--- set6x86-1.5.orig/set6x86.8
+++ set6x86-1.5/set6x86.8
@@ -0,0 +1,49 @@
+.TH SET6X86 8 "set6x86 version 1-5"
+.SH NAME
+set6x86, get6x86 \- access Cyrix control registers
+.SH SYNOPSIS
+.B set6x86
+[
+.I -hpsc 
+] 
+.I register_index
+data
+.SH DESCRIPTION
+This utility program allows access to the special control
+registers of the Cyrix 6x86 processors.  This initial manpage
+is intended to satisfy the lintian requirements of a Debian
+package and will be improved after the other serious issues
+are cleaned up.
+.SH PARAMETERS
+.B register_index 
+An index to the specified Cyrix 6x86 config register in
+decimal (e.g. '24'), hex ('0x18') or octal ('030').
+.TP
+.B data 
+The data to program into the specified register (dec|hex|oct)
+(or the bitmask for the -s' (set) or -c' (clear) options).
+.SH OPTIONS
+.B set6x86 accepts the following options:
+
+.TP
+.B \-c
+The data is a bitmask for clearing bits in the register.
+.TP
+.B \-h
+The usage information is printed.
+.TP
+.B \-p
+The output is pipeable (in hex format).  Only the contents
+of the register is output.
+.TP
+.B \-B
+We now check /proc/cpuinfo to make sure it is a Cyrix cpu.
+This option bypasses the check.  It has only been tested on
+a MediaGX chip and expects the vender id to start with "Cyrix".
+This option allows setting other chips without that string.
+.TP
+.B \-s
+The data is a bitmask for setting bits in the register.
+.SH "SEE ALSO"
+.I 6x86_reg (8)
+.I rc.cyrix (8)