--- kst-1.7.0.orig/po/rw/Makefile.in
+++ kst-1.7.0/po/rw/Makefile.in
@@ -1,9 +1,10 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
# KDE tags expanded automatically by am_edit - $Revision: 483858 $
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -14,15 +15,12 @@
# PARTICULAR PURPOSE.
@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ../..
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
@@ -48,21 +46,29 @@
CONFIG_HEADER = $(top_builddir)/config.h \
$(top_builddir)/kst/src/libkst/ksttimers.h
CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
#>- html-recursive info-recursive install-data-recursive \
-#>- install-exec-recursive install-info-recursive \
-#>- install-recursive installcheck-recursive installdirs-recursive \
-#>- pdf-recursive ps-recursive uninstall-info-recursive \
-#>- uninstall-recursive
-#>+ 6
+#>- install-dvi-recursive install-exec-recursive \
+#>- install-html-recursive install-info-recursive \
+#>- install-pdf-recursive install-ps-recursive install-recursive \
+#>- installcheck-recursive installdirs-recursive pdf-recursive \
+#>- ps-recursive uninstall-recursive
+#>+ 7
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
- install-exec-recursive install-info-recursive \
- install-recursive installcheck-recursive installdirs-recursive \
- pdf-recursive ps-recursive uninstall-info-recursive \
- uninstall-recursive nmcheck-recursive bcheck-recursive
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ distdir
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
@@ -71,9 +77,32 @@
#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
#>+ 1
DISTFILES = $(GMOFILES) $(POFILES) $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
ARTSCCONFIG = @ARTSCCONFIG@
@@ -106,6 +135,7 @@
DOXYGEN = @DOXYGEN@
DOXYGEN_PROJECT_NAME = @DOXYGEN_PROJECT_NAME@
DOXYGEN_PROJECT_NUMBER = @DOXYGEN_PROJECT_NUMBER@
+DSYMUTIL = @DSYMUTIL@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
@@ -118,8 +148,10 @@
FITSIO_LIBS = @FITSIO_LIBS@
FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@
GMSGFMT = @GMSGFMT@
+GREP = @GREP@
GSL_LIBS = @GSL_LIBS@
HAVE_GCC_VISIBILITY = @HAVE_GCC_VISIBILITY@
+INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -207,6 +239,7 @@
MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
MCOPIDL = @MCOPIDL@
MEINPROC = @MEINPROC@
+MKDIR_P = @MKDIR_P@
MOC = @MOC@
MSGFMT = @MSGFMT@
MUPARSER_LIBS = @MUPARSER_LIBS@
@@ -214,6 +247,7 @@
NADLIBS = @NADLIBS@
NETCDFINCLUDES = @NETCDFINCLUDES@
NETCDFLIBS = @NETCDFLIBS@
+NMEDIT = @NMEDIT@
NOOPT_CFLAGS = @NOOPT_CFLAGS@
NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@
OBJEXT = @OBJEXT@
@@ -222,6 +256,7 @@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
@@ -233,6 +268,7 @@
QT_INCLUDES = @QT_INCLUDES@
QT_LDFLAGS = @QT_LDFLAGS@
RANLIB = @RANLIB@
+SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
@@ -249,6 +285,7 @@
VERSION = @VERSION@
WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@
XGETTEXT = @XGETTEXT@
+XMKMF = @XMKMF@
XMLLINT = @XMLLINT@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_INCLUDES = @X_INCLUDES@
@@ -256,18 +293,16 @@
X_PRE_LIBS = @X_PRE_LIBS@
X_RPATH = @X_RPATH@
YACC = @YACC@
-ac_ct_AR = @ac_ct_AR@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
all_includes = @all_includes@
all_libraries = @all_libraries@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -279,57 +314,18 @@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
+builddir = @builddir@
datadir = @datadir@
-doc_SUBDIR_included_FALSE = @doc_SUBDIR_included_FALSE@
-doc_SUBDIR_included_TRUE = @doc_SUBDIR_included_TRUE@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
-include_ARTS_FALSE = @include_ARTS_FALSE@
-include_ARTS_TRUE = @include_ARTS_TRUE@
-include_cdf_FALSE = @include_cdf_FALSE@
-include_cdf_TRUE = @include_cdf_TRUE@
-include_convolution_plugins_FALSE = @include_convolution_plugins_FALSE@
