--- nbd-2.9.16.orig/nbd-client.c
+++ nbd-2.9.16/nbd-client.c
@@ -329,8 +329,7 @@
blocksize=(int)strtol(optarg, NULL, 0);
break;
case 'c':
- check_conn(optarg, 1);
- exit(EXIT_SUCCESS);
+ return check_conn(optarg, 1);
case 'd':
disconnect(optarg);
exit(EXIT_SUCCESS);
--- nbd-2.9.16.orig/nbd-server.5.in
+++ nbd-2.9.16/nbd-server.5.in
@@ -3,7 +3,7 @@
.\" <http://shell.ipoline.com/~elmert/comp/docbook2X/>
.\" Please send any bug reports, improvements, comments, patches,
.\" etc. to Steve Cheng <steve@ggi-project.org>.
-.TH "NBD-SERVER" "5" "24 July 2010" "" ""
+.TH "NBD-SERVER" "5" "28 January 2011" "" ""
.SH NAME
/etc/nbd-server/config \- configuration file for nbd-server
--- nbd-2.9.16.orig/autogen.sh
+++ nbd-2.9.16/autogen.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+set -ex
+srcdir=. make -f Makefile.am nbd-server.1.in nbd-server.5.in nbd-client.8.in
+exec autoreconf -f -i
--- nbd-2.9.16.orig/aclocal.m4
+++ nbd-2.9.16/aclocal.m4
@@ -13,8 +13,8 @@
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],,
-[m4_warning([this file was generated for autoconf 2.65.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.67],,
+[m4_warning([this file was generated for autoconf 2.67.
You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically `autoreconf'.])])
@@ -368,7 +368,7 @@
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
-_PKG_TEXT])dnl
+_PKG_TEXT])[]dnl
])
elif test $pkg_failed = untried; then
AC_MSG_RESULT([no])
@@ -379,7 +379,7 @@
_PKG_TEXT
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.])dnl
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
])
else
$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
--- nbd-2.9.16.orig/nbd-server.1.in
+++ nbd-2.9.16/nbd-server.1.in
@@ -3,7 +3,7 @@
.\" <http://shell.ipoline.com/~elmert/comp/docbook2X/>
.\" Please send any bug reports, improvements, comments, patches,
.\" etc. to Steve Cheng <steve@ggi-project.org>.
-.TH "NBD-SERVER" "1" "24 July 2010" "" ""
+.TH "NBD-SERVER" "1" "28 January 2011" "" ""
.SH NAME
nbd-server \- serve a file as a block device to other computers running the GNU/Linux(tm) or GNU/Hurd Operating System
--- nbd-2.9.16.orig/nbd-client.8.in
+++ nbd-2.9.16/nbd-client.8.in
@@ -3,7 +3,7 @@
.\" <http://shell.ipoline.com/~elmert/comp/docbook2X/>
.\" Please send any bug reports, improvements, comments, patches,
.\" etc. to Steve Cheng <steve@ggi-project.org>.
-.TH "NBD-CLIENT" "8" "24 July 2010" "" ""
+.TH "NBD-CLIENT" "8" "28 January 2011" "" ""
.SH NAME
nbd-client \- connect to a server running nbd-server(1), to use its exported block device
--- nbd-2.9.16.orig/manpage.refs
+++ nbd-2.9.16/manpage.refs
@@ -0,0 +1,4 @@
+{
+ '' => '',
+ '' => ''
+}
--- nbd-2.9.16.orig/manpage.links
+++ nbd-2.9.16/manpage.links
@@ -0,0 +1 @@
+NBD-CLIENT.8 nbd-client.8
--- nbd-2.9.16.orig/Makefile.in
+++ nbd-2.9.16/Makefile.in
@@ -42,8 +42,8 @@
$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(srcdir)/config.h.in $(srcdir)/nbd-client.8.in \
$(srcdir)/nbd-server.1.in $(srcdir)/nbd-server.5.in \
- $(top_srcdir)/configure INSTALL config.guess config.sub \
- depcomp install-sh missing
+ $(top_srcdir)/configure config.guess config.sub depcomp \
+ install-sh missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
--- nbd-2.9.16.orig/CodingStyle
+++ nbd-2.9.16/CodingStyle
@@ -0,0 +1,46 @@
+NBD Coding style.
