"location (/etc/lprng/lpd.perms). Since lprng version 3.6.16-1 this file "
+"should be only in /etc/lprng, please check both files and remove /etc/lpd."
+"perms"
+msgstr ""
+"Máte lpd.perms na starém mÃstÄ (/etc/lpd.perms) i na novém mÃstÄ (/etc/lprng/"
+"lpd.perms). Od lprng verze 3.6.16-1 by tento soubor mÄl být jen v /etc/"
+"lprng, zkontrolujte prosÃm oba soubory a odstraÅte /etc/lpd.perms"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Make lpr, lprm and lpq setuid root?"
+msgstr "Majà mÃt lpr, lprm a lpq nastavený SUID bit?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"For full RFC1179 compliance you need to make these programs setuid root. "
+"This is mainly so they can create a socket with a low port number. The low "
+"port number may be important if you have network printers or have adjusted /"
+"etc/lprng/lpd.perms to restrict access to non-privledged ports. For the "
+"typical printer connected locally to parallel port (and many other) scenario "
+"you can leave these programs non setuid root."
+msgstr ""
+"Pro plné vyhovÄnà normÄ RFC1179 musà mÃt tyto programy nastavený SUID bit. "
+"Je to hlavnÄ z důvodu možnosti vytvoÅit socket s nÃzkým ÄÃslem portu. NÃzké "
+"ÄÃslo portu může být důležité, pokud máte sÃÅ¥ové tiskárny nebo máte "
+"upravený /etc/lprng/lpd.perms s omezenÃm pÅÃstupu k neprivilegovaným portům. "
+"Pro typický pÅÃpad tiskárny pÅipojené lokálnÄ k paralelnÃmu portu (a mnoha "
+"dalÅ¡Ãm) tyto programy nastavený SUID bit mÃt nemusÃ."
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Start lpd (Printer Daemon) at boot?"
+msgstr "Startovat lpd (Printer Daemon - Démon tiskárny) pÅi spuÅ¡tÄnà systému?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid ""
+"Some people for various reasons do not want to start lpd. Refusing this "
+"option means lpd will not start. Unless you know why you want lpd not to "
+"start, just accept the default."
+msgstr ""
+"NÄkteÅà lidé nechtÄjà z různých důvodů lpd startovat. ZamÃtnutà této volby "
+"znamená, že se lpd nebude spouÅ¡tÄt. Pokud nevÃte, proÄ byste nechtÄli lpd "
+"spouÅ¡tÄt, jednoduÅ¡e pÅijmÄte výchozà nastavenÃ."
--- lprng-3.8.A.orig/debian/po/pt_BR.po
+++ lprng-3.8.A/debian/po/pt_BR.po
@@ -0,0 +1,101 @@
+# lprng Brazilian Portuguese translation
+# Copyright (C) 2008 lprng's PACKAGE COPYRIGHT HOLDER
+# This file is distributed under the same license as the lprng package.
+# André LuÃs Lopes <andrelop@debian.org>, 2007.
+# Eder L. Marques (frolic) <frolic@debian-ce.org>, 2008.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: lprng\n"
+"Report-Msgid-Bugs-To: csmall@debian.org\n"
+"POT-Creation-Date: 2006-08-01 21:12+1000\n"
+"PO-Revision-Date: 2008-08-20 11:20-0300\n"
+"Last-Translator: Eder L. Marques (frolic) <frolic@debian-ce.org>\n"
+"Language-Team: Brazilian Portuguese <debian-l10n-portuguese@lists.debian."
+"org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"pt_BR utf-8\n"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "There are two lpd.conf files"
+msgstr "Existem dois arquivos lpd.conf"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid ""
+"You have a lpd.conf in the old location (/etc/lpd.conf) and the new location "
+"(/etc/lprng/lpd.conf). From lprng version 3.6.16-1 this file should be only "
+"in /etc/lprng, please check both files and remove /etc/lpd.conf"
+msgstr ""
+"Você tem um arquivo lpd.conf em uma localização antiga (/etc/lpd.conf) e na "
+"nova localização (/etc/lprng/lpd.conf). A partir da versão 3.6.16-1 este "
+"arquivo deveria estar somente em /etc/lprng. Por favor, verifique ambos os "
+"arquivos e remova o /etc/lpd.conf."
