--- gsmlib-1.10.orig/po/cat-id-tbl.c +++ gsmlib-1.10/po/cat-id-tbl.c @@ -1,435 +0,0 @@ -/* Automatically generated by po2tbl.sed from gsmlib.pot. */ - -#if HAVE_CONFIG_H -# include -#endif - -#include "libgettext.h" - -const struct _msg_ent _msg_tbl[] = { - {"", 1}, - {"could not execute '%s'", 2}, - {"error writing to '%s'", 3}, - {"error when calling opendir('%s')(errno: %d/%s)", 4}, - {"count not open SMS spool file %s", 5}, - {": version %s [compiled %s]", 6}, - {"\ -: [-a action][-b baudrate][-C sca][-d device][-f][-h][-I init string]\n\ - [-s spool dir][-t][-v]{sms_type}", 7}, - {"\ - -a, --action the action to execute when an SMS arrives\n\ - (SMS is send to stdin of action)", 8}, - {" -b, --baudrate baudrate to use for device (default: 38400)", 9}, - {" -c, --concatenate start ID for concatenated SMS messages", 10}, - {" -C, --sca SMS service centre address", 11}, - {" -d, --device sets the device to connect to", 12}, - {" -D, --direct enable direct routing of SMSs", 13}, - {" -f, --flush flush SMS from store", 14}, - {" -h, --help prints this message", 15}, - {" -I, --init device AT init sequence", 16}, - {" -r, --requeststat request SMS status report", 17}, - {" -s, --spool spool directory for outgoing SMS", 18}, - {"\ - -t, --store name of SMS store to use for flush\n\ - and/or temporary SMS storage", 19}, - {" -v, --version prints version and exits", 20}, - {" -X, --xonxoff switch on software handshake", 21}, - {" sms_type may be any combination of", 22}, - {" sms, no_sms controls reception of normal SMS", 23}, - {" cb, no_cb controls reception of cell broadcast messages", 24}, - {" stat, no_stat controls reception of status reports", 25}, - {" default is \"sms cb stat\"", 26}, - {"If no action is given, the SMS is printed to stdout", 27}, - {"unknown option", 28}, - {"error when calling sigaction() (errno: %d/%s)", 29}, - {"store name must be given for flush option", 30}, - {"Type of message: ", 31}, - {"SMS message\n", 32}, - {"submit report message\n", 33}, - {"status report message\n", 34}, - {"cell broadcast message\n", 35}, - {"[ERROR]: ", 36}, - {"(try setting sms_type, please refer to gsmsmsd manpage)", 37}, - {"\ -: [-b baudrate][-c concatenatedID][-C sca][-d device][-h][-I init string]\n\ - [-t][-v][-X] phonenumber [text]", 38}, - {" -c, --concatenate ID for concatenated SMS messages", 39}, - {" -d, --device sets the destination device to connect to", 40}, - {"\ - -t, --test convert text to GSM alphabet and vice\n\ - versa, no SMS message is sent", 41}, - {" phonenumber recipient's phone number", 42}, - {"\ - text optional text of the SMS message\n\ - if omitted: read from stdin", 43}, - {"phone number and text missing", 44}, - {"more than two parameters given", 45}, - {"text is larger than 160 characters", 46}, - {"inserting '%s' tel# %s", 47}, - {" (index #%d)", 48}, - {"updating '%s' tel# %s to new tel# %s", 49}, - {"updating '%s' tel# %s to new tel# %s(index %d)", 50}, - {"deleting '%s' tel# %s", 51}, - {"\ -: [-b baudrate][-c][-d device or file][-h][-I init string]\n\ - [-p phonebook name][-s device or file][-t charset][-v][-V][-y][-X]", 52}, - {" -c, --copy copy source entries to destination", 53}, - {"\ - -d, --destination sets the destination device to connect \n\ - to, or the file to write", 54}, - {" -D, --destination-backend sets the destination backend", 55}, - {" -i, --index takes index positions into account", 56}, - {" -p, --phonebook name of phonebook to use", 57}, - {"\ - -s, --source sets the source device to connect to,\n\ - or the file to read", 58}, - {"\ - -t, --charset sets the character set to use for\n\ - phonebook entries", 59}, - {" -S, --source-backend sets the source backend", 60}, - {" -V, --verbose print detailed progress messages", 61}, - {"\ - -y, --synchronize synchronize destination with source\n\ - entries (destination is overwritten)\n\ - (see gsmpb(1) for details)", 62}, - {"both source and destination must be given", 63}, - {"phonebook name must be given", 64}, - {"\ -text '%s' is too large to fit into destination (maximum size %d characters)", 