+=================
+
+The following expresses my opinion of what C code should look like. I'm
+not as strict as the Kernel maintainers on this one (NBD isn't even
+remotely as large anyway), but code that does not follow these rules
+needs to be updated so that it does, which is useless time wasted for
+me. Therefore, it's appreciated if you would follow these rules.
+
+Thanks.
+
+* Use a tab width of 8 characters. You may use tab or 8 spaces as you
+ please, it doesn't really matter to me.
+* opening curly brackets occur on the same line as whatever they're
+ curly brackets for, _in all cases_. This includes function
+ definitions, if structures, loops, and so on; every code block appears
+ like so:
+
+int foo(int bar) {
+ ...
+}
+
+* Variable declarations are separated from the rest of a function block
+ by a line of whitespace. It's okay to assign a value to a variable
+ when you're declaring it if you can do that on one line of code, but
+ it must still be in the block of declarations at the top with a
+ whiteline below.
+* Variables are declared one on each line. So no
+
+ int foo, bar;
+
+ use
+
+ int foo;
+ int bar;
+
+ instead.
+* Try to fit everything in 80 columns. This goes especially for comment
+ lines, but may be relaxed for function calls with 79 arguments, or so,
+ if that's not feasible.
+* If your function block is more than three or so screenfulls, there's a
+ hint that you should break it up.
+
+It is true that not all of the code currently follows these rules; but
+that should not stop you from following them for new code, or from
+cleaning up if you can (i.e., you have commit rights).
--- nbd-2.9.16.orig/nbd.h
+++ nbd-2.9.16/nbd.h
@@ -15,96 +15,7 @@
#ifndef LINUX_NBD_H
#define LINUX_NBD_H
-#define NBD_SET_SOCK _IO( 0xab, 0 )
-#define NBD_SET_BLKSIZE _IO( 0xab, 1 )
-#define NBD_SET_SIZE _IO( 0xab, 2 )
-#define NBD_DO_IT _IO( 0xab, 3 )
-#define NBD_CLEAR_SOCK _IO( 0xab, 4 )
-#define NBD_CLEAR_QUE _IO( 0xab, 5 )
-#define NBD_PRINT_DEBUG _IO( 0xab, 6 )
-#define NBD_SET_SIZE_BLOCKS _IO( 0xab, 7 )
-#define NBD_DISCONNECT _IO( 0xab, 8 )
-
-enum {
- NBD_CMD_READ = 0,
- NBD_CMD_WRITE = 1,
- NBD_CMD_DISC = 2
-};
-
-#define nbd_cmd(req) ((req)->cmd[0])
-#define MAX_NBD 128
-
-/* userspace doesn't need the nbd_device structure */
-#ifdef __KERNEL__
-
-/* values for flags field */
-#define NBD_READ_ONLY 0x0001
-#define NBD_WRITE_NOCHK 0x0002
-
-struct nbd_device {
- int flags;
- int harderror; /* Code of hard error */
- struct socket * sock;
- struct file * file; /* If == NULL, device is not ready, yet */
- int magic;
- spinlock_t queue_lock;
- struct list_head queue_head;/* Requests are added here... */
- struct semaphore tx_lock;
- struct gendisk *disk;
- int blksize;
- u64 bytesize;
-};
-
-#endif
-
-/* These are sent over the network in the request/reply magic fields */
-
-#define NBD_REQUEST_MAGIC 0x25609513
-#define NBD_REPLY_MAGIC 0x67446698
-/* Do *not* use magics: 0x12560953 0x96744668. */
-
-/*
- * This is the packet used for communication between client and
- * server. All data are in network byte order.
- */
-struct nbd_request {
- u32 magic;
- u32 type; /* == READ || == WRITE */
- char handle[8];
- u64 from;
- u32 len;
-}
-#ifdef __GNUC__
- __attribute__ ((packed))
-#endif
-;
-
-/*
- * This is the reply packet that nbd-server sends back to the client after
- * it has completed an I/O request (or an error occurs).
- */
-struct nbd_reply {
- u32 magic;
- u32 error; /* 0 = ok, else error */
- char handle[8]; /* handle you got from request */
-};
-#endif
-/*
- * 1999 Copyright (C) Pavel Machek, pavel@ucw.cz. This code is GPL.
