--- pmake-1.111.orig/mk/Makefile
+++ pmake-1.111/mk/Makefile
@@ -0,0 +1,16 @@
+#	$NetBSD: Makefile,v 1.24 1999/02/13 02:54:36 lukem Exp $
+#	@(#)Makefile	8.1 (Berkeley) 6/8/93
+
+.include <bsd.own.mk>
+
+.if ${MKSHARE} != "no"
+FILES=	bsd.README bsd.doc.mk bsd.dep.mk bsd.files.mk bsd.inc.mk bsd.info.mk \
+	bsd.kinc.mk bsd.kmod.mk bsd.lib.mk bsd.links.mk bsd.man.mk bsd.nls.mk \
+	bsd.obj.mk bsd.own.mk bsd.prog.mk bsd.subdir.mk bsd.sys.mk sys.mk
+FILESDIR=/usr/share/mk
+.endif
+MKOBJ=	no
+
+FILESMODE=444
+
+.include <bsd.prog.mk>
--- pmake-1.111.orig/mk/bsd.README
+++ pmake-1.111/mk/bsd.README
@@ -0,0 +1,536 @@
+#	$NetBSD: bsd.README,v 1.48 1999/02/13 03:04:09 lukem Exp $
+#	@(#)bsd.README	8.2 (Berkeley) 4/2/94
+
+This is the README file for the new make "include" files for the BSD
+source tree.  The files are installed in /usr/share/mk, and are, by
+convention, named with the suffix ".mk".
+
+Note, this file is not intended to replace reading through the .mk
+files for anything tricky.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+RANDOM THINGS WORTH KNOWING:
+
+The files are simply C-style #include files, and pretty much behave like
+you'd expect.  The syntax is slightly different in that a single '.' is
+used instead of the hash mark, i.e. ".include <bsd.prog.mk>".
+
+One difference that will save you lots of debugging time is that inclusion
+of the file is normally done at the *end* of the Makefile.  The reason for
+this is because .mk files often modify variables and behavior based on the
+values of variables set in the Makefile.  To make this work, remember that
+the FIRST target found is the target that is used, i.e. if the Makefile has:
+
+	a:
+		echo a
+	a:
+		echo a number two
+
+the command "make a" will echo "a".  To make things confusing, the SECOND
+variable assignment is the overriding one, i.e. if the Makefile has:
+
+	a=	foo
+	a=	bar
+
+	b:
+		echo ${a}
+
+the command "make b" will echo "bar".  This is for compatibility with the
+way the V7 make behaved.
+
+It's fairly difficult to make the BSD .mk files work when you're building
+multiple programs in a single directory.  It's a lot easier split up the
+programs than to deal with the problem.  Most of the agony comes from making
+the "obj" directory stuff work right, not because we switched to a new version
+of make.  So, don't get mad at us, figure out a better way to handle multiple
+architectures so we can quit using the symbolic link stuff.  (Imake doesn't
+count.)
+
+The file .depend in the source directory is expected to contain dependencies
+for the source files.  This file is read automatically by make after reading
+the Makefile.
+
+The variable DESTDIR works as before.  It's not set anywhere but will change
+the tree where the file gets installed.
+
+The profiled libraries are no longer built in a different directory than
+the regular libraries.  A new suffix, ".po", is used to denote a profiled
+object, and ".so" denotes a shared (position-independent) object.
+
+The following variables that control how things are made/installed that
+are not set by default. These should not be set by Makefiles; they're for
+the user to define in MAKECONF (see bsd.own.mk, below) or on the make(1)
+command line:
+
+BUILD 		If defined, 'make install' checks that the targets in the
+		source directories are up-to-date and remakes them if they
+                are out of date, instead of blindly trying to install
+                out of date or non-existant targets.
+
+UPDATE 		If defined, 'make install' only installs targets that are
+		more recently modified in the source directories that their
+		installed counterparts.
+
+MKCATPAGES	If "no", don't build or install the catman pages.
+
+MKDOC		If "no", don't build or install the documentation.
+
+MKINFO		If "no", don't build or install Info documentation from
+		Texinfo source files.
+
+MKLINT		If "no", don't build or install the lint libraries.
+
+MKMAN		If "no", don't build or install the man or catman pages.
+		Also acts as "MKCATPAGES=no"
+
+MKNLS		If "no", don't build or install the NLS files.
+
+MKOBJ		If "no", don't create objdirs.
+
+MKPIC		If "no", don't build or install shared libraries.
+
+MKPICINSTALL	If "no", don't install the *_pic.a libraries.
+
+MKPROFILE	If "no", don't build or install the profiling libraries.
+
+MKSHARE		If "no", act as "MKCATPAGES=no MKDOC=no MKINFO=no MKMAN=no
+		MKNLS=no".  I.e, don't build catman pages, documentation,
+		Info documentation, man pages, NLS files, ...
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+The include file <sys.mk> has the default rules for all makes, in the BSD
+environment or otherwise.  You probably don't want to touch this file.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+The include file <bsd.man.mk> handles installing manual pages and their
+links.
+
+It has a two targets:
+
+	maninstall:
+		Install the manual page sources and their links.
+	catinstall:
+		Install the preformatted manual pages and their links.
+
+It sets/uses the following variables:
+
+MANDIR		Base path for manual installation.
+
+MANGRP		Manual group.
+
+MANOWN		Manual owner.
+
+MANMODE		Manual mode.
+
+MANSUBDIR	Subdirectory under the manual page section, i.e. "/vax"
+		or "/tahoe" for machine specific manual pages.
+
+MAN		The manual pages to be installed (use a .1 - .9 suffix).
+
+MLINKS		List of manual page links (using a .1 - .9 suffix).  The
+		linked-to file must come first, the linked file second,
+		and there may be multiple pairs.  The files are soft-linked.
+
+The include file <bsd.man.mk> includes a file named "../Makefile.inc" if
+it exists.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+The include file <bsd.own.mk> contains source tree configuration parameters,
+such as the owners, groups, etc. for both manual pages and binaries, and
+a few global "feature configuration" parameters.
+
+It has no targets.
+
+To get system-specific configuration parameters, bsd.own.mk will try to
+include the file specified by the "MAKECONF" variable.  If MAKECONF is not
+set, or no such file exists, the system make configuration file, /etc/mk.conf
+is included.  These files may define any of the variables described below.
+
+bsd.own.mk sets the following variables, if they are not already defined
+(defaults are in brackets):
+
+BSDSRCDIR	The real path to the system sources, so that 'make obj'
+		will work correctly. [/usr/src]
+
+BSDOBJDIR	The real path to the system 'obj' tree, so that 'make obj'
+		will work correctly. [/usr/obj]
+
+BINGRP		Binary group. [wheel]
+
+BINOWN		Binary owner. [root]
+
+BINMODE		Binary mode. [555]
+
+NONBINMODE	Mode for non-executable files. [444]
+
+MANDIR		Base path for manual installation. [/usr/share/man/cat]
+
+MANGRP		Manual group. [wheel]
+
+MANOWN		Manual owner. [root]
+
+MANMODE		Manual mode. [${NONBINMODE}]
+
+MANINSTALL	Manual installation type: maninstall, catinstall, or both
+
+LIBDIR		Base path for library installation. [/usr/lib]
+
+LINTLIBDIR	Base path for lint(1) library installation. [/usr/libdata/lint]
+
+LIBGRP		Library group. [${BINGRP}]
+
+LIBOWN		Library owner. [${BINOWN}]
+
+LIBMODE		Library mode. [${NONBINMODE}]
+
+DOCDIR		Base path for system documentation (e.g. PSD, USD, etc.)
+	        installation. [/usr/share/doc]
+
+DOCGRP		Documentation group. [wheel]
+
+DOCOWN		Documentation owner. [root]
+
+DOCMODE		Documentation mode. [${NONBINMODE}]
+
+NLSDIR		Base path for National Language Support files installation.
+		[/usr/share/nls]
+
+NLSGRP		National Language Support files group. [wheel]
+
+NLSOWN		National Language Support files owner. [root]
+
+NLSMODE		National Language Support files mode. [${NONBINMODE}]
+
+STRIPFLAG	The flag passed to the install program to cause the binary
+		to be stripped.  This is to be used when building your
+		own install script so that the entire system can be made
+		stripped/not-stripped using a single knob. [-s]
+
+COPY		The flag passed to the install program to cause the binary
+		to be copied rather than moved.  This is to be used when
+		building our own install script so that the entire system
+		can either be installed with copies, or with moves using
+		a single knob. [-c]
+
+Additionally, the following variables may be set by bsd.own.mk or in a
+make configuration file to modify the behaviour of the system build
+process (default values are in brackets along with comments, if set by
+bsd.own.mk):
+
+EXPORTABLE_SYSTEM
+		Do not build /usr/src/domestic, even if it is present.
+
+SKEY		Compile in support for S/key authentication. [yes, set
+		unconditionally]
+
+KERBEROS	Compile in support for Kerberos 4 authentication.
+
+KERBEROS5	Compile in support for Kerberos 5 authentication.
+
+MANZ		Compress manual pages at installation time.
+
+SYS_INCLUDE	Copy or symlink kernel include files into /usr/include.
+		Possible values are "symlinks" or "copies" (which is
+		the same as the variable being unset).
+
+NOPROFILE	Do not build profiled versions of system libraries
+
+NOPIC		Do not build PIC versions of system libraries, and
+		do not build shared libraries.
+
+NOLINT		Do not build lint libraries.
+
+OBJECT_FMT	Object file format. [set to "ELF" on  ports that use
+		ELF -- currently if ${MACHINE_ARCH} is "alpha", "mips"
+		or "powerpc" or  set to "a.out" on other ports].
+
+
+bsd.own.mk is generally useful when building your own Makefiles so that
+they use the same default owners etc. as the rest of the tree.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+The include file <bsd.prog.mk> handles building programs from one or
+more source files, along with their manual pages.  It has a limited number
+of suffixes, consistent with the current needs of the BSD tree.
+
+It has eight targets:
+
+	all:
+		build the program and its manual page
+	clean:
+		remove the program, any object files and the files a.out,
+		Errs, errs, mklog, and ${PROG}.core.
+	cleandir:
+		remove all of the files removed by the target clean, as
+		well as .depend, tags, and any manual pages.
+		`distclean' is a synonym for `cleandir'.
+	depend:
+		make the dependencies for the source files, and store
+		them in the file .depend.
+	includes:
+		install any header files.
+	install:
+		install the program and its manual pages; if the Makefile
+		does not itself define the target install, the targets
+		beforeinstall and afterinstall may also be used to cause
+		actions immediately before and after the install target
+		is executed.
+	lint:
+		run lint on the source files
+	tags:
+		create a tags file for the source files.
+
+It sets/uses the following variables:
+
+BINGRP		Binary group.
+
+BINOWN		Binary owner.
+
+BINMODE		Binary mode.
+
+CLEANFILES	Additional files to remove for the clean and cleandir targets.
+
+COPTS		Additional flags to the compiler when creating C objects.
+
+CPPFLAGS	Additional flags to the C pre-processor
+
+LDADD		Additional loader objects.  Usually used for libraries.
+		For example, to load with the compatibility and utility
+		libraries, use:
+
+			LDADD+=-lutil -lcompat
+
+LDFLAGS		Additional loader flags.
+
+LINKS		The list of binary links; should be full pathnames, the
+		linked-to file coming first, followed by the linked
+		file.  The files are hard-linked.  For example, to link
+		/bin/test and /bin/[, use:
+
+			LINKS=	${DESTDIR}/bin/test ${DESTDIR}/bin/[
+
+SYMLINKS	The list of symbolic links; should be full pathnames.
+                Syntax is identical to LINKS. Note that DESTDIR is not
+		automatically included in the link.
+
+MAN		Manual pages (should end in .1 - .9).  If no MAN variable is
+		defined, "MAN=${PROG}.1" is assumed.
+
+PROG		The name of the program to build.  If not supplied, nothing
+		is built.
+
+PROGNAME	The name that the above program will be installed as, if
+		different from ${PROG}.
+
+SRCS		List of source files to build the program.  If SRCS is not
+		defined, it's assumed to be ${PROG}.c.