65}, - {"\ -phone number '%s' is too large to fit into destination (maximum size %d \ -characters)", 66}, - {"active ", 67}, - {"inactive ", 68}, - {"number: ", 69}, - {" subaddr: ", 70}, - {" time: ", 71}, - {" Manufacturer: ", 72}, - {" Model: ", 73}, - {" Revision: ", 74}, - {" Serial Number: ", 75}, - {" Functionality Level: ", 76}, - {"unsupported", 77}, - {"> Status: ", 78}, - {"unknown", 79}, - {"current", 80}, - {"available", 81}, - {"forbidden", 82}, - {" Long name: '", 83}, - {" Short name: '", 84}, - {" Numeric name: ", 85}, - {" Mode: ", 86}, - {"automatic", 87}, - {"manual", 88}, - {"deregister", 89}, - {"manual/automatic", 90}, - {" Voice", 91}, - {" unknown", 92}, - {" Data", 93}, - {" Fax", 94}, - {"on", 95}, - {"off", 96}, - {"UnconditionalReason", 97}, - {"MobileBusyReason", 98}, - {"NoReplyReason", 99}, - {"NotReachableReason", 100}, - {"0 ME is powered by the battery", 101}, - {"1 ME has a battery connected, but is not powered by it", 102}, - {"2 ME does not have a battery connected", 103}, - {"3 Recognized power fault, calls inhibited", 104}, - {"unknown facility class parameter '%c'", 105}, - {"not enough parameters, minimum number of parameters is %d", 106}, - {"too many parameters, maximum number of parameters is %d", 107}, - {"\ -: [-b baudrate][-d device][-h][-I init string][-o operation]\n\ - [-v][-X]{parameters}", 108}, - {"\ - -o, --operation operation to perform on the mobile \n\ - phone with the specified parameters", 109}, - {"\ - parameters parameters to use for the operation\n\ - (if an operation is given) or\n\ - a specification which kind of\n\ - information to read from the mobile phone", 110}, - {"\ -Refer to gsmctl(1) for details on the available parameters and operations.", 111}, - {"unknown information parameter '%s'", 112}, - {"unknown opmode parameter '%s'", 113}, - {"unknown forward reason parameter '%s'", 114}, - {"unknown forward mode parameter '%s'", 115}, - {"unknown operation '%s'", 116}, - {"inserting entry #%d from source into destination", 117}, - {"incompatible options '%c' and '%c'", 118}, - {"\ -: [-a][-b baudrate][-c][-C sca][-d device or file]\n\ - [-h][-I init string][-k][-l][-s device or file][-t SMS store name]\n\ - [-v][-V][-x][-X]{indices}|[phonenumber text]", 119}, - {"\ - -a, --add add new SMS submit message\n\ - (phonenumber and text) to destination", 120}, - {"\ - -c, --copy copy source entries to destination\n\ - (if indices are given, copy only these entries)", 121}, - {"\ - -d, --destination sets the destination device to\n\ - connect to, or the file to write to", 122}, - {"\ - -k, --backup backup new entries to destination\n\ - (if indices are given, copy only these entries)", 123}, - {" -l, --list list source to stdout", 124}, - {" -t, --store name of SMS store to use", 125}, - {" -x, --delete delete entries denoted by indices", 126}, - {"no operation option given", 127}, - {"both source and destination required", 128}, - {"destination must not be given", 129}, - {"source required", 130}, - {"source must not be given", 131}, - {"destination required", 132}, - {"expected number, got '%s'", 133}, - {"not enough parameters given", 134}, - {"unexpected parameters", 135}, - {"store name must be given", 136}, - {"no index '%s' in source", 137}, - {"index #%d", 138}, - {"inserting new entry into destination", 139}, - {"deleting entry #%d from destination", 140}, - {"no index '%s' in destination", 141}, - {"unspecified ME/TA error", 142}, - {"ME/TA error '", 143}, - {"(code %s)", 144}, - {"ME/TA error '' (code not known)", 145}, - {"unexpected response '%s' when sending 'AT%s'", 146}, - {"unexpected character in PDU handshake", 147}, - {"phone failure", 148}, - {"no connection to phone", 149}, - {"phone adaptor link reserved", 150}, - {"operation not allowed", 151}, - {"operation not supported", 152}, - {"ph SIM PIN required", 153}, - {"SIM not inserted", 154}, - {"SIM PIN required", 155}, - {"SIM PUK required", 156}, - {"SIM failure", 157}, - {"SIM busy", 158}, - {"SIM wrong", 159}, - {"incorrect password", 160}, - {"SIM PIN2 required", 