- * 1999/11/04 Copyright (C) 1999 VMware, Inc. (Regis "HPReg" Duchesne)
- * Made nbd_end_request() use the io_request_lock
- * 2001 Copyright (C) Steven Whitehouse
- * New nbd_end_request() for compatibility with new linux block
- * layer code.
- * 2003/06/24 Louis D. Langholtz <ldl@aros.net>
- * Removed unneeded blksize_bits field from nbd_device struct.
- * Cleanup PARANOIA usage & code.
- * 2004/02/19 Paul Clements
- * Removed PARANOIA, plus various cleanup and comments
- */
-
-#ifndef LINUX_NBD_H
-#define LINUX_NBD_H
+//#include <linux/types.h>
#define NBD_SET_SOCK _IO( 0xab, 0 )
#define NBD_SET_BLKSIZE _IO( 0xab, 1 )
@@ -115,6 +26,7 @@
#define NBD_PRINT_DEBUG _IO( 0xab, 6 )
#define NBD_SET_SIZE_BLOCKS _IO( 0xab, 7 )
#define NBD_DISCONNECT _IO( 0xab, 8 )
+#define NBD_SET_TIMEOUT _IO( 0xab, 9 )
enum {
NBD_CMD_READ = 0,
@@ -123,30 +35,8 @@
};
#define nbd_cmd(req) ((req)->cmd[0])
-#define MAX_NBD 128
/* userspace doesn't need the nbd_device structure */
-#ifdef __KERNEL__
-
-/* values for flags field */
-#define NBD_READ_ONLY 0x0001
-#define NBD_WRITE_NOCHK 0x0002
-
-struct nbd_device {
- int flags;
- int harderror; /* Code of hard error */
- struct socket * sock;
- struct file * file; /* If == NULL, device is not ready, yet */
- int magic;
- spinlock_t queue_lock;
- struct list_head queue_head;/* Requests are added here... */
- struct semaphore tx_lock;
- struct gendisk *disk;
- int blksize;
- u64 bytesize;
-};
-
-#endif
/* These are sent over the network in the request/reply magic fields */
@@ -159,24 +49,20 @@
* server. All data are in network byte order.
*/
struct nbd_request {
- u32 magic;
- u32 type; /* == READ || == WRITE */
+ __be32 magic;
+ __be32 type; /* == READ || == WRITE */
char handle[8];
- u64 from;
- u32 len;
-}
-#ifdef __GNUC__
- __attribute__ ((packed))
-#endif
-;
+ __be64 from;
+ __be32 len;
+} __attribute__ ((packed));
/*
* This is the reply packet that nbd-server sends back to the client after
* it has completed an I/O request (or an error occurs).
*/
struct nbd_reply {
- u32 magic;
- u32 error; /* 0 = ok, else error */
+ __be32 magic;
+ __be32 error; /* 0 = ok, else error */
char handle[8]; /* handle you got from request */
};
#endif
--- nbd-2.9.16.orig/nbd-server.c
+++ nbd-2.9.16/nbd-server.c
@@ -144,7 +144,7 @@
#define OFFT_MAX ~((off_t)1<<(sizeof(off_t)*8-1))
#define LINELEN 256 /**< Size of static buffer used to read the
authorization file (yuck) */
-#define BUFSIZE (1024*1024) /**< Size of buffer that can hold requests */
+#define BUFSIZE ((1024*1024)+sizeof(struct nbd_reply)) /**< Size of buffer that can hold requests */
#define DIFFPAGESIZE 4096 /**< diff file uses those chunks */
#define F_READONLY 1 /**< flag to tell us a file is readonly */
#define F_MULTIFILE 2 /**< flag to tell us a file is exported using -m */
@@ -1264,7 +1264,7 @@
if (request.magic != htonl(NBD_REQUEST_MAGIC))
err("Not enough magic.");
- if (len > BUFSIZE + sizeof(struct nbd_reply))
+ if (len > BUFSIZE - sizeof(struct nbd_reply))
err("Request too big!");
#ifdef DODBG
printf("%s from %llu (%llu) len %d, ", request.type ? "WRITE" :
@@ -1919,8 +1919,11 @@
}
if(!servers || !servers->len) {
- g_warning("Could not parse config file: %s",
- err ? err->message : "Unknown error");
+ if(err && !(err->domain == g_quark_from_string("parse_cfile")
+ && err->code == CFILE_NOTFOUND)) {
+ g_warning("Could not parse config file: %s",
+ err ? err->message : "Unknown error");
+ }
}
if(serve) {
g_warning("Specifying an export on the command line is deprecated.");
@@ -1928,7 +1931,7 @@
}
if((!serve) && (!servers||!servers->len)) {
- g_message("Nothing to do! Bye!");
+ g_message("No configured exports; quitting.");
exit(EXIT_FAILURE);
}
daemonize(serve);
--- nbd-2.9.16.orig/configure
+++ nbd-2.9.16/configure
@@ -1,13 +1,13 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.65 for nbd 2.9.16.