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "There are two lpd.perms files"
+msgstr "Existem dois arquivos lpd.perms"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid ""
+"You have a lpd.perms in the old location (/etc/lpd.perms) and the new "
+"location (/etc/lprng/lpd.perms). Since lprng version 3.6.16-1 this file "
+"should be only in /etc/lprng, please check both files and remove /etc/lpd."
+"perms"
+msgstr ""
+"Você tem um arquivo lpd.perms em uma localização antiga (/etc/lpd.perms) e "
+"na nova localização (/etc/lprng/lpd.perms). A partir da versão 3.6.16-1 este "
+"arquivo deveria estar somente em /etc/lprng. Por favor, verifique ambos os "
+"arquivos e remova o /etc/lpd.perms."
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Make lpr, lprm and lpq setuid root?"
+msgstr "Tornar o lpr, lprm e lpq setuid root?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"For full RFC1179 compliance you need to make these programs setuid root. "
+"This is mainly so they can create a socket with a low port number. The low "
+"port number may be important if you have network printers or have adjusted /"
+"etc/lprng/lpd.perms to restrict access to non-privledged ports. For the "
+"typical printer connected locally to parallel port (and many other) scenario "
+"you can leave these programs non setuid root."
+msgstr ""
+"Para compatibilidade total com a RFC1179 você precisa tornar esses programas "
+"setuid root. Isto se deve principalmente a eles poderem criar um socket com "
+"um número de porta baixo. O número de porta baixo pode ser importante caso "
+"você possua impressoras de rede ou tenha ajustado o arquivo /etc/lprng/lpd."
+"perms para restringir o acesso a portas não privilegiadas. Para o tÃpico "
+"cenário da impressora conectada localmente à porta paralela (e muitos "
+"outros) você pode manter esses programas sem o bit setuid root habilitado."
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Start lpd (Printer Daemon) at boot?"
+msgstr "Iniciar o lpd (Daemon de Impressão) na inicialização da máquina?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid ""
+"Some people for various reasons do not want to start lpd. Refusing this "
+"option means lpd will not start. Unless you know why you want lpd not to "
+"start, just accept the default."
+msgstr ""
+"Algumas pessoas por várias razões não desejam iniciar o lpd. Recusando esta "
+"opção significa que o lpd não irá iniciar. A menos que você saiba por que "
+"quer que o lpd não inicie, apenas aceite o padrão."
--- lprng-3.8.A.orig/debian/po/es.po
+++ lprng-3.8.A/debian/po/es.po
@@ -0,0 +1,109 @@
+# lprng po-debconf translation to spanish
+# Copyright (C) 2006 Software in the Public Interest, SPI Inc.
+# This file is distributed under the same license as the lprng package.
+#
+# Changes:
+# - Initial translation
+# Javier Fernández-Sanguino, December 2006
+# - Revision
+# Ricardo Mones
+# Fernandezo Cerezal
+#
+#
+# Traductores, si no conoce el formato PO, merece la pena leer la
+# documentación de gettext, especialmente las secciones dedicadas a este
+# formato, por ejemplo ejecutando:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Equipo de traducción al español, por favor lean antes de traducir
+# los siguientes documentos:
+#
+# - El proyecto de traducción de Debian al español
+# http://www.debian.org/intl/spanish/
+# especialmente las notas y normas de traducción en
+# http://www.debian.org/intl/spanish/notas
+#
+# - La guía de traducción de po's de debconf:
+# /usr/share/doc/po-debconf/README-trans
+# o http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Si tiene dudas o consultas sobre esta traducción consulte con el último
+# traductor (campo Last-Translator) y ponga en copia a la lista de
+# traducción de Debian al español (<debian-l10n-spanish@lists.debian.org>)
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: lprng 3.8.28dfsg.1-1\n"
+"Report-Msgid-Bugs-To: csmall@debian.org\n"
+"POT-Creation-Date: 2006-08-01 21:12+1000\n"
+"PO-Revision-Date: 2007-03-17 21:28+0100\n"
+"Last-Translator: Javier Fernández-Sanguino <jfs@debian.org>\n"
+"Language-Team: Debian Spanish <debian-l10n-spanish@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-15\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "There are two lpd.conf files"
+msgstr "Hay dos ficheros lpd.conf"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid ""
+"You have a lpd.conf in the old location (/etc/lpd.conf) and the new location "
+"(/etc/lprng/lpd.conf). From lprng version 3.6.16-1 this file should be only "
+"in /etc/lprng, please check both files and remove /etc/lpd.conf"
+msgstr "Tiene un fichero lpd.conf tanto en la antigua ubicación («/etc/lpd.conf») como en la nueva («/etc/lprng/lpd.conf»). A partir de la versión 3.6.16-1 de lprng este fichero sólo debería estar en «/etc/lprng». Compruebe ambos ficheros y elimine «/etc/lpd.conf»."