161}, - {"SIM PUK2 required", 162}, - {"memory full", 163}, - {"invalid index", 164}, - {"not found", 165}, - {"memory failure", 166}, - {"text string too long", 167}, - {"invalid characters in text string", 168}, - {"dial string too long", 169}, - {"invalid characters in dial string", 170}, - {"no network service", 171}, - {"network timeout", 172}, - {"invalid ME error %d", 173}, - {"Unassigned (unallocated) number", 174}, - {"Operator determined barring", 175}, - {"Call barred", 176}, - {"Network failure", 177}, - {"Short message transfer rejected", 178}, - {"Congestion", 179}, - {"Destination out of service", 180}, - {"Unidentified subscriber", 181}, - {"Facility rejected", 182}, - {"Unknown subscriber", 183}, - {"Network out of order", 184}, - {"Temporary failure", 185}, - {"Resources unavailable, unspecified", 186}, - {"Requested facility not subscribed", 187}, - {"Requested facility not implemented", 188}, - {"Invalid Transaction Identifier", 189}, - {"Semantically incorrect message", 190}, - {"Invalid mandatory information", 191}, - {"Message type non-existent or not implemented", 192}, - {"Message not compatible with short message protocol state", 193}, - {"Information element non-existent or not implemented", 194}, - {"Protocol error, unspecified", 195}, - {"Interworking, unspecified", 196}, - {"Telematic interworking not supported", 197}, - {"Short message Type 0 not supported", 198}, - {"Cannot replace short message", 199}, - {"Unspecified TP-PID error", 200}, - {"Data coding scheme (alphabet) not supported", 201}, - {"Message class not supported", 202}, - {"Unspecifiec TP-DCS error", 203}, - {"Command cannot be actioned", 204}, - {"Command unsupported", 205}, - {"Unspecified TP-Command error", 206}, - {"TPDU not supported", 207}, - {"SC busy", 208}, - {"No SC subscription", 209}, - {"SC system failure", 210}, - {"Invalid SME address", 211}, - {"Destination SME barred", 212}, - {"SM Rejected-Duplicated SM", 213}, - {"SIM SMS storage full", 214}, - {"No SMS storage capability in SIM", 215}, - {"Error in MS", 216}, - {"Memory Capacity Exceed", 217}, - {"Unspecified error cause", 218}, - {"ME failure", 219}, - {"SMS service of ME reserved", 220}, - {"invalid PDU mode parameter", 221}, - {"invalid text mode parameter", 222}, - {"PH-SIM PIN required", 223}, - {"invalid memory index", 224}, - {"SMSC address unknown", 225}, - {"no +CNMA acknowledgement expected", 226}, - {"unknown error", 227}, - {"invalid SMS error %d", 228}, - {"Short message received by the SME", 229}, - {"\ -Short message forwarded by the SC to the SME but the SC is unable to confirm \ -delivery", 230}, - {"Short message replaced by the SC", 231}, - {"reserved", 232}, - {"SME busy", 233}, - {"No response from SME", 234}, - {"Service rejected", 235}, - {"Quality of service not available", 236}, - {"Error in SME", 237}, - {" (Temporary error, SC is not making any more transfer attempts)", 238}, - {" (Temporary error, SC still trying to transfer SM)", 239}, - {"Remote Procedure Error", 240}, - {"Incompatible destination", 241}, - {"Connection rejected by SME", 242}, - {"Not obtainable", 243}, - {"No interworking available", 244}, - {"SM validity period expired", 245}, - {"SM deleted by originating SME", 246}, - {"SM deleted by SC administration", 247}, - {"SM does not exit", 248}, - {" (Permanent Error, SC is not making any more transfer attempts)", 249}, - {"unexpected number format %d", 250}, - {"unexpected unsolicited event '%s'", 251}, - {"unable to set operator", 252}, - {"call forward time must be in the range 0..30", 253}, - {"Functionality Level commands not supported by ME", 254}, - {"Requested Functionality Level out of range", 255}, - {"unsupported alphabet for SMS", 256}, - {"SMS text is larger than allowed", 257}, - {"not more than 255 concatenated SMSs allowed", 258}, - {"only serviceLevel 0 or 1 supported", 259}, - {"cannot route SMS messages to TE", 260}, - {"cannot route cell broadcast messages to TE", 261}, - {"cannot route status reports messages to TE", 262}, - {"cannot route status report messages to TE", 