+# Generated by GNU Autoconf 2.67 for nbd 2.9.16.
#
# Report bugs to <wouter@debian.org>.
#
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
#
#
# This configure script is free software; the Free Software Foundation
@@ -319,7 +319,7 @@
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
} # as_fn_mkdir_p
@@ -359,19 +359,19 @@
fi # as_fn_arith
-# as_fn_error ERROR [LINENO LOG_FD]
-# ---------------------------------
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with status $?, using 1 if that was 0.
+# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
- as_status=$?; test $as_status -eq 0 && as_status=1
- if test "$3"; then
- as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
- $as_echo "$as_me: error: $1" >&2
+ $as_echo "$as_me: error: $2" >&2
as_fn_exit $as_status
} # as_fn_error
@@ -533,7 +533,7 @@
exec 6>&1
# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
@@ -783,8 +783,9 @@
fi
case $ac_option in
- *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *) ac_optarg=yes ;;
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
@@ -829,7 +830,7 @@
ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid feature name: $ac_useropt"
+ as_fn_error $? "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -855,7 +856,7 @@
ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid feature name: $ac_useropt"
+ as_fn_error $? "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1059,7 +1060,7 @@
ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid package name: $ac_useropt"
+ as_fn_error $? "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1075,7 +1076,7 @@
ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid package name: $ac_useropt"
+ as_fn_error $? "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1105,8 +1106,8 @@
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
- -*) as_fn_error "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information."
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
;;
*=*)
@@ -1114,7 +1115,7 @@
# Reject names that are not valid shell variable names.
case $ac_envvar in #(
'' | [0-9]* | *[!_$as_cr_alnum]* )
- as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
esac
eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
@@ -1132,13 +1133,13 @@
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- as_fn_error "missing argument to $ac_option"
+ as_fn_error $? "missing argument to $ac_option"
fi
if test -n "$ac_unrecognized_opts"; then
case $enable_option_checking in
no) ;;
- fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
*) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
esac
fi
@@ -1161,7 +1162,7 @@
[\\/$]* | ?:[\\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
- as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
done
# There might be people who depend on the old broken behavior: `$host'
@@ -1175,8 +1176,8 @@
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
- $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used." >&2
+ $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used" >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
@@ -1191,9 +1192,9 @@
ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- as_fn_error "working directory cannot be determined"
+ as_fn_error $? "working directory cannot be determined"
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- as_fn_error "pwd does not report name of working directory"
+ as_fn_error $? "pwd does not report name of working directory"
# Find the source files, if location was not specified.
@@ -1232,11 +1233,11 @@
fi
if test ! -r "$srcdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
@@ -1276,7 +1277,7 @@
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking...' messages
+ -q, --quiet, --silent do not print \`checking ...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for \`--cache-file=config.cache'
-n, --no-create do not create output files
@@ -1435,9 +1436,9 @@
if $ac_init_version; then
cat <<\_ACEOF
nbd configure 2.9.16
-generated by GNU Autoconf 2.65
+generated by GNU Autoconf 2.67
-Copyright (C) 2009 Free Software Foundation, Inc.