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "There are two lpd.perms files"
+msgstr "Hay dos ficheros lpd.perms"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid ""
+"You have a lpd.perms in the old location (/etc/lpd.perms) and the new "
+"location (/etc/lprng/lpd.perms). Since lprng version 3.6.16-1 this file "
+"should be only in /etc/lprng, please check both files and remove /etc/lpd."
+"perms"
+msgstr "Tiene un fichero lpd.perms tanto en la antigua ubicación («/etc/lpd.perms») como en la nueva («/etc/lprng/lpd.perms»). A partir de la versión 3.6.16-1 de lprng este fichero sólo debería estar en «/etc/lprng». Compruebe ambos ficheros y elimine «/etc/lpd.perms»."
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Make lpr, lprm and lpq setuid root?"
+msgstr "¿Desea hacer que lpr, lprm y lpq se instalen con «setuid root»?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"For full RFC1179 compliance you need to make these programs setuid root. "
+"This is mainly so they can create a socket with a low port number. The low "
+"port number may be important if you have network printers or have adjusted /"
+"etc/lprng/lpd.perms to restrict access to non-privledged ports. For the "
+"typical printer connected locally to parallel port (and many other) scenario "
+"you can leave these programs non setuid root."
+msgstr "Para cumplir completamente el estándar RFC1179 debe instalar estos programas con «setuid root». Esto es necesario para que puedan crear un socket en un número de puerto bajo. Utilizar un número de puerto bajo es importante si tiene impresoras de red o si ha configurado «/etc/lprng/lpd.perms» para restringir el acceso a puertos no privilegiados. En el caso de la típica impresora conectada localmente al puerto paralelo (y para muchos otros) puede hacer que estos programas no se instalen con «setuid root»."
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Start lpd (Printer Daemon) at boot?"
+msgstr "¿Desea arrancar lpd (Demonio de impresora) en el inicio del sistema?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid ""
+"Some people for various reasons do not want to start lpd. Refusing this "
+"option means lpd will not start. Unless you know why you want lpd not to "
+"start, just accept the default."
+msgstr "Algunas personas no desean, por distintos motivos, que se arranque lpd. Lpd no se arrancará si rechaza esta opción. Elija el valor predeterminado a no ser que sepa por qué no quiere arrancar lpd."
--- lprng-3.8.A.orig/debian/po/nl.po
+++ lprng-3.8.A/debian/po/nl.po
@@ -0,0 +1,113 @@
+# translation of lprng 3.8.28-4_templates.po to Dutch
+# This file is distributed under the same license as the lprng package.
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+# Luk Claes <luk.claes(AT)ugent(DOT)be>, 2004
+# Kurt De Bree <kdebree(AT)telenet(DOT)be>, 2006
+# This is an unofficial translation
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: lprng 3.8.28-4\n"
+"Report-Msgid-Bugs-To: csmall@debian.org\n"
+"POT-Creation-Date: 2006-08-01 21:12+1000\n"
+"PO-Revision-Date: 2006-07-05 09:28+0100\n"
+"Last-Translator: Kurt De Bree <kdebree(AT)telenet(DOT)be>\n"
+"Language-Team: Debian l10n Dutch <debian-l10n-dutch@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=iso-8859-15\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "There are two lpd.conf files"
+msgstr "Er zijn twee lpd.conf-bestanden"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid ""
+"You have a lpd.conf in the old location (/etc/lpd.conf) and the new location "
+"(/etc/lprng/lpd.conf). From lprng version 3.6.16-1 this file should be only "
+"in /etc/lprng, please check both files and remove /etc/lpd.conf"
+msgstr ""
+"U hebt een lpd.conf in de oude locatie (/etc/lpd.conf) en de nieuwe locatie "
+"(/etc/lprng/lpd.conf). Sinds lprng versie 3.6-16-1 dient dit bestand enkel "
+"in /etc/lprng aanwezig te zijn; gelieve beide bestanden te controleren en /"
+"etc/lpd.conf te verwijderen."