-include_convolution_plugins_TRUE = @include_convolution_plugins_TRUE@
-include_correlation_plugins_FALSE = @include_correlation_plugins_FALSE@
-include_correlation_plugins_TRUE = @include_correlation_plugins_TRUE@
-include_dmc_FALSE = @include_dmc_FALSE@
-include_dmc_TRUE = @include_dmc_TRUE@
-include_fits_plugins_FALSE = @include_fits_plugins_FALSE@
-include_fits_plugins_TRUE = @include_fits_plugins_TRUE@
-include_fitsio_datasource_FALSE = @include_fitsio_datasource_FALSE@
-include_fitsio_datasource_TRUE = @include_fitsio_datasource_TRUE@
-include_fitsnonlinear_plugins_FALSE = @include_fitsnonlinear_plugins_FALSE@
-include_fitsnonlinear_plugins_TRUE = @include_fitsnonlinear_plugins_TRUE@
-include_interpolations_plugins_FALSE = @include_interpolations_plugins_FALSE@
-include_interpolations_plugins_TRUE = @include_interpolations_plugins_TRUE@
-include_kjse_internal_FALSE = @include_kjse_internal_FALSE@
-include_kjse_internal_TRUE = @include_kjse_internal_TRUE@
-include_kstcmd_FALSE = @include_kstcmd_FALSE@
-include_kstcmd_TRUE = @include_kstcmd_TRUE@
-include_libkstkmdi_FALSE = @include_libkstkmdi_FALSE@
-include_libkstkmdi_TRUE = @include_libkstkmdi_TRUE@
-include_linux_FALSE = @include_linux_FALSE@
-include_linux_TRUE = @include_linux_TRUE@
-include_muparser_dependencies_FALSE = @include_muparser_dependencies_FALSE@
-include_muparser_dependencies_TRUE = @include_muparser_dependencies_TRUE@
-include_nad_FALSE = @include_nad_FALSE@
-include_nad_TRUE = @include_nad_TRUE@
-include_netcdf_FALSE = @include_netcdf_FALSE@
-include_netcdf_TRUE = @include_netcdf_TRUE@
-include_noise_plugins_FALSE = @include_noise_plugins_FALSE@
-include_noise_plugins_TRUE = @include_noise_plugins_TRUE@
-include_pass_filters_plugins_FALSE = @include_pass_filters_plugins_FALSE@
-include_pass_filters_plugins_TRUE = @include_pass_filters_plugins_TRUE@
-include_piolib_FALSE = @include_piolib_FALSE@
-include_piolib_TRUE = @include_piolib_TRUE@
-include_rana_FALSE = @include_rana_FALSE@
-include_rana_TRUE = @include_rana_TRUE@
-include_x11_FALSE = @include_x11_FALSE@
-include_x11_TRUE = @include_x11_TRUE@
+htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
@@ -356,30 +352,31 @@
kde_wallpaperdir = @kde_wallpaperdir@
kde_widgetdir = @kde_widgetdir@
kdeinitdir = @kdeinitdir@
-kst_SUBDIR_included_FALSE = @kst_SUBDIR_included_FALSE@
-kst_SUBDIR_included_TRUE = @kst_SUBDIR_included_TRUE@
libdir = @libdir@
libexecdir = @libexecdir@
+localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
-po_SUBDIR_included_FALSE = @po_SUBDIR_included_FALSE@
-po_SUBDIR_included_TRUE = @po_SUBDIR_included_TRUE@
+pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
+psdir = @psdir@
qt_includes = @qt_includes@
qt_libraries = @qt_libraries@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
-unsermake_enable_pch_FALSE = @unsermake_enable_pch_FALSE@
-unsermake_enable_pch_TRUE = @unsermake_enable_pch_TRUE@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
x_includes = @x_includes@
x_libraries = @x_libraries@
xdg_appsdir = @xdg_appsdir@
@@ -402,26 +399,26 @@
#>- @for dep in $?; do \
#>- case '$(am__configure_deps)' in \
#>- *$$dep*) \
-#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-#>- && exit 0; \
+#>- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+#>- && { if test -f $@; then exit 0; else break; fi; }; \
#>- exit 1;; \
#>- esac; \
#>- done; \
-#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/rw/Makefile'; \
-#>- cd $(top_srcdir) && \
-#>- $(AUTOMAKE) --gnu po/rw/Makefile
+#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/rw/Makefile'; \
+#>- $(am__cd) $(top_srcdir) && \
+#>- $(AUTOMAKE) --gnu po/rw/Makefile
#>+ 12
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/rw/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu po/rw/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/rw/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu po/rw/Makefile