+Copyright (C) 2010 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
@@ -1507,7 +1508,7 @@
mv -f conftest.er1 conftest.err
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } >/dev/null && {
+ test $ac_status = 0; } > conftest.i && {
test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
test ! -s conftest.err
}; then :
@@ -1574,7 +1575,7 @@
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval "test \"\${$3+set}\"" = set; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -1828,7 +1829,7 @@
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval "test \"\${$3+set}\"" = set; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -1896,7 +1897,7 @@
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval "test \"\${$3+set}\"" = set; then :
$as_echo_n "(cached) " >&6
else
eval "$3=no"
@@ -1949,10 +1950,10 @@
ac_fn_c_check_header_mongrel ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ if eval "test \"\${$3+set}\"" = set; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval "test \"\${$3+set}\"" = set; then :
$as_echo_n "(cached) " >&6
fi
eval ac_res=\$$3
@@ -1988,7 +1989,7 @@
else
ac_header_preproc=no
fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
$as_echo "$ac_header_preproc" >&6; }
@@ -2011,17 +2012,15 @@
$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-( cat <<\_ASBOX
-## -------------------------------- ##
+( $as_echo "## -------------------------------- ##
## Report this to wouter@debian.org ##
-## -------------------------------- ##
-_ASBOX
+## -------------------------------- ##"
) | sed "s/^/$as_me: WARNING: /" >&2
;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval "test \"\${$3+set}\"" = set; then :
$as_echo_n "(cached) " >&6
else
eval "$3=\$ac_header_compiler"
@@ -2038,7 +2037,7 @@
running configure, to aid debugging if configure makes a mistake.
It was created by nbd $as_me 2.9.16, which was
-generated by GNU Autoconf 2.65. Invocation command line was
+generated by GNU Autoconf 2.67. Invocation command line was
$ $0 $@
@@ -2148,11 +2147,9 @@
{
echo
- cat <<\_ASBOX
-## ---------------- ##
+ $as_echo "## ---------------- ##
## Cache variables. ##
-## ---------------- ##
-_ASBOX
+## ---------------- ##"
echo
# The following way of writing the cache mishandles newlines in values,
(
@@ -2186,11 +2183,9 @@
)
echo
- cat <<\_ASBOX
-## ----------------- ##
+ $as_echo "## ----------------- ##
## Output variables. ##
-## ----------------- ##
-_ASBOX
+## ----------------- ##"
echo
for ac_var in $ac_subst_vars
do
@@ -2203,11 +2198,9 @@
echo
if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
-## ------------------- ##
+ $as_echo "## ------------------- ##
## File substitutions. ##
-## ------------------- ##
-_ASBOX
+## ------------------- ##"
echo
for ac_var in $ac_subst_files
do
@@ -2221,11 +2214,9 @@
fi
if test -s confdefs.h; then
- cat <<\_ASBOX
-## ----------- ##
+ $as_echo "## ----------- ##
## confdefs.h. ##
-## ----------- ##
-_ASBOX
+## ----------- ##"
echo
cat confdefs.h
echo
@@ -2280,7 +2271,12 @@
ac_site_file1=NONE
ac_site_file2=NONE
if test -n "$CONFIG_SITE"; then
- ac_site_file1=$CONFIG_SITE
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
elif test "x$prefix" != xNONE; then
ac_site_file1=$prefix/share/config.site
ac_site_file2=$prefix/etc/config.site
@@ -2295,7 +2291,11 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
$as_echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5 ; }
fi
done
@@ -2371,7 +2371,7 @@
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
fi
## -------------------- ##
## Main body of script. ##
@@ -2388,16 +2388,22 @@
ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
- for ac_t in install-sh install.sh shtool; do
- if test -f "$ac_dir/$ac_t"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/$ac_t -c"
- break 2
- fi
- done
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
done
if test -z "$ac_aux_dir"; then
- as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
fi
# These three variables are undocumented and unsupported,
@@ -2513,11 +2519,11 @@
'
case `pwd` in
*[\\\"\#\$\&\'\`$am_lf]*)
- as_fn_error "unsafe absolute working directory name" "$LINENO" 5;;
+ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5 ;;
esac
case $srcdir in
*[\\\"\#\$\&\'\`$am_lf\ \ ]*)
- as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+ as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5 ;;
esac
# Do `set' in a subshell so we don't clobber the current shell's
@@ -2539,7 +2545,7 @@
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
- as_fn_error "ls -t appears to fail. Make sure there is not a broken
+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
alias in your environment" "$LINENO" 5
fi
@@ -2549,7 +2555,7 @@
# Ok.
:
else
- as_fn_error "newly created file is older than distributed files!
+ as_fn_error $? "newly created file is older than distributed files!