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "There are two lpd.perms files"
+msgstr "Er zijn twee lpd.perms-bestanden"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid ""
+"You have a lpd.perms in the old location (/etc/lpd.perms) and the new "
+"location (/etc/lprng/lpd.perms). Since lprng version 3.6.16-1 this file "
+"should be only in /etc/lprng, please check both files and remove /etc/lpd."
+"perms"
+msgstr ""
+"U hebt een lpd.perms in de oude locatie (/etc/lpd.perms) en de nieuwe "
+"locatie (/etc/lprng/lpd.perms). Sinds lprng versie 3.6-16-1 dient dit "
+"bestand enkel in /etc/lprng aanwezig te zijn; gelieve beide bestanden te "
+"controleren en /etc/lpd.perms te verwijderen."
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Make lpr, lprm and lpq setuid root?"
+msgstr "Wilt u lpr, lprm en lpq setuid root maken?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"For full RFC1179 compliance you need to make these programs setuid root. "
+"This is mainly so they can create a socket with a low port number. The low "
+"port number may be important if you have network printers or have adjusted /"
+"etc/lprng/lpd.perms to restrict access to non-privledged ports. For the "
+"typical printer connected locally to parallel port (and many other) scenario "
+"you can leave these programs non setuid root."
+msgstr ""
+"Om RFC1179 volledig te volgen dient u deze programma's setuid root te maken. "
+"Dit is hoofdzakelijk omdat er dan een socket met een laag poortnummer kan "
+"worden aangemaakt. Het lage poortnummer kan belangrijk zijn als u "
+"netwerkprinters heeft of /etc/lprng/lpd.perms heeft aangepast om toegang te "
+"beperken tot niet-geprivilegeerde poorten. Voor het typische scenario (en "
+"vele anderen) waarin de printer is verbonden met de parallelle poort kunt u "
+"deze programma's niet-setuid root laten."
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Start lpd (Printer Daemon) at boot?"
+msgstr "Wilt u lpd activeren bij het opstarten van het systeem?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid ""
+"Some people for various reasons do not want to start lpd. Refusing this "
+"option means lpd will not start. Unless you know why you want lpd not to "
+"start, just accept the default."
+msgstr ""
+"Sommige mensen willen om verschillende redenen de printer achtergronddienst "
+"'lpd' niet starten. Deze optie weigeren betekent dat lpd niet zal starten. "
+"Tenzij u weet waarom lpd niet te starten, aanvaardt u best de standaard "
+"keuze."
--- lprng-3.8.A.orig/debian/po/fr.po
+++ lprng-3.8.A/debian/po/fr.po
@@ -0,0 +1,110 @@
+# translation of fr.po to French
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+# Christian Perrier <bubulle@debian.org>, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: fr\n"
+"Report-Msgid-Bugs-To: csmall@debian.org\n"
+"POT-Creation-Date: 2006-08-01 21:12+1000\n"
+"PO-Revision-Date: 2005-11-03 17:44+0100\n"
+"Last-Translator: Christian Perrier <bubulle@debian.org>\n"
+"Language-Team: French <debian-l10n-french@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-15\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.10.2\n"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "There are two lpd.conf files"
+msgstr "Deux fichiers lpd.conf ont été trouvés"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid ""
+"You have a lpd.conf in the old location (/etc/lpd.conf) and the new location "
+"(/etc/lprng/lpd.conf). From lprng version 3.6.16-1 this file should be only "
+"in /etc/lprng, please check both files and remove /etc/lpd.conf"
+msgstr ""
+"Un fichier lpd.conf a été trouvé à l'ancien emplacement (dans /etc) et un "
+"autre au nouvel emplacement (/etc/lprng). Depuis la version 3.6.16-1 de "
+"lprng, le fichier utilisé est celui de /etc/lprng : veuillez donc vérifier "
+"le contenu des deux fichiers, puis effacer /etc/lpd.conf."