+
+DPADD		Additional dependencies for the program.  Usually used for
+		libraries.  For example, to depend on the compatibility and
+		utility libraries use:
+
+			DPADD+=${LIBCOMPAT} ${LIBUTIL}
+
+		The following libraries are predefined for DPADD:
+
+		LIBC?=		${DESTDIR}/usr/lib/libc.a
+		LIBC_PIC?=	${DESTDIR}/usr/lib/libc_pic.a
+		LIBCOMPAT?=	${DESTDIR}/usr/lib/libcompat.a
+		LIBCRYPT?=	${DESTDIR}/usr/lib/libcrypt.a
+		LIBCURSES?=	${DESTDIR}/usr/lib/libcurses.a
+		LIBDBM?=	${DESTDIR}/usr/lib/libdbm.a
+		LIBDES?=	${DESTDIR}/usr/lib/libdes.a
+		LIBEDIT?=	${DESTDIR}/usr/lib/libedit.a
+		LIBGCC?=	${DESTDIR}/usr/lib/libgcc.a
+		LIBGNUMALLOC?=	${DESTDIR}/usr/lib/libgnumalloc.a
+		LIBKDB?=	${DESTDIR}/usr/lib/libkdb.a
+		LIBKRB?=	${DESTDIR}/usr/lib/libkrb.a
+		LIBKVM?=	${DESTDIR}/usr/lib/libkvm.a
+		LIBL?=		${DESTDIR}/usr/lib/libl.a
+		LIBM?=		${DESTDIR}/usr/lib/libm.a
+		LIBMP?=		${DESTDIR}/usr/lib/libmp.a
+		LIBNTP?=	${DESTDIR}/usr/lib/libntp.a
+		LIBPC?=		${DESTDIR}/usr/lib/libpc.a
+		LIBPCAP?=	${DESTDIR}/usr/lib/libpcap.a
+		LIBPLOT?=	${DESTDIR}/usr/lib/libplot.a
+		LIBPOSIX?=	${DESTDIR}/usr/lib/libposix.a
+		LIBRESOLV?=	${DESTDIR}/usr/lib/libresolv.a
+		LIBRPCSVC?=	${DESTDIR}/usr/lib/librpcsvc.a
+		LIBSKEY?=	${DESTDIR}/usr/lib/libskey.a
+		LIBTERMCAP?=	${DESTDIR}/usr/lib/libtermcap.a
+		LIBTELNET?=	${DESTDIR}/usr/lib/libtelnet.a
+		LIBUTIL?=	${DESTDIR}/usr/lib/libutil.a
+		LIBWRAP?=	${DESTDIR}/usr/lib/libwrap.a
+		LIBY?=		${DESTDIR}/usr/lib/liby.a
+		LIBZ?=		${DESTDIR}/usr/lib/libz.a
+
+
+SHAREDSTRINGS	If defined, a new .c.o rule is used that results in shared
+		strings, using xstr(1). Note that this will not work with
+		parallel makes.
+
+STRIP		The flag passed to the install program to cause the binary
+		to be stripped.
+
+SUBDIR		A list of subdirectories that should be built as well.
+		Each of the targets will execute the same target in the
+		subdirectories.
+
+SCRIPTS		A list of interpreter scripts [file.{sh,csh,pl,awk,...}].
+		These are installed exactly like programs.
+
+SCRIPTSNAME	The name that the above program will be installed as, if
+		different from ${SCRIPTS}. These can be further specialized
+		by setting SCRIPTSNAME_<script>.
+
+FILES		A list of files to install. The installation is controlled
+		by the FILESNAME, FILESOWN, FILESGRP, FILESMODE, FILESDIR
+		variables that can be further specialized by FILES<VAR>_<file>
+
+The include file <bsd.prog.mk> includes the file named "../Makefile.inc"
+if it exists, as well as the include file <bsd.man.mk>.
+
+Some simple examples:
+
+To build foo from foo.c with a manual page foo.1, use:
+
+	PROG=	foo
+
+	.include <bsd.prog.mk>
+
+To build foo from foo.c with a manual page foo.2, add the line:
+
+	MAN=	foo.2
+
+If foo does not have a manual page at all, add the line:
+
+	NOMAN=	noman
+
+If foo has multiple source files, add the line:
+
+	SRCS=	a.c b.c c.c d.c
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+The include file <bsd.subdir.mk> contains the default targets for building
+subdirectories.  It has the same eight targets as <bsd.prog.mk>: all, 
+clean, cleandir, depend, includes, install, lint, and tags.  For all of
+the directories listed in the variable SUBDIRS, the specified directory 
+will be visited and the target made.  There is also a default target which
+allows the command "make subdir" where subdir is any directory listed in
+the variable SUBDIRS.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+The include file <bsd.links.mk> handles the LINKS and SYMLINKS variables
+and is included from from bsd.lib.mk and bsd.prog.mk.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+The include file <bsd.files.mk> handles the FILES variables and is included
+from bsd.lib.mk and bsd.prog.mk.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+The include file <bsd.inc.mk> defines the includes target and uses two
+variables:
+
+INCS	The list of include files
+
+INCSDIR	The location to install the include files.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+The include file <bsd.kinc.mk> defines the many targets (includes,
+subdirectories, etc.), and is used by kernel makefiles to handle
+include file installation.  It is intended to be included alone, by
+kernel Makefiles.  Please see bsd.kinc.mk for more details, and keep
+the documentation in that file up to date.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+The include file <bsd.info.mk> is used to generate and install GNU Info
+documentation from respective Texinfo source files.  It defines three
+implicit targets (.txi.info, .texi.info, and .texinfo.info), and uses the
+following variables:
+
+TEXINFO		List of Texinfo source files.  Info documentation will
+		consist of single files with the extension replaced by
+		.info.
+
+INFOFLAGS	Flags to pass to makeinfo.  []
+
+INSTALL_INFO	Name of install-info program.  [install-info]
+
+MAKEINFO	Name of makeinfo program.  [makeinfo]
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+The include file <bsd.sys.mk> is used by <bsd.prog.mk> and
+<bsd.lib.mk>.  It contains overrides that are used when building
+the NetBSD source tree.  For instance, if "PARALLEL" is defined by
+the program/library Makefile, it includes a set of rules for lex and
+yacc that allow multiple lex and yacc targets to be built in parallel.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+The include file <bsd.lib.mk> has support for building libraries.  It has
+the same eight targets as <bsd.prog.mk>: all, clean, cleandir, depend,
+includes, install, lint, and tags.  Additionally, it has a checkver target
+which checks for installed shared object libraries whose version is greater
+that the version of the source. It has a limited number of suffixes,
+consistent with the current needs of the BSD tree.
+
+It sets/uses the following variables:
+
+LIB		The name of the library to build.
+
+LIBDIR		Target directory for libraries.
+
+LINTLIBDIR	Target directory for lint libraries.
+
+LIBGRP		Library group.
+
+LIBOWN		Library owner.
+
+LIBMODE		Library mode.
+
+LDADD		Additional loader objects.
+
+MAN		The manual pages to be installed (use a .1 - .9 suffix).
+
+MKLINKLIB	If "no", act as "MKPICINSTALL=no MKPROFILE=no".
+		Also:
+			- don't install the .a libraries
+			- don't install _pic.a libraries on PIC systems
+			- don't build .a libraries on PIC systems
+			- don't install the .so symlink on ELF systems
+		I.e, only install the shared library (and the .so.major
+		symlink on ELF).
+
+NOCHECKVER_<library>
+NOCHECKVER	If set, disables checking for installed shared object
+		libraries with versions greater than the source.  A
+		particular library name, without the "lib" prefix, may
+		be appended to the variable name to disable the check for
+		only that library.
+
+SRCS		List of source files to build the library.  Suffix types
+		.s, .c, and .f are supported.  Note, .s files are preferred
+		to .c files of the same name.  (This is not the default for
+		versions of make.)
+
+The include file <bsd.lib.mk> includes the file named "../Makefile.inc"
+if it exists, as well as the include file <bsd.man.mk>.
+
+It has rules for building profiled objects; profiled libraries are
+built by default.
+
+Libraries are ranlib'd when made.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
--- pmake-1.111.orig/mk/bsd.dep.mk
+++ pmake-1.111/mk/bsd.dep.mk
@@ -0,0 +1,62 @@
+#	$NetBSD: bsd.dep.mk,v 1.26 1999/02/24 22:04:15 simonb Exp $
+
+.PHONY:		cleandepend
+cleandir distclean: cleandepend
+
+MKDEP?=		mkdep
+
+# some of the rules involve .h sources, so remove them from mkdep line
+depend: beforedepend
+.if defined(SRCS)
+depend: .depend
+	@true # hack to prevent "make depend" from using implicit rules
+.NOPATH: .depend
+.depend: ${SRCS} ${DPSRCS}
+	@rm -f .depend
+	@files="${.ALLSRC:M*.s} ${.ALLSRC:M*.S}"; \
+	if [ "$$files" != " " ]; then \
+	  echo ${MKDEP} -a ${MKDEPFLAGS} \
+	    ${AFLAGS:M-[ID]*:Q} ${CPPFLAGS:Q} ${AINC:Q} $$files; \
+	  ${MKDEP} -a ${MKDEPFLAGS} \
+	    ${AFLAGS:M-[ID]*} ${CPPFLAGS} ${AINC} $$files; \
+	fi
+	@files="${.ALLSRC:M*.c}"; \
+	if [ "$$files" != "" ]; then \
+	  echo ${MKDEP} -a ${MKDEPFLAGS} \
+	    ${CFLAGS:M-[ID]*:Q} ${CPPFLAGS:Q} $$files; \
+	  ${MKDEP} -a ${MKDEPFLAGS} \
+	    ${CFLAGS:M-[ID]*} ${CPPFLAGS} $$files; \
+	fi
+	@files="${.ALLSRC:M*.m}"; \
+	if [ "$$files" != "" ]; then \
+	  echo ${MKDEP} -a ${MKDEPFLAGS} \
+	    ${OBJCFLAGS:M-[ID]*:Q} ${CPPFLAGS:Q} $$files; \
+	  ${MKDEP} -a ${MKDEPFLAGS} \
+	    ${OBJCFLAGS:M-[ID]*} ${CPPFLAGS} $$files; \
+	fi
+	@files="${.ALLSRC:M*.cc} ${.ALLSRC:M*.C} ${.ALLSRC:M*.cxx}"; \
+	if [ "$$files" != "  " ]; then \
+	  echo ${MKDEP} -a ${MKDEPFLAGS} \
+	    ${CXXFLAGS:M-[ID]*:Q} ${CPPFLAGS:Q} $$files; \
+	  ${MKDEP} -a ${MKDEPFLAGS} \
+	    ${CXXFLAGS:M-[ID]*} ${CPPFLAGS} $$files; \
+	fi
+cleandepend:
+	rm -f .depend ${.CURDIR}/tags
+.else
+cleandepend:
+.endif
+depend: afterdepend
+
+beforedepend:
+afterdepend:
+
+.if !target(tags)
+.if defined(SRCS)
+tags: ${SRCS}
+	-cd ${.CURDIR}; ctags -f /dev/stdout ${.ALLSRC:N*.h} | \
+	    sed "s;\${.CURDIR}/;;" > tags
+.else
+tags:
+.endif
+.endif
--- pmake-1.111.orig/mk/bsd.doc.mk
+++ pmake-1.111/mk/bsd.doc.mk
@@ -0,0 +1,78 @@
+#	$NetBSD: bsd.doc.mk,v 1.41 1999/02/12 01:10:06 lukem Exp $
+#	@(#)bsd.doc.mk	8.1 (Berkeley) 8/14/93
+
+.if !target(__initialized__)
+__initialized__:
+.if exists(${.CURDIR}/../Makefile.inc)
+.include "${.CURDIR}/../Makefile.inc"
+.endif
+.include <bsd.own.mk>
+.MAIN:		all
+.endif
+
+.PHONY:		cleandoc docinstall print spell
+.if ${MKSHARE} != "no"
+realinstall:	docinstall
+.endif
+clean cleandir distclean: cleandoc
+
+BIB?=		bib
+EQN?=		eqn
+GREMLIN?=	grn
+GRIND?=		vgrind -f
+INDXBIB?=	indxbib
+PIC?=		pic
+REFER?=		refer
+ROFF?=         groff ${MACROS} ${PAGES}
+SOELIM?=	soelim
+TBL?=		tbl
+
+.if !target(all)
+.if ${MKSHARE} != "no"
+all: paper.ps
+.else
+all:
+.endif
+.endif
+
+.if !target(paper.ps)
+paper.ps: ${SRCS}
+	${ROFF} ${.ALLSRC} > ${.TARGET}
+.endif
+
+.if !target(print)
+print: paper.ps
+	lpr -P${PRINTER} ${.ALLSRC}
+.endif
+
+cleandoc:
+	rm -f paper.* [eE]rrs mklog ${CLEANFILES}
+
+.if ${MKDOC} != "no"
+FILES?=	${SRCS}
+.for F in ${FILES} ${EXTRA} Makefile
+docinstall:: ${DESTDIR}${DOCDIR}/${DIR}/${F}
+.if !defined(UPDATE)
+.PHONY: ${DESTDIR}${DOCDIR}/${DIR}/${F}
+.endif
+.if !defined(BUILD)
+${DESTDIR}${DOCDIR}/${DIR}/${F}: .MADE
+.endif
+
+.PRECIOUS: ${DESTDIR}${DOCDIR}/${DIR}/${F}
+${DESTDIR}${DOCDIR}/${DIR}/${F}: ${F}
+	${INSTALL} ${RENAME} ${PRESERVE} -c -o ${DOCOWN} -g ${DOCGRP} \
+		-m ${DOCMODE} ${.ALLSRC} ${.TARGET}
+.endfor
+.endif
+
+.if !target(docinstall)
+docinstall::
+.endif
+
+spell: ${SRCS}
+	spell ${.ALLSRC} | sort | comm -23 - spell.ok > paper.spell
+
+depend includes lint obj tags:
+
+.include <bsd.obj.mk>
--- pmake-1.111.orig/mk/bsd.files.mk
+++ pmake-1.111/mk/bsd.files.mk
@@ -0,0 +1,43 @@
+#	$NetBSD: bsd.files.mk,v 1.8 1999/02/11 13:25:42 tv Exp $
+
+# This file can be included multiple times.  It clears the definition of
+# FILES at the end so that this is possible.