Check your system clock" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
@@ -2787,7 +2793,7 @@
$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
set x ${MAKE-make}
ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then :
$as_echo_n "(cached) " >&6
else
cat >conftest.make <<\_ACEOF
@@ -2795,7 +2801,7 @@
all:
@echo '@@@%%%=$(MAKE)=@@@%%%'
_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
case `${MAKE-make} -f conftest.make 2>/dev/null` in
*@@@%%%=?*=@@@%%%*)
eval ac_cv_prog_make_${ac_make}_set=yes;;
@@ -2829,7 +2835,7 @@
am__isrc=' -I$(srcdir)'
# test to see if srcdir already configured
if test -f $srcdir/config.status; then
- as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
fi
fi
@@ -2987,7 +2993,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
if test $ISSERVER -eq 1; then
- as_fn_error "You requested both syslog logging and a debugging version of the server. Bad idea!" "$LINENO" 5
+ as_fn_error $? "You requested both syslog logging and a debugging version of the server. Bad idea!" "$LINENO" 5
fi
$as_echo "#define DODBG 1" >>confdefs.h
@@ -3313,8 +3319,8 @@
test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "no acceptable C compiler found in \$PATH
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5 ; }
# Provide some information about the compiler.
$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
@@ -3428,9 +3434,8 @@
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ as_fn_set_status 77
-as_fn_error "C compiler cannot create executables
-See \`config.log' for more details." "$LINENO" 5; }; }
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5 ; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
@@ -3472,8 +3477,8 @@
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5 ; }
fi
rm -f conftest conftest$ac_cv_exeext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
@@ -3530,9 +3535,9 @@
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run C compiled programs.
+as_fn_error $? "cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
fi
fi
fi
@@ -3583,8 +3588,8 @@
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5 ; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
@@ -4035,7 +4040,7 @@
# Broken: fails on valid input.
continue
fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
@@ -4051,11 +4056,11 @@
ac_preproc_ok=:
break
fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
if $ac_preproc_ok; then :
break
fi
@@ -4094,7 +4099,7 @@
# Broken: fails on valid input.
continue
fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
@@ -4110,18 +4115,18 @@
ac_preproc_ok=:
break
fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
if $ac_preproc_ok; then :
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5 ; }
fi
ac_ext=c
@@ -4133,7 +4138,7 @@
# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
$as_echo_n "checking build system type... " >&6; }
@@ -4144,16 +4149,16 @@
test "x$ac_build_alias" = x &&
ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
test "x$ac_build_alias" = x &&
- as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
$as_echo "$ac_cv_build" >&6; }
case $ac_cv_build in
*-*-*) ;;
-*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;;
esac
build=$ac_cv_build
ac_save_IFS=$IFS; IFS='-'
@@ -4178,7 +4183,7 @@
ac_cv_host=$ac_cv_build
else
ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
fi
fi
@@ -4186,7 +4191,7 @@
$as_echo "$ac_cv_host" >&6; }
case $ac_cv_host in
*-*-*) ;;
-*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;;
esac
host=$ac_cv_host
ac_save_IFS=$IFS; IFS='-'
@@ -4255,7 +4260,7 @@
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_GREP"; then
- as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_GREP=$GREP
@@ -4321,7 +4326,7 @@
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_EGREP"; then
- as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_EGREP=$EGREP
@@ -4453,8 +4458,7 @@
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
"
-eval as_val=\$$as_ac_Header
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
@@ -4684,8 +4688,8 @@
;; #(
*)
- as_fn_error "unknown endianness
- presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
+ as_fn_error $? "unknown endianness
+ presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5
@@ -4825,9 +4829,8 @@
if test "$ac_cv_type_unsigned_short_int" = yes; then
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ as_fn_set_status 77
-as_fn_error "cannot compute sizeof (unsigned short int)
-See \`config.log' for more details." "$LINENO" 5; }; }
+as_fn_error 77 "cannot compute sizeof (unsigned short int)