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "There are two lpd.perms files"
+msgstr "Deux fichiers lpd.perms ont été trouvés"
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid ""
+"You have a lpd.perms in the old location (/etc/lpd.perms) and the new "
+"location (/etc/lprng/lpd.perms). Since lprng version 3.6.16-1 this file "
+"should be only in /etc/lprng, please check both files and remove /etc/lpd."
+"perms"
+msgstr ""
+"Un fichier lpd.perms a été trouvé à l'ancien emplacement (dans /etc) et un "
+"autre au nouvel emplacement (/etc/lprng). Depuis la version 3.6.16-1 de "
+"lprng, le fichier utilisé est celui de /etc/lprng : veuillez donc vérifier "
+"le contenu des deux fichiers, puis effacer /etc/lpd.perms."
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Make lpr, lprm and lpq setuid root?"
+msgstr "Lpr, lprm et lpq doivent-ils être « setuid root » ?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"For full RFC1179 compliance you need to make these programs setuid root. "
+"This is mainly so they can create a socket with a low port number. The low "
+"port number may be important if you have network printers or have adjusted /"
+"etc/lprng/lpd.perms to restrict access to non-privledged ports. For the "
+"typical printer connected locally to parallel port (and many other) scenario "
+"you can leave these programs non setuid root."
+msgstr ""
+"Pour un respect complet de la RFC1179, ces programmes doivent s'exécuter "
+"avec les privilèges du super-utilisateur. C'est pour l'essentiel nécessaire "
+"à la création d'un « socket » sur un port de numéro inférieur à 1024. Cela "
+"peut être important si vous utilisez des imprimantes en réseau ou si vous "
+"avez modifié /etc/lprng/lpd.perms pour restreindre l'accès aux ports non "
+"privilégiés. Dans le cas d'une imprimante classiquement connectée sur le "
+"port parallèle (et beaucoup d'autres cas), il n'est pas indispensable que "
+"ces programmes s'exécutent avec les privilèges du super-utilisateur."
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Start lpd (Printer Daemon) at boot?"
+msgstr "Faut-il lancer lpd (gestionnaire d'imprimantes) au démarrage ?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid ""
+"Some people for various reasons do not want to start lpd. Refusing this "
+"option means lpd will not start. Unless you know why you want lpd not to "
+"start, just accept the default."
+msgstr ""
+"Certains administrateurs, pour des raisons diverses, préfèrent éviter de "
+"lancer lpd. En refusant ici, lpd ne démarrera pas. Vous devriez accepter à "
+"moins d'avoir une raison solide pour ne pas vouloir démarrer lpd."
--- lprng-3.8.A.orig/debian/po/templates.pot
+++ lprng-3.8.A/debian/po/templates.pot
@@ -0,0 +1,81 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: csmall@debian.org\n"
+"POT-Creation-Date: 2006-08-01 21:12+1000\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid "There are two lpd.conf files"
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../templates:1001
+msgid ""
+"You have a lpd.conf in the old location (/etc/lpd.conf) and the new location "
+"(/etc/lprng/lpd.conf). From lprng version 3.6.16-1 this file should be only "
+"in /etc/lprng, please check both files and remove /etc/lpd.conf"
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid "There are two lpd.perms files"
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../templates:2001
+msgid ""
+"You have a lpd.perms in the old location (/etc/lpd.perms) and the new "
+"location (/etc/lprng/lpd.perms). Since lprng version 3.6.16-1 this file "
+"should be only in /etc/lprng, please check both files and remove /etc/lpd."
+"perms"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Make lpr, lprm and lpq setuid root?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"For full RFC1179 compliance you need to make these programs setuid root. "
+"This is mainly so they can create a socket with a low port number. The low "
+"port number may be important if you have network printers or have adjusted /"
+"etc/lprng/lpd.perms to restrict access to non-privledged ports. For the "
+"typical printer connected locally to parallel port (and many other) scenario "
+"you can leave these programs non setuid root."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid "Start lpd (Printer Daemon) at boot?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../templates:4001
+msgid ""
+"Some people for various reasons do not want to start lpd. Refusing this "
+"option means lpd will not start. Unless you know why you want lpd not to "
+"start, just accept the default."
+msgstr ""
![[patchlogo]](http://patch-tracker.debian.org/static/img/swirlpatch.png)