+
+.PHONY:		filesinstall
+realinstall:	filesinstall
+
+.if defined(FILES) && !empty(FILES)
+FILESDIR?=${BINDIR}
+FILESOWN?=${BINOWN}
+FILESGRP?=${BINGRP}
+FILESMODE?=${NONBINMODE}
+.for F in ${FILES}
+FILESDIR_${F}?=${FILESDIR}
+FILESOWN_${F}?=${FILESOWN}
+FILESGRP_${F}?=${FILESGRP}
+FILESMODE_${F}?=${FILESMODE}
+.if defined(FILESNAME)
+FILESNAME_${F} ?= ${FILESNAME}
+.else
+FILESNAME_${F} ?= ${F:T}
+.endif
+filesinstall:: ${DESTDIR}${FILESDIR_${F}}/${FILESNAME_${F}}
+.if !defined(UPDATE)
+.PHONY: ${DESTDIR}${FILESDIR_${F}}/${FILESNAME_${F}}
+.endif
+.if !defined(BUILD)
+${DESTDIR}${FILESDIR_${F}}/${FILESNAME_${F}}: .MADE
+.endif
+
+.PRECIOUS: ${DESTDIR}${FILESDIR_${F}}/${FILESNAME_${F}}
+${DESTDIR}${FILESDIR_${F}}/${FILESNAME_${F}}: ${F}
+	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${FILESOWN_${F}} \
+		-g ${FILESGRP_${F}} -m ${FILESMODE_${F}} ${.ALLSRC} ${.TARGET}
+.endfor
+.endif
+
+.if !target(filesinstall)
+filesinstall::
+.endif
+
+FILES:=
--- pmake-1.111.orig/mk/bsd.inc.mk
+++ pmake-1.111/mk/bsd.inc.mk
@@ -0,0 +1,25 @@
+#	$NetBSD: bsd.inc.mk,v 1.12 1999/02/04 11:58:30 christos Exp $
+
+.PHONY:		incinstall
+includes:	${INCS} incinstall
+
+.if defined(INCS)
+.for I in ${INCS}
+incinstall:: ${DESTDIR}${INCSDIR}/$I
+
+.PRECIOUS: ${DESTDIR}${INCSDIR}/$I
+.if !defined(UPDATE)
+.PHONY: ${DESTDIR}${INCSDIR}/$I
+.endif
+${DESTDIR}${INCSDIR}/$I: $I
+	@cmp -s ${.ALLSRC} ${.TARGET} > /dev/null 2>&1 || \
+	    (echo "${INSTALL} ${RENAME} ${PRESERVE} -c -o ${BINOWN} \
+		-g ${BINGRP} -m ${NONBINMODE} ${.ALLSRC} ${.TARGET}" && \
+	     ${INSTALL} ${RENAME} ${PRESERVE} -c -o ${BINOWN} -g ${BINGRP} \
+		-m ${NONBINMODE} ${.ALLSRC} ${.TARGET})
+.endfor
+.endif
+
+.if !target(incinstall)
+incinstall::
+.endif
--- pmake-1.111.orig/mk/bsd.info.mk
+++ pmake-1.111/mk/bsd.info.mk
@@ -0,0 +1,60 @@
+#	$NetBSD: bsd.info.mk,v 1.7.2.1 1999/04/22 14:46:13 perry Exp $
+
+.if !target(__initialized__)
+__initialized__:
+.if exists(${.CURDIR}/../Makefile.inc)
+.include "${.CURDIR}/../Makefile.inc"
+.endif
+.include <bsd.own.mk>
+.include <bsd.obj.mk>
+.MAIN:		all
+.endif
+
+MAKEINFO?=	makeinfo
+INFOFLAGS?=	
+INSTALL_INFO?=	install-info
+
+.SUFFIXES: .txi .texi .texinfo .info
+
+.txi.info .texi.info .texinfo.info:
+	@${MAKEINFO} ${INFOFLAGS} --no-split -o $@ $<
+
+.if defined(TEXINFO) && !empty(TEXINFO) && ${MKINFO} != "no"
+INFOFILES=	${TEXINFO:C/\.te?xi(nfo)?$/.info/}
+FILES+=		${INFOFILES}
+
+infoinstall:
+.for F in ${INFOFILES}
+	@${INSTALL_INFO} --remove --info-dir=${DESTDIR}${INFODIR} ${DESTDIR}${INFODIR}/${F}
+	${INSTALL_INFO} --info-dir=${DESTDIR}${INFODIR} ${DESTDIR}${INFODIR}/${F}
+.endfor
+
+.for F in ${INFOFILES}
+FILESDIR_${F}=	${INFODIR}
+FILESOWN_${F}=	${INFOOWN}
+FILESGRP_${F}=	${INFOGRP}
+FILESMODE_${F}=	${INFOMODE}
+FILESNAME_${F}=	${F:T}
+.endfor
+
+all: ${INFOFILES}
+.else
+all:
+.endif
+
+.if ${MKINFO} != "no"
+cleaninfo:
+	rm -f ${INFOFILES}
+.else
+cleaninfo infoinstall:
+.endif
+
+.include <bsd.files.mk>
+
+# These need to happen *after* filesinstall.
+.PHONY: infoinstall cleaninfo
+realinstall: infoinstall
+cleandir distclean: cleaninfo
+
+# Make sure all of the standard targets are defined, even if they do nothing.
+clean depend includes lint regress tags:
--- pmake-1.111.orig/mk/bsd.kinc.mk
+++ pmake-1.111/mk/bsd.kinc.mk
@@ -0,0 +1,136 @@
+#	$NetBSD: bsd.kinc.mk,v 1.5 1999/02/04 11:58:30 christos Exp $
+
+# System configuration variables:
+#
+# SYS_INCLUDE	"symlinks": symlinks to include directories are created.
+#		This may not work 100% properly for all headers.
+#
+#		"copies": directories are made, if necessary, and headers
+#		are installed into them.
+#
+# Variables:
+#
+# INCSDIR	Directory to install includes into (and/or make, and/or
+#		symlink, depending on what's going on).
+#
+# KDIR		Kernel directory to symlink to, if SYS_INCLUDE is symlinks.
+#		If unspecified, no action will be taken when making include
+#		for the directory if SYS_INCLUDE is symlinks.
+#
+# INCS		Headers to install, if SYS_INCLUDE is copies.
+#
+# DEPINCS	Headers to install which are built dynamically.
+#
+# SUBDIR	Subdirectories to enter
+#
+# SYMLINKS	Symlinks to make (unconditionally), a la bsd.links.mk.
+#		Note that the original bits will be 'rm -rf'd rather than
+#		just 'rm -f'd, to make the right thing happen with include
+#		directories.
+#
+
+.if !target(__initialized__)
+__initialized__:
+.if exists(${.CURDIR}/../Makefile.inc)
+.include "${.CURDIR}/../Makefile.inc"
+.endif
+.include <bsd.own.mk>
+.MAIN:		all
+.endif
+
+# Change SYS_INCLUDE in bsd.own.mk or /etc/mk.conf to "symlinks" if you
+# don't want copies
+SYS_INCLUDE?=   copies
+
+# If DESTDIR is set, we're probably building a release, so force "copies".
+.if defined(DESTDIR) && (${DESTDIR} != "/" && !empty(DESTDIR))
+SYS_INCLUDE=    copies
+.endif
+
+
+.PHONY:		incinstall
+includes:	${INCS} incinstall
+
+
+.if ${SYS_INCLUDE} == "symlinks"
+
+# don't install includes, just make symlinks.
+
+.if defined(KDIR)
+SYMLINKS+=	${KDIR} ${INCSDIR}
+.endif
+
+.else # not symlinks
+
+# make sure the directory is OK, and install includes.