+See \`config.log' for more details" "$LINENO" 5 ; }
else
ac_cv_sizeof_unsigned_short_int=0
fi
@@ -4859,9 +4862,8 @@
if test "$ac_cv_type_unsigned_int" = yes; then
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ as_fn_set_status 77
-as_fn_error "cannot compute sizeof (unsigned int)
-See \`config.log' for more details." "$LINENO" 5; }; }
+as_fn_error 77 "cannot compute sizeof (unsigned int)
+See \`config.log' for more details" "$LINENO" 5 ; }
else
ac_cv_sizeof_unsigned_int=0
fi
@@ -4893,9 +4895,8 @@
if test "$ac_cv_type_unsigned_long_int" = yes; then
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ as_fn_set_status 77
-as_fn_error "cannot compute sizeof (unsigned long int)
-See \`config.log' for more details." "$LINENO" 5; }; }
+as_fn_error 77 "cannot compute sizeof (unsigned long int)
+See \`config.log' for more details" "$LINENO" 5 ; }
else
ac_cv_sizeof_unsigned_long_int=0
fi
@@ -4927,9 +4928,8 @@
if test "$ac_cv_type_unsigned_long_long_int" = yes; then
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ as_fn_set_status 77
-as_fn_error "cannot compute sizeof (unsigned long long int)
-See \`config.log' for more details." "$LINENO" 5; }; }
+as_fn_error 77 "cannot compute sizeof (unsigned long long int)
+See \`config.log' for more details" "$LINENO" 5 ; }
else
ac_cv_sizeof_unsigned_long_long_int=0
fi
@@ -4950,8 +4950,7 @@
do :
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
@@ -4986,8 +4985,7 @@
do :
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
@@ -5256,7 +5254,7 @@
test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
else
- as_fn_error "Could not find an implementation of the bind() system call" "$LINENO" 5
+ as_fn_error $? "Could not find an implementation of the bind() system call" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing inet_ntoa" >&5
@@ -5314,7 +5312,7 @@
test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
else
- as_fn_error "Could not find an implementation of the inet_ntoa() system call" "$LINENO" 5
+ as_fn_error $? "Could not find an implementation of the inet_ntoa() system call" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing daemon" >&5
@@ -5372,7 +5370,7 @@
test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
else
- as_fn_error "Could not find an implementation of the daemon() system call" "$LINENO" 5
+ as_fn_error $? "Could not find an implementation of the daemon() system call" "$LINENO" 5
fi
for ac_header in sys/mount.h
@@ -5393,8 +5391,7 @@
do :
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-eval as_val=\$$as_ac_Header
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
@@ -5746,7 +5743,7 @@
GLIB_GENMARSHAL=""
GOBJECT_QUERY=""
GLIB_MKENUMS=""
- as_fn_error "Missing glib" "$LINENO" 5
+ as_fn_error $? "Missing glib" "$LINENO" 5
fi
@@ -5908,6 +5905,7 @@
ac_libobjs=
ac_ltlibobjs=
+U=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
@@ -5931,15 +5929,15 @@
fi
if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
- as_fn_error "conditional \"MAINTAINER_MODE\" was never defined.
+ as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- as_fn_error "conditional \"AMDEP\" was never defined.
+ as_fn_error $? "conditional \"AMDEP\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- as_fn_error "conditional \"am__fastdepCC\" was never defined.
+ as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
@@ -6090,19 +6088,19 @@
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-# as_fn_error ERROR [LINENO LOG_FD]
-# ---------------------------------
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with status $?, using 1 if that was 0.
+# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
- as_status=$?; test $as_status -eq 0 && as_status=1
- if test "$3"; then
- as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
- $as_echo "$as_me: error: $1" >&2
+ $as_echo "$as_me: error: $2" >&2
as_fn_exit $as_status
} # as_fn_error
@@ -6298,7 +6296,7 @@
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
} # as_fn_mkdir_p
@@ -6352,7 +6350,7 @@
# values after options handling.
ac_log="
This file was extended by nbd $as_me 2.9.16, which was
-generated by GNU Autoconf 2.65. Invocation command line was
+generated by GNU Autoconf 2.67. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@@ -6418,10 +6416,10 @@
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
nbd config.status 2.9.16
-configured by $0, generated by GNU Autoconf 2.65,
+configured by $0, generated by GNU Autoconf 2.67,
with options \\"\$ac_cs_config\\"
-Copyright (C) 2009 Free Software Foundation, Inc.