263}, - {"expected parameter", 264}, - {"expected '\"'", 265}, - {"expected number", 266}, - {"unexpected end of string '%s'", 267}, - {" (at position %d of string '%s')", 268}, - {"expected '%c'", 269}, - {"expected ')' or ','", 270}, - {"expected ')', ',' or '-'", 271}, - {"range of the form a-b-c not allowed", 272}, - {"range of the form a- no allowed", 273}, - {"expected comma", 274}, - {"expected end of line", 275}, - {"\ -length of text '%s' exceeds maximum text length (%d characters) of phonebook \ -'%s'", 276}, - {"\ -length of telephone number '%s' exceeds maximum telephone number length (%d \ -characters) of phonebook '%s'", 277}, - {"phonebook full", 278}, - {"attempt to overwrite phonebook entry", 279}, - {"SIM card changed while accessing phonebook", 280}, - {"unhandled SMS TPDU type", 281}, - {"can only send SMS-SUBMIT and SMS-COMMAND TPDUs", 282}, - {"no device given for sending SMS", 283}, - {"Message type: SMS-DELIVER", 284}, - {"SC address: '", 285}, - {"More messages to send: ", 286}, - {"Reply path: ", 287}, - {"User data header indicator: ", 288}, - {"Status report indication: ", 289}, - {"Originating address: '", 290}, - {"Protocol identifier: 0x", 291}, - {"Data coding scheme: ", 292}, - {"SC timestamp: ", 293}, - {"User data length: ", 294}, - {"User data header: 0x", 295}, - {"User data: '", 296}, - {"Message type: SMS-SUBMIT", 297}, - {"Reject duplicates: ", 298}, - {"Validity period format: ", 299}, - {"not present", 300}, - {"relative", 301}, - {"absolute", 302}, - {"Status report request: ", 303}, - {"Message reference: ", 304}, - {"Destination address: '", 305}, - {"Validity period: ", 306}, - {"Message type: SMS-STATUS-REPORT", 307}, - {"Status report qualifier: ", 308}, - {"Recipient address: '", 309}, - {"Discharge time: ", 310}, - {"Status: 0x", 311}, - {"Message type: SMS-COMMAND", 312}, - {"Command type: 0x", 313}, - {"Message number: ", 314}, - {"Command data length: ", 315}, - {"Command data: '", 316}, - {"Message type: SMS-DELIVER-REPORT", 317}, - {"Protocol identifier present: ", 318}, - {"Data coding scheme present: ", 319}, - {"User data length present: ", 320}, - {"Message type: SMS-SUBMIT-REPORT", 321}, - {" minutes", 322}, - {" days", 323}, - {" weeks", 324}, - {"compressed ", 325}, - {"voicemail message waiting", 326}, - {"fax message waiting", 327}, - {"electronic mail message waiting", 328}, - {"other message waiting", 329}, - {"default alphabet", 330}, - {"8-bit alphabet", 331}, - {"16-bit alphabet", 332}, - {"reserved alphabet", 333}, - {"bad hexadecimal PDU format", 334}, - {"premature end of PDU", 335}, - {"unknown time period format", 336}, - {"interrupted when reading from TA", 337}, - {"reading from TA", 338}, - {"timeout when reading from TA", 339}, - {"opening device '%s'", 340}, - {"getting file status flags failed", 341}, - {"switching of non-blocking mode failed", 342}, - {"clearing DTR failed", 343}, - {"setting DTR failed", 344}, - {"tcgetattr device '%s'", 345}, - {"tcsetattr device '%s'", 346}, - {"reset modem failed '%s'", 347}, - {"interrupted when writing to TA", 348}, - {"writing to TA", 349}, - {"timeout when writing to TA", 350}, - {"unknown baudrate '%s'", 351}, - {"error when calling stat('%s') (errno: %d/%s)", 352}, - {"file '%s' is neither file nor character device", 353}, - {"maxmimum number of symbolic links exceeded", 354}, - {"error renaming '%s' to '%s'", 355}, - {"text '%s' contains illegal character '\"'", 356}, - {"illegal character in telephone number '%s'", 357}, - {"error reading from file '%s", 358}, - {"entry '%s' lacks index", 359}, - {"line '%s' has invalid format", 360}, - {"error opening file '%s' for writing", 361}, - {"", 362}, - {"error writing to file '%s'", 363}, - {"attempt to change phonebook read from ", 364}, - {"cannot open file '%s'", 365}, - {"", 366}, - {"indices must be unique in phonebook", 367}, - {"error reading from file '%s'", 368}, - {"file '%s' has wrong version", 369}, - {"corrupt SMS store file '%s'", 370}, - {"attempt to change SMS store read from ", 371}, -}; - -int _msg_tbl_length = 371;