+
+.PRECIOUS: ${DESTDIR}${INCSDIR}
+.PHONY: ${DESTDIR}${INCSDIR}
+${DESTDIR}${INCSDIR}:
+	@if [ ! -d ${.TARGET} ] || [ -L ${.TARGET} ] ; then \
+		echo creating ${.TARGET}; \
+		/bin/rm -rf ${.TARGET}; \
+		${INSTALL} -d -o ${BINOWN} -g ${BINGRP} -m 755 ${.TARGET}; \
+	fi
+
+incinstall:: ${DESTDIR}${INCSDIR}
+
+.if defined(INCS)
+.for I in ${INCS}
+incinstall:: ${DESTDIR}${INCSDIR}/$I
+
+.PRECIOUS: ${DESTDIR}${INCSDIR}/$I
+.if !defined(UPDATE)
+.PHONY: ${DESTDIR}${INCSDIR}/$I
+.endif
+${DESTDIR}${INCSDIR}/$I: ${DESTDIR}${INCSDIR} $I 
+	@cmp -s ${.CURDIR}/$I ${.TARGET} > /dev/null 2>&1 || \
+	    (echo "${INSTALL} ${RENAME} ${PRESERVE} -c -o ${BINOWN} \
+		-g ${BINGRP} -m ${NONBINMODE} ${.CURDIR}/$I ${.TARGET}" && \
+	     ${INSTALL} ${RENAME} ${PRESERVE} -c -o ${BINOWN} -g ${BINGRP} \
+		-m ${NONBINMODE} ${.CURDIR}/$I ${.TARGET})
+.endfor
+.endif
+
+.if defined(DEPINCS)
+.for I in ${DEPINCS}
+incinstall:: ${DESTDIR}${INCSDIR}/$I
+
+.PRECIOUS: ${DESTDIR}${INCSDIR}/$I
+.if !defined(UPDATE)
+.PHONY: ${DESTDIR}${INCSDIR}/$I
+.endif
+${DESTDIR}${INCSDIR}/$I: ${DESTDIR}${INCSDIR} $I 
+	@cmp -s $I ${.TARGET} > /dev/null 2>&1 || \
+	    (echo "${INSTALL} ${RENAME} ${PRESERVE} -c -o ${BINOWN} \
+		-g ${BINGRP} -m ${NONBINMODE} $I ${.TARGET}" && \
+	     ${INSTALL} ${RENAME} ${PRESERVE} -c -o ${BINOWN} -g ${BINGRP} \
+		-m ${NONBINMODE} $I ${.TARGET})
+.endfor
+.endif
+
+.endif # not symlinks
+
+.if defined(SYMLINKS) && !empty(SYMLINKS)
+incinstall::
+	@set ${SYMLINKS}; \
+	 while test $$# -ge 2; do \
+		l=$$1; \
+		shift; \
+		t=${DESTDIR}$$1; \
+		shift; \
+		echo ".include <bsd.own.mk>"; \
+		echo "all:: $$t"; \
+		echo ".PHONY: $$t"; \
+		echo "$$t:"; \
+		echo "	@echo \"$$t -> $$l\""; \
+		echo "	@rm -rf $$t"; \
+		echo "	@ln -s $$l $$t"; \
+	done | ${MAKE} -f-
+.endif
+
+.if !target(incinstall)
+incinstall::
+.endif
+
+.include <bsd.subdir.mk>
--- pmake-1.111.orig/mk/bsd.kmod.mk
+++ pmake-1.111/mk/bsd.kmod.mk
@@ -0,0 +1,95 @@
+#	$NetBSD: bsd.kmod.mk,v 1.30 1999/03/10 06:34:19 ross Exp $
+
+.if !target(__initialized__)
+__initialized__:
+.if exists(${.CURDIR}/../Makefile.inc)
+.include "${.CURDIR}/../Makefile.inc"
+.endif
+.include <bsd.own.mk>
+.include <bsd.obj.mk>
+.MAIN:		all
+.endif
+
+.PHONY:		cleankmod kmodinstall load unload
+realinstall:	kmodinstall
+clean cleandir distclean: cleankmod
+
+S?=		/sys
+KERN=		$S/kern
+
+CFLAGS+=	${COPTS} -D_KERNEL -D_LKM -I. -I${.CURDIR} -I$S -I$S/arch
+
+DPSRCS+=	${SRCS:M*.l:.l=.c} ${SRCS:M*.y:.y=.c}
+CLEANFILES+=	${DPSRCS}
+.if defined(YHEADER)
+CLEANFILES+=	${SRCS:M*.y:.y=.h}
+.endif
+
+OBJS+=		${SRCS:N*.h:N*.sh:R:S/$/.o/g}
+
+.if !defined(PROG)
+PROG=	${KMOD}.o
+.endif
+
+${PROG}: ${DPSRCS} ${OBJS} ${DPADD}
+	${LD} -r ${LDFLAGS} -o tmp.o ${OBJS}
+	mv tmp.o ${.TARGET}
+
+.if	!defined(MAN)
+MAN=	${KMOD}.4
+.endif
+
+all: machine-links ${PROG}
+
+.PHONY:	machine-links
+beforedepend: machine-links
+machine-links:
+	-rm -f machine && \
+	    ln -s $S/arch/${MACHINE}/include machine
+	-rm -f ${MACHINE_ARCH} && \
+	    ln -s $S/arch/${MACHINE_ARCH}/include ${MACHINE_ARCH}
+CLEANFILES+=machine ${MACHINE_ARCH}
+
+cleankmod:
+	rm -f a.out [Ee]rrs mklog core *.core \
+		${PROG} ${OBJS} ${LOBJS} ${CLEANFILES}
+
+#
+# define various install targets
+#
+.if !target(kmodinstall)
+kmodinstall:: ${DESTDIR}${KMODDIR}/${PROG}
+.if !defined(UPDATE)
+.PHONY: ${DESTDIR}${KMODDIR}/${PROG}
+.endif
+.if !defined(BUILD)
+${DESTDIR}${KMODDIR}/${PROG}: .MADE
+.endif
+
+.PRECIOUS: ${DESTDIR}${KMODDIR}/${PROG}
+${DESTDIR}${KMODDIR}/${PROG}: ${PROG}
+	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${KMODOWN} -g ${KMODGRP} \
+		-m ${KMODMODE} ${.ALLSRC} ${.TARGET}
+.endif
+
+lint: ${LOBJS}
+.if defined(LOBJS) && !empty(LOBJS)
+	${LINT} ${LINTFLAGS} ${LDFLAGS:M-L*} ${LOBJS} ${LDADD}
+.endif
+
+.if !target(load)
+load:	${PROG}
+	/sbin/modload -o ${KMOD} -e${KMOD}_lkmentry ${PROG}
+.endif
+
+.if !target(unload)
+unload: ${PROG}
+	/sbin/modunload -n ${KMOD}
+.endif
+
+.include <bsd.man.mk>
+.include <bsd.links.mk>
+.include <bsd.dep.mk>
+.include <bsd.sys.mk>
+
+.-include "machine/Makefile.inc"
--- pmake-1.111.orig/mk/bsd.lib.mk
+++ pmake-1.111/mk/bsd.lib.mk
@@ -0,0 +1,396 @@
+#	$NetBSD: bsd.lib.mk,v 1.152 1999/03/30 09:30:43 fair Exp $
+#	@(#)bsd.lib.mk	8.3 (Berkeley) 4/22/94
+
+.if !target(__initialized__)
+__initialized__:
+.if exists(${.CURDIR}/../Makefile.inc)
+.include "${.CURDIR}/../Makefile.inc"
+.endif
+.include <bsd.own.mk>
+.include <bsd.obj.mk>
+.MAIN:		all
+.endif
+
+.PHONY:		checkver cleanlib libinstall
+realinstall:	checkver libinstall
+clean cleandir distclean: cleanlib
+
+.if exists(${.CURDIR}/shlib_version)
+SHLIB_MAJOR != . ${.CURDIR}/shlib_version ; echo $$major
+SHLIB_MINOR != . ${.CURDIR}/shlib_version ; echo $$minor
+
+# Check for higher installed library versions.
+.if !defined(NOCHECKVER) && !defined(NOCHECKVER_${LIB}) && \
+	exists(${BSDSRCDIR}/lib/checkver)
+checkver:
+	@(cd ${.CURDIR} && \
+		${BSDSRCDIR}/lib/checkver -d ${DESTDIR}${LIBDIR} ${LIB})
+.else
+checkver:
+.endif
+.else
+checkver:
+.endif
+
+# add additional suffixes not exported.
+# .po is used for profiling object files.
+# .so is used for PIC object files.
+.SUFFIXES: .out .a .ln .so .po .o .s .S .c .cc .C .m .F .f .r .y .l .cl .p .h
+.SUFFIXES: .sh .m4 .m
+
+
+# Set PICFLAGS to cc flags for producing position-independent code,
+# if not already set.  Includes -DPIC, if required.
+
+# Data-driven table using make variables to control  how shared libraries
+# are built for different platforms and object formats.
+# OBJECT_FMT:		currently either "ELF" or "a.out", from <bsd.own.mk>
+# SHLIB_SOVERSION:  	version number to be compiled into a shared library
+#                    	via -soname. Usualy ${SHLIB_MAJOR} on ELF.
+#   			NetBSD/pmax used to use ${SHLIB_MAJOR}.{SHLIB-MINOR}.
+# SHLIB_SHFLAGS:	Flags to tell ${LD} to emit  shared library.
+#			with ELF, also set shared-lib version for ld.so.
+# SHLIB_LDSTARTFILE:	support .o file, call C++ file-level constructors
+# SHLIB_LDENDFILE:	support .o file, call C++ file-level destructors
+# CPPICFLAGS:	flags for ${CPP} to preprocess  .[sS]  files for ${AS}
+# CPICFLAGS:	flags for ${CC} to compile  .[cC] files to .so objects.
+# CAPICFLAGS	flags for {$CC} to compiling .[Ss] files
+#		 	(usually just ${CPPPICFLAGS} ${CPICFLAGS})
+# APICFLAGS:	flags for ${AS} to assemble .[sS]  to .so objects.
+
+.if ${MACHINE_ARCH} == "alpha"
+		# Alpha-specific shared library flags
+CPICFLAGS ?= -fpic -DPIC
+CPPPICFLAGS?= -DPIC 
+CAPICFLAGS?= ${CPPPICFLAGS} ${CPICFLAGS}
+APICFLAGS ?=
+.elif ${MACHINE_ARCH} == "mipsel" || ${MACHINE_ARCH} == "mipseb"
+		# mips-specific shared library flags
+
+# On mips, all libs need to be compiled with ABIcalls, not just sharedlibs.
+CPICFLAGS?=
+APICFLAGS?=
+#CPICFLAGS?= -fpic -DPIC
+#APICFLAGS?= -DPIC
+
+# so turn shlib PIC flags on for ${CPP}, ${CC}, and ${AS} as follows:
+AINC+=-DPIC -DABICALLS
+COPTS+=	-fPIC ${AINC}
+AFLAGS+= -fPIC
+AS+=	-KPIC
+
+.elif ${MACHINE_ARCH} == "sparc" && ${OBJECT_FMT} == "ELF"
+
+CPICFLAGS ?= -fpic -DPIC
+CPPPICFLAGS?= -DPIC 
+CAPICFLAGS?= ${CPPPICFLAGS} ${CPICFLAGS}
+APICFLAGS ?= -KPIC
+
+.elif (${MACHINE} == "debian")
+
+SHLIB_TYPE=ELF
+SHLIB_LDSTARTFILE=
+SHLIB_LDENDFILE=
+SHLIB_SOVERSION=${SHLIB_MAJOR}
+CPICFLAGS ?= -fPIC -DPIC
+CPPPICFLAGS?= -DPIC
+CAPICFLAGS?= ${CPPPICFLAGS} ${CPICFLAGS}
+APICFLAGS ?=
+
+.else
+
+# Platform-independent flags for NetBSD a.out shared libraries (and PowerPC)
+SHLIB_LDSTARTFILE=
+SHLIB_LDENDFILE=
+SHLIB_SHFLAGS=
+SHLIB_SOVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR}
+CPICFLAGS?= -fpic -DPIC
+CPPPICFLAGS?= -DPIC 
+CAPICFLAGS?= ${CPPPICFLAGS} ${CPICFLAGS}
+APICFLAGS?= -k
+
+.endif
+
+# Platform-independent linker flags for ELF shared libraries
+.if ${OBJECT_FMT} == "ELF"
+SHLIB_SOVERSION=${SHLIB_MAJOR}
+SHLIB_SHFLAGS=-soname lib${LIB}.so.${SHLIB_SOVERSION}
+SHLIB_LDSTARTFILE= ${DESTDIR}/usr/lib/crtbeginS.o
+SHLIB_LDENDFILE= ${DESTDIR}/usr/lib/crtendS.o
+.endif
+
+CFLAGS+=	${COPTS}
+
+.c.o:
+	@echo ${COMPILE.c:Q} ${.IMPSRC}
+	@${COMPILE.c} ${.IMPSRC} -o ${.TARGET}.o
+	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
+	@rm -f ${.TARGET}.o
+
+.c.po:
+	@echo ${COMPILE.c:Q} -pg ${.IMPSRC} -o ${.TARGET}