cd $(top_srcdir) && perl admin/am_edit po/rw/Makefile.in
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@@ -440,6 +437,7 @@
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
@@ -447,10 +445,6 @@
clean-libtool:
-rm -rf .libs _libs
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
-
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
@@ -458,7 +452,7 @@
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
- @failcom='exit 1'; \
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
@@ -475,16 +469,15 @@
else \
local_target="$$target"; \
fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
- @failcom='exit 1'; \
+$(RECURSIVE_CLEAN_TARGETS):
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
@@ -510,16 +503,16 @@
else \
local_target="$$target"; \
fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -527,14 +520,14 @@
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
+ set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
@@ -546,39 +539,43 @@
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
+ $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -586,43 +583,59 @@
#>- distdir: $(DISTFILES)
#>+ 1
distdir: distdir-nls $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
- || $(mkdir_p) "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
- distdir=`$(am__cd) $(distdir) && pwd`; \
- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
- (cd $$subdir && \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$top_distdir" \
- distdir="$$distdir/$$subdir" \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
@@ -654,6 +667,7 @@
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -668,8 +682,7 @@
distclean: distclean-recursive
-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool \
- distclean-tags
+distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
@@ -677,6 +690,8 @@
html: html-recursive
+html-am:
+
info: info-recursive
info-am:
@@ -685,12 +700,30 @@
#>+ 1
install-data-am: install-nls
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
install-exec-am:
+install-html: install-html-recursive
+
+install-html-am:
+
install-info: install-info-recursive
+install-info-am:
+
install-man:
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
installcheck-am:
#>- maintainer-clean: maintainer-clean-recursive
@@ -711,22 +744,25 @@
ps-am:
-uninstall-am: uninstall-info-am
+uninstall-am:
-uninstall-info: uninstall-info-recursive
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+ install-am install-strip tags-recursive
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
- clean clean-generic clean-libtool clean-recursive ctags \
- ctags-recursive distclean distclean-generic distclean-libtool \
- distclean-recursive distclean-tags distdir dvi dvi-am html \
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am check check-am clean clean-generic clean-libtool \
+ ctags ctags-recursive distclean distclean-generic \
+ distclean-libtool distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
- install-data-am install-exec install-exec-am install-info \
- install-info-am install-man install-strip installcheck \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic maintainer-clean-recursive \
- mostlyclean mostlyclean-generic mostlyclean-libtool \
- mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
- uninstall uninstall-am uninstall-info-am
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+ uninstall uninstall-am
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
@@ -779,14 +815,14 @@
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/rw/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu po/rw/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/rw/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu po/rw/Makefile
cd $(top_srcdir) && perl admin/am_edit po/rw/Makefile.in
![[patchlogo]](http://patch-tracker.debian.org/static/img/swirlpatch.png)