+Copyright (C) 2010 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
@@ -6439,11 +6437,16 @@
while test $# != 0
do
case $1 in
- --*=*)
+ --*=?*)
ac_option=`expr "X$1" : 'X\([^=]*\)='`
ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
ac_shift=:
;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
*)
ac_option=$1
ac_optarg=$2
@@ -6465,6 +6468,7 @@
$ac_shift
case $ac_optarg in
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
esac
as_fn_append CONFIG_FILES " '$ac_optarg'"
ac_need_defaults=false;;
@@ -6477,7 +6481,7 @@
ac_need_defaults=false;;
--he | --h)
# Conflict between --help and --header
- as_fn_error "ambiguous option: \`$1'
+ as_fn_error $? "ambiguous option: \`$1'
Try \`$0 --help' for more information.";;
--help | --hel | -h )
$as_echo "$ac_cs_usage"; exit ;;
@@ -6486,7 +6490,7 @@
ac_cs_silent=: ;;
# This is an error.
- -*) as_fn_error "unrecognized option: \`$1'
+ -*) as_fn_error $? "unrecognized option: \`$1'
Try \`$0 --help' for more information." ;;
*) as_fn_append ac_config_targets " $1"
@@ -6548,7 +6552,7 @@
"nbd-server.5") CONFIG_FILES="$CONFIG_FILES nbd-server.5" ;;
"nbd-client.8") CONFIG_FILES="$CONFIG_FILES nbd-client.8" ;;
- *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;;
esac
done
@@ -6586,7 +6590,7 @@
{
tmp=./conf$$-$RANDOM
(umask 077 && mkdir "$tmp")
-} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
# Set up the scripts for CONFIG_FILES section.
# No need to generate them if there are no CONFIG_FILES.
@@ -6603,7 +6607,7 @@
fi
ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\r'
+ ac_cs_awk_cr='\\r'
else
ac_cs_awk_cr=$ac_cr
fi
@@ -6617,18 +6621,18 @@
echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
echo "_ACEOF"
} >conf$$subs.sh ||
- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
. ./conf$$subs.sh ||
- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
if test $ac_delim_n = $ac_delim_num; then
break
elif $ac_last_try; then
- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
@@ -6717,20 +6721,28 @@
else
cat
fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
- || as_fn_error "could not setup config files machinery" "$LINENO" 5
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
_ACEOF
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[ ]*\):*/\1/
+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
s/^[^=]*=[ ]*$//
}'
fi
@@ -6758,7 +6770,7 @@
if test -z "$ac_t"; then
break
elif $ac_last_try; then
- as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
+ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
@@ -6843,7 +6855,7 @@
_ACAWK
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- as_fn_error "could not setup config headers machinery" "$LINENO" 5
+ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
fi # test -n "$CONFIG_HEADERS"
@@ -6856,7 +6868,7 @@
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
- :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
esac
@@ -6884,7 +6896,7 @@
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
- as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;;
esac
case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
as_fn_append ac_file_inputs " '$ac_f'"
@@ -6911,7 +6923,7 @@
case $ac_tag in
*:-:* | *:-) cat >"$tmp/stdin" \
- || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
esac
;;
esac
@@ -7048,22 +7060,22 @@
$ac_datarootdir_hack
"
eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
- || as_fn_error "could not create $ac_file" "$LINENO" 5
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
{ ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
{ ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&5
+which seems to be undefined. Please make sure it is defined" >&5
$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&2;}
+which seems to be undefined. Please make sure it is defined" >&2;}
rm -f "$tmp/stdin"
case $ac_file in
-) cat "$tmp/out" && rm -f "$tmp/out";;
*) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
esac \
- || as_fn_error "could not create $ac_file" "$LINENO" 5
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
;;
:H)
#
@@ -7074,19 +7086,19 @@
$as_echo "/* $configure_input */" \
&& eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
} >"$tmp/config.h" \
- || as_fn_error "could not create $ac_file" "$LINENO" 5
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
$as_echo "$as_me: $ac_file is unchanged" >&6;}
else
rm -f "$ac_file"
mv "$tmp/config.h" "$ac_file" \
- || as_fn_error "could not create $ac_file" "$LINENO" 5
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
fi
else
$as_echo "/* $configure_input */" \
&& eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
- || as_fn_error "could not create -" "$LINENO" 5
+ || as_fn_error $? "could not create -" "$LINENO" 5
fi
# Compute "$ac_file"'s index in $config_headers.
_am_arg="$ac_file"
@@ -7236,7 +7248,7 @@
ac_clean_files=$ac_clean_files_save
test $ac_write_fail = 0 ||
- as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
# configure is writing to config.log, and then calls config.status.
@@ -7257,7 +7269,7 @@
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
- $ac_cs_success || as_fn_exit $?
+ $ac_cs_success || as_fn_exit 1
fi
if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
![[patchlogo]](http://patch-tracker.debian.org/static/img/swirlpatch.png)