+	@${COMPILE.c} -pg ${.IMPSRC} -o ${.TARGET}.o
+	@${LD} -X -r ${.TARGET}.o -o ${.TARGET}
+	@rm -f ${.TARGET}.o
+
+.c.so:
+	@echo ${COMPILE.c:Q} ${CPICFLAGS} ${.IMPSRC} -o ${.TARGET}
+	@${COMPILE.c} ${CPICFLAGS} ${.IMPSRC} -o ${.TARGET}.o
+	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
+	@rm -f ${.TARGET}.o
+
+.c.ln:
+	${LINT} ${LINTFLAGS} ${CPPFLAGS:M-[IDU]*} -i ${.IMPSRC}
+
+.cc.o .C.o:
+	@echo ${COMPILE.cc:Q} ${.IMPSRC}
+	@${COMPILE.cc} ${.IMPSRC} -o ${.TARGET}.o
+	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
+	@rm -f ${.TARGET}.o
+
+.cc.po .C.po:
+	@echo ${COMPILE.cc:Q} -pg ${.IMPSRC} -o ${.TARGET}
+	@${COMPILE.cc} -pg ${.IMPSRC} -o ${.TARGET}.o
+	@${LD} -X -r ${.TARGET}.o -o ${.TARGET}
+	@rm -f ${.TARGET}.o
+
+.cc.so .C.so:
+	@echo ${COMPILE.cc:Q} ${CPICFLAGS} ${.IMPSRC} -o ${.TARGET}
+	@${COMPILE.cc} ${CPICFLAGS} ${.IMPSRC} -o ${.TARGET}.o
+	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
+	@rm -f ${.TARGET}.o
+
+.m.o:
+	@echo ${COMPILE.m:Q} ${.IMPSRC}
+	@${COMPILE.m} ${.IMPSRC} -o ${.TARGET}.o
+	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
+	@rm -f ${.TARGET}.o
+
+.m.po:
+	@echo ${COMPILE.m:Q} -pg ${.IMPSRC} -o ${.TARGET}
+	@${COMPILE.m} -pg ${.IMPSRC} -o ${.TARGET}.o
+	@${LD} -X -r ${.TARGET}.o -o ${.TARGET}
+	@rm -f ${.TARGET}.o
+
+.m.so:
+	@echo ${COMPILE.m:Q} ${CPICFLAGS} ${.IMPSRC} -o ${.TARGET}
+	@${COMPILE.m} ${CPICFLAGS} ${.IMPSRC} -o ${.TARGET}.o
+	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
+	@rm -f ${.TARGET}.o
+
+.S.o .s.o:
+	@echo ${COMPILE.S:Q} ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC}
+	@${COMPILE.S} ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET}.o
+	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
+	@rm -f ${.TARGET}.o
+
+.S.po .s.po:
+	@echo ${COMPILE.S:Q} -DGPROF -DPROF ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET}
+	@${COMPILE.S} -DGPROF -DPROF ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET}.o
+	@${LD} -X -r ${.TARGET}.o -o ${.TARGET}
+	@rm -f ${.TARGET}.o
+
+.S.so .s.so:
+	@echo ${COMPILE.S:Q} ${CAPICFLAGS} ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET}
+	@${COMPILE.S} ${CAPICFLAGS} ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET}.o
+	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
+	@rm -f ${.TARGET}.o
+
+.if ${MKPIC} == "no" || (defined(LDSTATIC) && ${LDSTATIC} != "") \
+	|| ${MKLINKLIB} != "no"
+_LIBS=lib${LIB}.a
+.else
+_LIBS=
+.endif
+
+.if ${MKPROFILE} != "no"
+_LIBS+=lib${LIB}_p.a
+.endif
+
+.if ${MKPIC} != "no"
+_LIBS+=lib${LIB}_pic.a
+.if defined(SHLIB_MAJOR) && defined(SHLIB_MINOR)
+_LIBS+=lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
+.endif
+.endif
+
+.if ${MKLINT} != "no" && ${MKLINKLIB} != "no"
+_LIBS+=llib-l${LIB}.ln
+.endif
+
+all: ${SRCS} ${_LIBS}
+
+__archivebuild: .USE
+	@rm -f ${.TARGET}
+	@${AR} cq ${.TARGET} `NM=${NM} ${LORDER} ${.ALLSRC:M*o} | ${TSORT}`
+	${RANLIB} ${.TARGET}
+
+__archiveinstall: .USE
+	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${LIBOWN} -g ${LIBGRP} \
+		-m 600 ${.ALLSRC} ${.TARGET}
+	${RANLIB} -t ${.TARGET}
+	chmod ${LIBMODE} ${.TARGET}
+
+DPSRCS+=	${SRCS:M*.l:.l=.c} ${SRCS:M*.y:.y=.c}
+CLEANFILES+=	${DPSRCS}
+.if defined(YHEADER)
+CLEANFILES+=	${SRCS:M*.y:.y=.h}
+.endif
+
+OBJS+=		${SRCS:N*.h:N*.sh:R:S/$/.o/g}
+lib${LIB}.a:: ${OBJS} __archivebuild
+	@echo building standard ${LIB} library
+
+POBJS+=		${OBJS:.o=.po}
+lib${LIB}_p.a:: ${POBJS} __archivebuild
+	@echo building profiled ${LIB} library
+
+SOBJS+=		${OBJS:.o=.so}
+lib${LIB}_pic.a:: ${SOBJS} __archivebuild
+	@echo building shared object ${LIB} library
+
+lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}: lib${LIB}_pic.a ${DPADD} \
+    ${SHLIB_LDSTARTFILE} ${SHLIB_LDENDFILE}
+	@echo building shared ${LIB} library \(version ${SHLIB_MAJOR}.${SHLIB_MINOR}\)
+	@rm -f lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
+.if defined(DESTDIR)
+	$(CC) -shared ${SHLIB_SHFLAGS} -o ${.TARGET} \
+	    ${SHLIB_LDSTARTFILE} \
+	    -Wl,--whole-archive lib${LIB}_pic.a \
+	    -nostdlib -L${DESTDIR}${LIBDIR} -R${LIBDIR} \
+	    -Wl,--no-whole-archive ${LDADD} \
+	    ${SHLIB_LDENDFILE}
+.else
+	$(CC) -shared ${SHLIB_SHFLAGS} -o ${.TARGET} \
+	    ${SHLIB_LDSTARTFILE} \
+	    -Wl,--whole-archive lib${LIB}_pic.a -Wl,--no-whole-archive ${LDADD} \
+	    ${SHLIB_LDENDFILE}
+.endif
+.if ${OBJECT_FMT} == "ELF"
+	rm -f lib${LIB}.so.${SHLIB_MAJOR}
+	ln -s lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+	    lib${LIB}.so.${SHLIB_MAJOR}
+	rm -f lib${LIB}.so
+	ln -s lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+	    lib${LIB}.so
+.endif
+
+LOBJS+=		${LSRCS:.c=.ln} ${SRCS:M*.c:.c=.ln}
+LLIBS?=		-lc
+llib-l${LIB}.ln: ${LOBJS}
+	@echo building llib-l${LIB}.ln
+	@rm -f llib-l${LIB}.ln
+	@${LINT} -C${LIB} ${.ALLSRC} ${LLIBS}
+
+cleanlib:
+	rm -f a.out [Ee]rrs mklog core *.core ${CLEANFILES}
+	rm -f lib${LIB}.a ${OBJS}
+	rm -f lib${LIB}_p.a ${POBJS}
+	rm -f lib${LIB}_pic.a lib${LIB}.so.* lib${LIB}.so ${SOBJS}
+	rm -f llib-l${LIB}.ln ${LOBJS}
+
+.if defined(SRCS)
+afterdepend: .depend
+	@(TMP=/tmp/_depend$$$$; \
+	    sed -e 's/^\([^\.]*\).o[ ]*:/\1.o \1.po \1.so \1.ln:/' \
+	      < .depend > $$TMP; \
+	    mv $$TMP .depend)
+.endif
+
+.if !target(libinstall)
+# Make sure it gets defined, in case MKPIC==no && MKLINKLIB==no
+libinstall::
+
+.if ${MKLINKLIB} != "no"
+libinstall:: ${DESTDIR}${LIBDIR}/lib${LIB}.a
+.if !defined(UPDATE)
+.PHONY: ${DESTDIR}${LIBDIR}/lib${LIB}.a
+.endif
+.if !defined(BUILD)
+${DESTDIR}${LIBDIR}/lib${LIB}.a: .MADE
+.endif
+
+.PRECIOUS: ${DESTDIR}${LIBDIR}/lib${LIB}.a
+${DESTDIR}${LIBDIR}/lib${LIB}.a: lib${LIB}.a __archiveinstall
+.endif
+
+.if ${MKPROFILE} != "no"
+libinstall:: ${DESTDIR}${LIBDIR}/lib${LIB}_p.a
+.if !defined(UPDATE)
+.PHONY: ${DESTDIR}${LIBDIR}/lib${LIB}_p.a
+.endif
+.if !defined(BUILD)
+${DESTDIR}${LIBDIR}/lib${LIB}_p.a: .MADE
+.endif
+
+.PRECIOUS: ${DESTDIR}${LIBDIR}/lib${LIB}_p.a
+${DESTDIR}${LIBDIR}/lib${LIB}_p.a: lib${LIB}_p.a __archiveinstall
+.endif
+
+.if ${MKPIC} != "no" && ${MKPICINSTALL} != "no"
+libinstall:: ${DESTDIR}${LIBDIR}/lib${LIB}_pic.a
+.if !defined(UPDATE)
+.PHONY: ${DESTDIR}${LIBDIR}/lib${LIB}_pic.a
+.endif
+.if !defined(BUILD)
+${DESTDIR}${LIBDIR}/lib${LIB}_pic.a: .MADE
+.endif
+
+.PRECIOUS: ${DESTDIR}${LIBDIR}/lib${LIB}_pic.a
+${DESTDIR}${LIBDIR}/lib${LIB}_pic.a: lib${LIB}_pic.a __archiveinstall
+.endif
+
+.if ${MKPIC} != "no" && defined(SHLIB_MAJOR) && defined(SHLIB_MINOR)
+libinstall:: ${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
+.if !defined(UPDATE)
+.PHONY: ${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
+.endif
+.if !defined(BUILD)
+${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}: .MADE
+.endif
+
+.PRECIOUS: ${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
+${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}: lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
+	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${LIBOWN} -g ${LIBGRP} \
+		-m ${LIBMODE} ${.ALLSRC} ${.TARGET}
+.if ${OBJECT_FMT} == "a.out" && !defined(DESTDIR)
+	/sbin/ldconfig -m ${LIBDIR}
+.endif
+.if ${OBJECT_FMT} == "ELF"
+	rm -f ${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}
+	ln -s lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+	    ${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}
+	rm -f ${DESTDIR}${LIBDIR}/lib${LIB}.so
+.if ${MKLINKLIB} != "no"
+	ln -s lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+	    ${DESTDIR}${LIBDIR}/lib${LIB}.so
+.endif
+.endif
+.endif
+
+.if ${MKLINT} != "no" && ${MKLINKLIB} != "no"
+libinstall:: ${DESTDIR}${LINTLIBDIR}/llib-l${LIB}.ln
+.if !defined(UPDATE)
+.PHONY: ${DESTDIR}${LINTLIBDIR}/llib-l${LIB}.ln
+.endif
+.if !defined(BUILD)
+${DESTDIR}${LINTLIBDIR}/llib-l${LIB}.ln: .MADE
+.endif
+
+.PRECIOUS: ${DESTDIR}${LINTLIBDIR}/llib-l${LIB}.ln
+${DESTDIR}${LINTLIBDIR}/llib-l${LIB}.ln: llib-l${LIB}.ln
+	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${LIBOWN} -g ${LIBGRP} \
+		-m ${LIBMODE} ${.ALLSRC} ${DESTDIR}${LINTLIBDIR}
+.endif
+.endif
+
+.include <bsd.man.mk>
+.include <bsd.nls.mk>
+.include <bsd.files.mk>
+.include <bsd.inc.mk>
+.include <bsd.links.mk>
+.include <bsd.dep.mk>
+.include <bsd.sys.mk>
+
+# Make sure all of the standard targets are defined, even if they do nothing.
+lint regress:
--- pmake-1.111.orig/mk/bsd.links.mk
+++ pmake-1.111/mk/bsd.links.mk
@@ -0,0 +1,43 @@
+#	$NetBSD: bsd.links.mk,v 1.8 1998/12/31 15:28:52 castor Exp $
+
+.PHONY:		linksinstall
+realinstall:	linksinstall
+
+.if defined(SYMLINKS) && !empty(SYMLINKS)
+linksinstall::
+	@set ${SYMLINKS}; \
+	 while test $$# -ge 2; do \
+		l=$$1; \
+		shift; \
+		t=${DESTDIR}$$1; \
+		shift; \
+		echo ".include <bsd.own.mk>"; \
+		echo "all:: $$t"; \
+		echo ".PHONY: $$t"; \
+		echo "$$t:"; \
+		echo "	@echo \"$$t -> $$l\""; \
+		echo "	@rm -f $$t"; \
+		echo "	@ln -s $$l $$t"; \
+	done | ${MAKE} -f-
+.endif
+.if defined(LINKS) && !empty(LINKS)
+linksinstall::
+	@set ${LINKS}; \
+	 while test $$# -ge 2; do \
+		l=${DESTDIR}$$1; \
+		shift; \
+		t=${DESTDIR}$$1; \
+		shift; \
+		echo ".include <bsd.own.mk>"; \
+		echo "all:: $$t"; \
+		echo ".PHONY: $$t"; \
+		echo "$$t:"; \
+		echo "	@echo \"$$t -> $$l\""; \
+		echo "	@rm -f $$t"; \
+		echo "	@ln $$l $$t"; \
+	done | ${MAKE} -f-
+.endif
+
+.if !target(linksinstall)
+linksinstall:
+.endif
--- pmake-1.111.orig/mk/bsd.man.mk
+++ pmake-1.111/mk/bsd.man.mk
@@ -0,0 +1,156 @@
+#	$NetBSD: bsd.man.mk,v 1.45 1999/02/13 16:34:39 christos Exp $
+#	@(#)bsd.man.mk	8.1 (Berkeley) 6/8/93
+
+.if !target(__initialized__)
+__initialized__:
+.if exists(${.CURDIR}/../Makefile.inc)
+.include "${.CURDIR}/../Makefile.inc"
+.endif
+.include <bsd.own.mk>
+.include <bsd.obj.mk>
+.MAIN:		all
+.endif
+
+.PHONY:		catinstall maninstall catpages manpages catlinks manlinks cleanman
+.if ${MKMAN} != "no"
+realinstall:	${MANINSTALL}
+.endif
+cleandir distclean: cleanman
+
+MANTARGET?=	cat
+NROFF?=		nroff
+TBL?=		tbl
+
+.SUFFIXES: .1 .2 .3 .4 .5 .6 .7 .8 .9 \
+	   .cat1 .cat2 .cat3 .cat4 .cat5 .cat6 .cat7 .cat8 .cat9
+
+.9.cat9 .8.cat8 .7.cat7 .6.cat6 .5.cat5 .4.cat4 .3.cat3 .2.cat2 .1.cat1:
+.if !defined(USETBL)
+	@echo "${NROFF} -mandoc ${.IMPSRC} > ${.TARGET}"
+	@${NROFF} -mandoc ${.IMPSRC} > ${.TARGET} || \
+	 (rm -f ${.TARGET}; false)
+.else
+	@echo "${TBL} ${.IMPSRC} | ${NROFF} -mandoc > ${.TARGET}"
+	@${TBL} ${.IMPSRC} | ${NROFF} -mandoc > ${.TARGET} || \
+	 (rm -f ${.TARGET}; false)
+.endif
+
+.if defined(MAN) && !empty(MAN)
+MANPAGES=	${MAN}
+CATPAGES=	${MANPAGES:C/(.*).([1-9])/\1.cat\2/}
+.endif
+
+MINSTALL=	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${MANOWN} \
+			-g ${MANGRP} -m ${MANMODE}
+
+.if defined(MANZ)
+# chown and chmod are done afterward automatically
+MCOMPRESS=	gzip -9cf
+MCOMPRESSSUFFIX= .gz
+.endif
+
+catinstall: catlinks
+maninstall: manlinks
+
+__installpage: .USE
+.if defined(MCOMPRESS) && !empty(MCOMPRESS)
+	@rm -f ${.TARGET}
+	${MCOMPRESS} ${.ALLSRC} > ${.TARGET}
+	@chown ${MANOWN}:${MANGRP} ${.TARGET}
+	@chmod ${MANMODE} ${.TARGET}
+.else
+	${MINSTALL} ${.ALLSRC} ${.TARGET}
+.endif
+
+
+# Rules for cat'ed man page installation
+.if defined(CATPAGES) && !empty(CATPAGES) && ${MKCATPAGES} != "no"
+.   for P in ${CATPAGES}
+catpages:: ${DESTDIR}${MANDIR}/${P:T:E}${MANSUBDIR}/${P:T:R}.0${MCOMPRESSSUFFIX}
+
+.	if !defined(UPDATE)
+.PHONY: ${DESTDIR}${MANDIR}/${P:T:E}${MANSUBDIR}/${P:T:R}.0${MCOMPRESSSUFFIX}
+.	endif
+.	if !defined(BUILD)
+${DESTDIR}${MANDIR}/${P:T:E}${MANSUBDIR}/${P:T:R}.0${MCOMPRESSSUFFIX}: .MADE
+.	endif
+
+.PRECIOUS: ${DESTDIR}${MANDIR}/${P:T:E}${MANSUBDIR}/${P:T:R}.0${MCOMPRESSSUFFIX}
+${DESTDIR}${MANDIR}/${P:T:E}${MANSUBDIR}/${P:T:R}.0${MCOMPRESSSUFFIX}: ${P} __installpage
+.   endfor
+.else
+catpages::
+.endif
+
+# Rules for source page installation
+.if defined(MANPAGES) && !empty(MANPAGES)
+.   for P in ${MANPAGES}
+manpages:: ${DESTDIR}${MANDIR}/man${P:T:E}${MANSUBDIR}/${P}${MCOMPRESSSUFFIX}
+.	if !defined(UPDATE)
+.PHONY: ${DESTDIR}${MANDIR}/man${P:T:E}${MANSUBDIR}/${P}${MCOMPRESSSUFFIX}
+.	endif
+
+.PRECIOUS: ${DESTDIR}${MANDIR}/man${P:T:E}${MANSUBDIR}/${P}${MCOMPRESSSUFFIX}
+${DESTDIR}${MANDIR}/man${P:T:E}${MANSUBDIR}/${P}${MCOMPRESSSUFFIX}: ${P} __installpage
+.   endfor
+.else
+manpages::
+.endif
+
+.if ${MKCATPAGES} != "no"
+catlinks: catpages
+.if defined(MLINKS) && !empty(MLINKS)
+	@set ${MLINKS}; \
+	while test $$# -ge 2; do \
+		name=$$1; \
+		shift; \
+		dir=${DESTDIR}${MANDIR}/cat$${name##*.}; \
+		l=$${dir}${MANSUBDIR}/$${name%.*}.0${MCOMPRESSSUFFIX}; \
+		name=$$1; \
+		shift; \
+		dir=${DESTDIR}${MANDIR}/cat$${name##*.}; \
+		t=$${dir}${MANSUBDIR}/$${name%.*}.0${MCOMPRESSSUFFIX}; \
+		if [ -z "${UPDATE}" -o ! -f $$t ]; then \
+		    echo $$t -\> $$l; \
+		    ln -sf $$l $$t; \
+		fi; \
+	done
+.endif
+.else
+catlinks:
+.endif
+
+manlinks: manpages
+.if defined(MLINKS) && !empty(MLINKS)
+	@set ${MLINKS}; \
+	while test $$# -ge 2; do \
+		name=$$1; \
+		shift; \
+		dir=${DESTDIR}${MANDIR}/man$${name##*.}; \
+		l=$${dir}${MANSUBDIR}/$${name}${MCOMPRESSSUFFIX}; \
+		name=$$1; \
+		shift; \
+		dir=${DESTDIR}${MANDIR}/man$${name##*.}; \
+		t=$${dir}${MANSUBDIR}/$${name}${MCOMPRESSSUFFIX}; \
+		if [ -z "${UPDATE}" -o ! -f $$t ]; then \
+		    echo $$t -\> $$l; \
+		    ln -sf $$l $$t; \
+		fi; \
+	done
+.endif
+
+.if defined(CATPAGES)
+.if ${MKCATPAGES} != "no" && ${MKMAN} != "no"
+all: ${CATPAGES}
+.else
+all:
+.endif
+
+cleanman:
+	rm -f ${CATPAGES}
+.else
+cleanman:
+.endif
+
+# Make sure all of the standard targets are defined, even if they do nothing.
+clean depend includes lint regress tags:
--- pmake-1.111.orig/mk/bsd.nls.mk
+++ pmake-1.111/mk/bsd.nls.mk
@@ -0,0 +1,64 @@
+#	$NetBSD: bsd.nls.mk,v 1.17 1999/02/12 12:38:45 lukem Exp $
+
+.if !target(__initialized__)
+__initialized__:
+.if exists(${.CURDIR}/../Makefile.inc)
+.include "${.CURDIR}/../Makefile.inc"
+.endif
+
+.MAIN:		all
+.endif
+.PHONY:		cleannls nlsinstall
+.if ${MKNLS} != "no"
+realinstall:	nlsinstall
+.endif
+cleandir distclean: cleannls
+
+.SUFFIXES: .cat .msg
+
+.msg.cat:
+	@rm -f ${.TARGET}
+	gencat ${.TARGET} ${.IMPSRC}
+
+.if defined(NLS) && !empty(NLS)
+NLSALL= ${NLS:.msg=.cat}
+.endif
+
+.if !defined(NLSNAME)
+.if defined(PROG)
+NLSNAME=${PROG}
+.else
+NLSNAME=lib${LIB}
+.endif
+.endif
+
+.if defined(NLSALL)
+.if ${MKNLS} != "no"
+all: ${NLSALL}
+.endif
+
+cleannls:
+	rm -f ${NLSALL}
+
+.for F in ${NLSALL}
+nlsinstall:: ${DESTDIR}${NLSDIR}/${F:T:R}/${NLSNAME}.cat
+.if !defined(UPDATE)
+.PHONY: ${DESTDIR}${NLSDIR}/${F:T:R}/${NLSNAME}.cat
+.endif
+.if !defined(BUILD)
+${DESTDIR}${NLSDIR}/${F:T:R}/${NLSNAME}.cat: .MADE
+.endif
+
+.PRECIOUS: ${DESTDIR}${NLSDIR}/${F:T:R}/${NLSNAME}.cat
+${DESTDIR}${NLSDIR}/${F:T:R}/${NLSNAME}.cat: ${F}
+	${INSTALL} -d ${.TARGET:H}
+	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${NLSOWN} -g ${NLSGRP} \
+		-m ${NLSMODE} ${.ALLSRC} ${.TARGET}
+.endfor
+.else
+cleannls:
+.endif
+
+.if !target(nlsinstall)
+nlsinstall::
+.endif
--- pmake-1.111.orig/mk/bsd.obj.mk
+++ pmake-1.111/mk/bsd.obj.mk
@@ -0,0 +1,54 @@
+#	$NetBSD: bsd.obj.mk,v 1.17 1999/02/12 04:13:26 lukem Exp $
+
+.if !target(__initialized_obj__)
+__initialized_obj__:
+.include <bsd.own.mk>
+.endif
+
+.if ${MKOBJ} == "no"
+obj:
+.else
+
+.if defined(OBJMACHINE)
+__objdir=	obj.${MACHINE}
+.else
+__objdir=	obj
+.endif
+
+.if defined(USR_OBJMACHINE)
+__usrobjdir=	${BSDOBJDIR}.${MACHINE}
+__usrobjdirpf=	
+.else
+__usrobjdir=	${BSDOBJDIR}
+.if defined(OBJMACHINE)
+__usrobjdirpf=	.${MACHINE}
+.else
+__usrobjdirpf=
+.endif
+.endif
+
+obj:
+	@cd ${.CURDIR}; rm -f ${__objdir} > /dev/null 2>&1 || true; \
+	here=`/bin/pwd`; subdir=$${here#${BSDSRCDIR}/}; \
+	if test $$here != $$subdir ; then \
+		dest=${__usrobjdir}/$$subdir${__usrobjdirpf} ; \
+		echo "$$here/${__objdir} -> $$dest"; \
+		rm -rf ${__objdir}; \
+		ln -s $$dest ${__objdir}; \
+		if test -d ${__usrobjdir} -a ! -d $$dest; then \
+			mkdir -p $$dest; \
+		else \
+			true; \
+		fi; \
+	else \
+		true ; \
+		dest=$$here/${__objdir} ; \
+		if test ! -d ${__objdir} ; then \
+			echo "making $$dest" ; \
+			mkdir $$dest; \
+		fi ; \
+	fi;
+.endif
+
+print-objdir:
+	@echo ${.OBJDIR}
--- pmake-1.111.orig/mk/bsd.own.mk
+++ pmake-1.111/mk/bsd.own.mk
@@ -0,0 +1,245 @@
+#	$NetBSD: bsd.own.mk,v 1.120 1999/02/24 14:42:36 drochner Exp $
+
+.if !defined(_BSD_OWN_MK_)
+_BSD_OWN_MK_=1
+
+.if defined(MAKECONF) && exists(${MAKECONF})
+.include "${MAKECONF}"
+.elif exists(/etc/mk.conf)
+.include "/etc/mk.conf"
+.endif
+
+# Defining `SKEY' causes support for S/key authentication to be compiled in.
+SKEY=		yes
+# Defining `KERBEROS' causes support for Kerberos authentication to be
+# compiled in.
+#KERBEROS=	yes
+# Defining 'KERBEROS5' causes support for Kerberos5 authentication to be
+# compiled in.
+#KERBEROS5=	yes
+
+# where the system object and source trees are kept; can be configurable
+# by the user in case they want them in ~/foosrc and ~/fooobj, for example
+BSDSRCDIR?=	/usr/src
+BSDOBJDIR?=	/usr/obj
+
+BINGRP?=	root
+BINOWN?=	root
+BINMODE?=	755
+NONBINMODE?=	644
+
+# Define MANZ to have the man pages compressed (gzip)
+MANZ=		1
+
+MANDIR?=	/usr/share/man
+MANGRP?=	root
+MANOWN?=	root
+MANMODE?=	${NONBINMODE}
+MANINSTALL?=	maninstall catinstall
+
+INFODIR?=	/usr/share/info
+INFOGRP?=	root
+INFOOWN?=	root
+INFOMODE?=	${NONBINMODE}
+
+LIBDIR?=	/usr/lib
+LINTLIBDIR?=	/usr/libdata/lint
+LIBGRP?=	${BINGRP}
+LIBOWN?=	${BINOWN}
+LIBMODE?=	${NONBINMODE}
+
+DOCDIR?=        /usr/share/doc
+DOCGRP?=	root
+DOCOWN?=	root
+DOCMODE?=       ${NONBINMODE}
+
+NLSDIR?=	/usr/share/nls
+NLSGRP?=	root
+NLSOWN?=	root
+NLSMODE?=	${NONBINMODE}
+
+KMODDIR?=	/usr/lkm
+KMODGRP?=	root
+KMODOWN?=	root
+KMODMODE?=	${NONBINMODE}
+
+COPY?=		-c
+.if defined(UPDATE)
+PRESERVE?=	-p
+.else
+PRESERVE?=
+.endif
+RENAME?=
+STRIPFLAG?=	-s
+
+# Define SYS_INCLUDE to indicate whether you want symbolic links to the system
+# source (``symlinks''), or a separate copy (``copies''); (latter useful
+# in environments where it's not possible to keep /sys publicly readable)
+#SYS_INCLUDE= 	symlinks
+
+# XXX The next two are temporary until the transition to UVM is complete.
+
+# Systems on which UVM is the standard VM system.
+.if ${MACHINE} != "pica"
+UVM?=		yes
+.endif
+
+# Systems that use UVM's new pmap interface.
+.if ${MACHINE} == "alpha" || \
+    ${MACHINE} == "i386" || \
+    ${MACHINE} == "pc532" || \
+    ${MACHINE} == "vax"
+PMAP_NEW?=	yes
+.endif
+
+# Data-driven table using make variables to control how 
+# toolchain-dependent targets and shared libraries are built
+# for different platforms and object formats.
+# OBJECT_FMT:		currently either "ELF" or "a.out".
+# SHLIB_TYPE:		"ELF" or "a.out" or "" to force static libraries.
+#
+#.if ${MACHINE_ARCH} == "alpha" || \
+#    ${MACHINE_ARCH} == "mipsel" || ${MACHINE_ARCH} == "mipseb" || \
+#    ${MACHINE_ARCH} == "powerpc" || \
+#    ${MACHINE_ARCH} == "sparc64"
+#OBJECT_FMT?=ELF
+#.else
+
+# On Debian GNU/Linux, Everything is ELF.
+OBJECT_FMT?=a.out
+#.endif
+
+# GNU sources and packages sometimes see architecture names differently.
+# This table maps an architecture name to its GNU counterpart.
+# Use as so:  ${GNU_ARCH.${TARGET_ARCH}} or ${MACHINE_GNU_ARCH}
+GNU_ARCH.alpha=alpha
+GNU_ARCH.arm32=arm
+GNU_ARCH.i386=i386
+GNU_ARCH.m68k=m68k
+GNU_ARCH.mipseb=mipseb
+GNU_ARCH.mipsel=mipsel
+GNU_ARCH.ns32k=ns32k
+GNU_ARCH.powerpc=powerpc
+GNU_ARCH.sparc=sparc
+GNU_ARCH.sparc64=sparc
+GNU_ARCH.vax=vax
+.if ${MACHINE_ARCH} == "mips"
+.INIT:
+	@echo Must set MACHINE_ARCH to one of mipseb or mipsel
+	@false
+.endif
+
+.if ${MACHINE_ARCH} == "sparc64"
+MACHINE_GNU_ARCH=${MACHINE_ARCH}
+.else
+MACHINE_GNU_ARCH=${GNU_ARCH.${MACHINE_ARCH}}
+.endif
+
+TARGETS+=	all clean cleandir depend distclean includes install lint obj \
+		regress tags
+.PHONY:		all clean cleandir depend distclean includes install lint obj \
+		regress tags beforedepend afterdepend beforeinstall \
+		afterinstall realinstall
+
+# set NEED_OWN_INSTALL_TARGET, if it's not already set, to yes
+# this is used by bsd.pkg.mk to stop "install" being defined
+NEED_OWN_INSTALL_TARGET?=	yes
+
+.if ${NEED_OWN_INSTALL_TARGET} == "yes"
+.if !target(install)
+install:	.NOTMAIN beforeinstall subdir-install realinstall afterinstall
+beforeinstall:	.NOTMAIN
+subdir-install:	.NOTMAIN beforeinstall
+realinstall:	.NOTMAIN beforeinstall
+afterinstall:	.NOTMAIN subdir-install realinstall
+.endif
+.endif
+
+# Define MKxxx variables (which are either yes or no) for users
+# to set in /etc/mk.conf and override on the make commandline.
+# These should be tested with `== "no"' or `!= "no"'.
+# The NOxxx variables should only be used by Makefiles.
+#
+
+MKCATPAGES?=no
+
+.if defined(NODOC)
+MKDOC=no
+#.elif !defined(MKDOC)
+#MKDOC=yes
+.else
+MKDOC?=yes
+.endif
+
+MKINFO?=yes
+
+.if defined(NOLINKLIB)
+MKLINKLIB=no
+.else
+MKLINKLIB?=yes
+.endif
+.if ${MKLINKLIB} == "no"
+MKPICINSTALL=no
+MKPROFILE=no
+.endif
+
+.if defined(NOLINT)
+MKLINT=no
+.else
+MKLINT?=yes
+.endif
+
+.if defined(NOMAN)
+MKMAN=no
+.else
+MKMAN?=yes
+.endif
+.if ${MKMAN} == "no"
+MKCATPAGES=no
+.endif
+
+.if defined(NONLS)
+MKNLS=no
+.else
+MKNLS?=yes
+.endif
+
+.if defined(NOOBJ)
+MKOBJ=no
+.else
+MKOBJ?=yes
+.endif
+
+.if defined(NOPIC)
+MKPIC=no
+.else
+MKPIC?=yes
+.endif
+
+.if defined(NOPICINSTALL)
+MKPICINSTALL=no
+.else
+MKPICINSTALL?=yes
+.endif
+
+.if defined(NOPROFILE)
+MKPROFILE=no
+.else
+MKPROFILE?=yes
+.endif
+
+.if defined(NOSHARE)
+MKSHARE=no
+.else
+MKSHARE?=yes
+.endif
+.if ${MKSHARE} == "no"
+MKCATPAGES=no
+MKDOC=no
+MKINFO=no
+MKMAN=no
+MKNLS=no
+.endif
+
+
+.endif		# _BSD_OWN_MK_
--- pmake-1.111.orig/mk/bsd.prog.mk
+++ pmake-1.111/mk/bsd.prog.mk
@@ -0,0 +1,202 @@
+#	$NetBSD: bsd.prog.mk,v 1.100 1999/02/12 01:10:08 lukem Exp $
+#	@(#)bsd.prog.mk	8.2 (Berkeley) 4/2/94
+
+.if !target(__initialized__)
+__initialized__:
+.if exists(${.CURDIR}/../Makefile.inc)
+.include "${.CURDIR}/../Makefile.inc"
+.endif
+.include <bsd.own.mk>
+.include <bsd.obj.mk>
+.MAIN:		all
+.endif
+
+.PHONY:		cleanprog proginstall scriptsinstall
+realinstall:	proginstall scriptsinstall
+clean cleandir distclean: cleanprog
+
+CFLAGS+=	${COPTS}
+
+# ELF platforms depend on crtbegin.o and crtend.o
+.if ${OBJECT_FMT} == "ELF"
+LIBCRTBEGIN?=	${DESTDIR}/usr/lib/crtbegin.o
+LIBCRTEND?=	${DESTDIR}/usr/lib/crtend.o
+.else
+LIBCRTBEGIN?=
+LIBCRTEND?=
+.endif
+
+LIBCRT0?=	
+
+LIBBZ2?=	${DESTDIR}/usr/lib/libbz2.a
+LIBC?=		${DESTDIR}/usr/lib/libc.a
+LIBC_PIC?=	${DESTDIR}/usr/lib/libc_pic.a
+LIBCOMPAT?=	${DESTDIR}/usr/lib/libcompat.a
+LIBCRYPT?=	${DESTDIR}/usr/lib/libcrypt.a
+LIBCURSES?=	${DESTDIR}/usr/lib/libcurses.a
+LIBDBM?=	${DESTDIR}/usr/lib/libdbm.a
+LIBDES?=	${DESTDIR}/usr/lib/libdes.a
+LIBEDIT?=	${DESTDIR}/usr/lib/libedit.a
+LIBGCC?=	${DESTDIR}/usr/lib/libgcc.a
+LIBGNUMALLOC?=	${DESTDIR}/usr/lib/libgnumalloc.a
+LIBKDB?=	${DESTDIR}/usr/lib/libkdb.a
+LIBKRB?=	${DESTDIR}/usr/lib/libkrb.a
+LIBKVM?=	${DESTDIR}/usr/lib/libkvm.a
+LIBL?=		${DESTDIR}/usr/lib/libl.a
+LIBM?=		${DESTDIR}/usr/lib/libm.a
+LIBMP?=		${DESTDIR}/usr/lib/libmp.a
+LIBNTP?=	${DESTDIR}/usr/lib/libntp.a
+LIBOBJC?=	${DESTDIR}/usr/lib/libobjc.a
+LIBPC?=		${DESTDIR}/usr/lib/libpc.a
+LIBPCAP?=	${DESTDIR}/usr/lib/libpcap.a
+LIBPLOT?=	${DESTDIR}/usr/lib/libplot.a
+LIBPOSIX?=	${DESTDIR}/usr/lib/libposix.a
+LIBRESOLV?=	${DESTDIR}/usr/lib/libresolv.a
+LIBRPCSVC?=	${DESTDIR}/usr/lib/librpcsvc.a
+LIBSKEY?=	${DESTDIR}/usr/lib/libskey.a
+LIBTERMCAP?=	${DESTDIR}/usr/lib/libtermcap.a
+LIBTELNET?=	${DESTDIR}/usr/lib/libtelnet.a
+LIBUTIL?=	${DESTDIR}/usr/lib/libutil.a
+LIBWRAP?=	${DESTDIR}/usr/lib/libwrap.a
+LIBY?=		${DESTDIR}/usr/lib/liby.a
+LIBZ?=		${DESTDIR}/usr/lib/libz.a
+
+.if defined(SHAREDSTRINGS)
+CLEANFILES+=strings
+.c.o:
+	${CC} -E ${CFLAGS} ${.IMPSRC} | xstr -c -
+	@${CC} ${CFLAGS} -c x.c -o ${.TARGET}
+	@rm -f x.c
+
+.cc.o:
+	${CXX} -E ${CXXFLAGS} ${.IMPSRC} | xstr -c -
+	@mv -f x.c x.cc
+	@${CXX} ${CXXFLAGS} -c x.cc -o ${.TARGET}
+	@rm -f x.cc
+
+.C.o:
+	${CXX} -E ${CXXFLAGS} ${.IMPSRC} | xstr -c -
+	@mv -f x.c x.C
+	@${CXX} ${CXXFLAGS} -c x.C -o ${.TARGET}
+	@rm -f x.C
+.endif
+
+
+.if defined(PROG)
+SRCS?=		${PROG}.c
+
+DPSRCS+=	${SRCS:M*.l:.l=.c} ${SRCS:M*.y:.y=.c}
+CLEANFILES+=	${DPSRCS}
+.if defined(YHEADER)
+CLEANFILES+=	${SRCS:M*.y:.y=.h}
+.endif
+
+.if !empty(SRCS:N*.h:N*.sh)
+OBJS+=		${SRCS:N*.h:N*.sh:R:S/$/.o/g}
+LOBJS+=		${LSRCS:.c=.ln} ${SRCS:M*.c:.c=.ln}
+.endif
+
+.if defined(OBJS) && !empty(OBJS)
+.NOPATH: ${OBJS}
+.if defined(DESTDIR)
+
+${PROG}: ${LIBCRT0} ${DPSRCS} ${OBJS} ${LIBC} ${LIBCRTBEGIN} ${LIBCRTEND} ${DPADD}
+	${CC} ${LDFLAGS} ${LDSTATIC} -o ${.TARGET} -nostdlib -L${DESTDIR}/usr/lib ${LIBCRT0} ${LIBCRTBEGIN} ${OBJS} ${LDADD} -lgcc -lc -lgcc ${LIBCRTEND}
+
+.else
+
+${PROG}: ${LIBCRT0} ${DPSRCS} ${OBJS} ${LIBC} ${LIBCRTBEGIN} ${LIBCRTEND} ${DPADD}
+	${CC} ${LDFLAGS} ${LDSTATIC} -o ${.TARGET} ${OBJS} ${LDADD}
+
+.endif	# defined(DESTDIR)
+.endif	# defined(OBJS) && !empty(OBJS)
+
+.if !defined(MAN)
+MAN=	${PROG}.1
+.endif	# !defined(MAN)
+.endif	# defined(PROG)
+
+all: ${PROG}
+
+cleanprog:
+	rm -f a.out [Ee]rrs mklog core *.core \
+	    ${PROG} ${OBJS} ${LOBJS} ${CLEANFILES}
+
+.if defined(SRCS)
+afterdepend: .depend
+	@(TMP=/tmp/_depend$$$$; \
+	    sed -e 's/^\([^\.]*\).o[ ]*:/\1.o \1.ln:/' \
+	      < .depend > $$TMP; \
+	    mv $$TMP .depend)
+.endif
+
+.if defined(PROG) && !target(proginstall)
+PROGNAME?= ${PROG}
+proginstall:: ${DESTDIR}${BINDIR}/${PROGNAME}
+.if !defined(UPDATE)
+.PHONY: ${DESTDIR}${BINDIR}/${PROGNAME}
+.endif
+.if !defined(BUILD)
+${DESTDIR}${BINDIR}/${PROGNAME}: .MADE
+.endif
+
+.PRECIOUS: ${DESTDIR}${BINDIR}/${PROGNAME}
+${DESTDIR}${BINDIR}/${PROGNAME}: ${PROG}
+	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} ${STRIPFLAG} -o ${BINOWN} \
+	    -g ${BINGRP} -m ${BINMODE} ${.ALLSRC} ${.TARGET}
+.endif
+
+.if !target(proginstall)
+proginstall::
+.endif
+
+.if defined(SCRIPTS) && !target(scriptsinstall)
+SCRIPTSDIR?=${BINDIR}
+SCRIPTSOWN?=${BINOWN}
+SCRIPTSGRP?=${BINGRP}
+SCRIPTSMODE?=${BINMODE}
+.for S in ${SCRIPTS}
+SCRIPTSDIR_${S}?=${SCRIPTSDIR}
+SCRIPTSOWN_${S}?=${SCRIPTSOWN}
+SCRIPTSGRP_${S}?=${SCRIPTSGRP}
+SCRIPTSMODE_${S}?=${SCRIPTSMODE}
+.if defined(SCRIPTSNAME)
+SCRIPTSNAME_${S} ?= ${SCRIPTSNAME}
+.else
+SCRIPTSNAME_${S} ?= ${S:T:R}
+.endif
+SCRIPTSDIR_${S} ?= ${SCRIPTSDIR}
+scriptsinstall:: ${DESTDIR}${SCRIPTSDIR_${S}}/${SCRIPTSNAME_${S}}
+.if !defined(UPDATE)
+.PHONY: ${DESTDIR}${SCRIPTSDIR_${S}}/${SCRIPTSNAME_${S}}
+.endif
+.if !defined(BUILD)
+${DESTDIR}${SCRIPTSDIR_${S}}/${SCRIPTSNAME_${S}}: .MADE
+.endif
+
+.PRECIOUS: ${DESTDIR}${SCRIPTSDIR_${S}}/${SCRIPTSNAME_${S}}
+${DESTDIR}${SCRIPTSDIR_${S}}/${SCRIPTSNAME_${S}}: ${S}
+	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${SCRIPTSOWN_${S}} -g \
+	    ${SCRIPTSGRP_${S}} -m ${SCRIPTSMODE_${S}} ${.ALLSRC} ${.TARGET}
+.endfor
+.endif
+
+.if !target(scriptsinstall)
+scriptsinstall::
+.endif
+
+lint: ${LOBJS}
+.if defined(LOBJS) && !empty(LOBJS)
+	${LINT} ${LINTFLAGS} ${LDFLAGS:M-L*} ${LOBJS} ${LDADD}
+.endif
+
+.include <bsd.man.mk>
+.include <bsd.nls.mk>
+.include <bsd.files.mk>
+.include <bsd.inc.mk>
+.include <bsd.links.mk>
+.include <bsd.dep.mk>
+.include <bsd.sys.mk>
+
+# Make sure all of the standard targets are defined, even if they do nothing.
+regress:
--- pmake-1.111.orig/mk/bsd.subdir.mk
+++ pmake-1.111/mk/bsd.subdir.mk
@@ -0,0 +1,34 @@
+#	$NetBSD: bsd.subdir.mk,v 1.31 1999/02/11 05:01:39 tv Exp $
+#	@(#)bsd.subdir.mk	8.1 (Berkeley) 6/8/93
+
+.if !target(__initialized__)
+__initialized__:
+.if exists(${.CURDIR}/../Makefile.inc)
+.include "${.CURDIR}/../Makefile.inc"
+.endif
+.include <bsd.own.mk>
+.MAIN:		all
+.endif
+
+.for dir in ${SUBDIR}
+.if exists(${dir}.${MACHINE})
+__REALSUBDIR+=${dir}.${MACHINE}
+.else
+__REALSUBDIR+=${dir}
+.endif
+.endfor
+
+.for dir in ${__REALSUBDIR}
+.for targ in ${TARGETS}
+.PHONY: ${targ}-${dir}
+${targ}-${dir}: .MAKE
+	@echo "${targ} ===> ${_THISDIR_}${dir}"
+	@cd ${.CURDIR}/${dir}; \
+	${MAKE} "_THISDIR_=${_THISDIR_}${dir}/" ${targ}
+subdir-${targ}: ${targ}-${dir}
+${targ}: subdir-${targ}
+.endfor
+.endfor
+
+# Make sure all of the standard targets are defined, even if they do nothing.
+${TARGETS}:
--- pmake-1.111.orig/mk/bsd.sys.mk
+++ pmake-1.111/mk/bsd.sys.mk
@@ -0,0 +1,110 @@
+#	$NetBSD: bsd.sys.mk,v 1.34 1999/01/31 09:17:20 mrg Exp $
+#
+# Overrides used for NetBSD source tree builds.
+
+.if defined(WARNS) && ${WARNS} == 1
+CFLAGS+= -Wall -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith
+.endif
+.if !defined(NOGCCERROR)
+CFLAGS+= -Werror
+.endif
+CFLAGS+= ${CWARNFLAGS}
+
+.if defined(DESTDIR)
+CPPFLAGS+= -nostdinc -idirafter ${DESTDIR}/usr/include
+LINTFLAGS+= -d ${DESTDIR}/usr/include
+.endif
+
+.if defined(AUDIT)
+CPPFLAGS+= -D__AUDIT__
+.endif
+
+# Helpers for cross-compiling
+HOST_CC?=	cc
+HOST_CFLAGS?=	-O
+HOST_COMPILE.c?=${HOST_CC} ${HOST_CFLAGS} ${HOST_CPPFLAGS} -c
+HOST_LINK.c?=	${HOST_CC} ${HOST_CFLAGS} ${HOST_CPPFLAGS} ${HOST_LDFLAGS}
+
+HOST_CPP?=	cpp
+HOST_CPPFLAGS?=
+
+HOST_LD?=	ld
+HOST_LDFLAGS?=
+
+STRIPPROG?=	strip
+
+
+.SUFFIXES:	.m .o .ln .lo
+
+# Objective C
+# (Defined here rather than in <sys.mk> because `.m' is not just
+#  used for Objective C source)
+.m:
+	${LINK.m} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
+.m.o:
+	${COMPILE.m} ${.IMPSRC}
+
+# Host-compiled C objects
+.c.lo:
+	${HOST_COMPILE.c} -o ${.TARGET} ${.IMPSRC}
+
+
+.if defined(PARALLEL) || defined(LPREFIX)
+LPREFIX?=yy
+LFLAGS+=-P${LPREFIX}
+# Lex
+.l:
+	${LEX.l} -o${.TARGET:R}.${LPREFIX}.c ${.IMPSRC}
+	${LINK.c} -o ${.TARGET} ${.TARGET:R}.${LPREFIX}.c ${LDLIBS} -ll
+	rm -f ${.TARGET:R}.${LPREFIX}.c
+.l.c:
+	${LEX.l} -o${.TARGET} ${.IMPSRC}
+.l.o:
+	${LEX.l} -o${.TARGET:R}.${LPREFIX}.c ${.IMPSRC}
+	${COMPILE.c} -o ${.TARGET} ${.TARGET:R}.${LPREFIX}.c 
+	rm -f ${.TARGET:R}.${LPREFIX}.c
+.l.lo:
+	${LEX.l} -o${.TARGET:R}.${LPREFIX}.c ${.IMPSRC}
+	${HOST_COMPILE.c} -o ${.TARGET} ${.TARGET:R}.${LPREFIX}.c 
+	rm -f ${.TARGET:R}.${LPREFIX}.c
+.endif
+
+# Yacc
+.if defined(YHEADER) || defined(YPREFIX)
+.if defined(YPREFIX)
+YFLAGS+=-p${YPREFIX}
+.endif
+.if defined(YHEADER)
+YFLAGS+=-d
+.endif
+.y:
+	${YACC.y} -b ${.TARGET:R} ${.IMPSRC}
+	${LINK.c} -o ${.TARGET} ${.TARGET:R}.tab.c ${LDLIBS}
+	rm -f ${.TARGET:R}.tab.c ${.TARGET:R}.tab.h
+.y.h: ${.TARGET:R}.c
+.y.c:
+	${YACC.y} -o ${.TARGET} ${.IMPSRC}
+.y.o:
+	${YACC.y} -b ${.TARGET:R} ${.IMPSRC}
+	${COMPILE.c} -o ${.TARGET} ${.TARGET:R}.tab.c
+	rm -f ${.TARGET:R}.tab.c ${TARGET:R}.tab.h
+.y.lo:
+	${YACC.y} -b ${.TARGET:R} ${.IMPSRC}
+	${HOST_COMPILE.c} -o ${.TARGET} ${.TARGET:R}.tab.c
+	rm -f ${.TARGET:R}.tab.c ${TARGET:R}.tab.h
+.elif defined(PARALLEL)
+.y:
+	${YACC.y} -b ${.TARGET:R} ${.IMPSRC}
+	${LINK.c} -o ${.TARGET} ${.TARGET:R}.tab.c ${LDLIBS}
+	rm -f ${.TARGET:R}.tab.c
+.y.c:
+	${YACC.y} -o ${.TARGET} ${.IMPSRC}
+.y.o:
+	${YACC.y} -b ${.TARGET:R} ${.IMPSRC}
+	${COMPILE.c} -o ${.TARGET} ${.TARGET:R}.tab.c
+	rm -f ${.TARGET:R}.tab.c
+.y.lo:
+	${YACC.y} -b ${.TARGET:R} ${.IMPSRC}
+	${HOST_COMPILE.c} -o ${.TARGET} ${.TARGET:R}.tab.c
+	rm -f ${.TARGET:R}.tab.c
+.endif
--- pmake-1.111.orig/mk/sys.mk
+++ pmake-1.111/mk/sys.mk
@@ -0,0 +1,207 @@
+#	$NetBSD: sys.mk,v 1.54 1999/03/10 14:06:14 mycroft Exp $
+#	@(#)sys.mk	8.2 (Berkeley) 3/21/94
+
+unix?=		We run Debian GNU.
+
+.SUFFIXES: .out .a .ln .o .s .S .c .cc .C .F .f .r .y .l .cl .p .h .sh .m4
+
+.LIBS:		.a
+
+AR?=		ar
+ARFLAGS?=	rl
+RANLIB?=	ranlib
+
+AS?=		as
+AFLAGS?=
+COMPILE.s?=	${CC} ${AFLAGS} -c
+LINK.s?=	${CC} ${AFLAGS} ${LDFLAGS}
+COMPILE.S?=	${CC} ${AFLAGS} ${CPPFLAGS} -c -traditional-cpp
+LINK.S?=	${CC} ${AFLAGS} ${CPPFLAGS} ${LDFLAGS}
+
+CC?=		cc
+.if ${MACHINE_ARCH} == "alpha" || \
+    ${MACHINE_ARCH} == "arm32" || \
+    ${MACHINE_ARCH} == "i386" || \
+    ${MACHINE_ARCH} == "m68k" || \
+    ${MACHINE_ARCH} == "mipsel" || ${MACHINE_ARCH} == "mipseb" || \
+    ${MACHINE_ARCH} == "sparc"
+CFLAGS?=	-O2
+.else
+CFLAGS?=	-O
+.endif
+COMPILE.c?=	${CC} ${CFLAGS} ${CPPFLAGS} -c
+LINK.c?=	${CC} ${CFLAGS} ${CPPFLAGS} ${LDFLAGS}
+
+CXX?=		c++
+CXXFLAGS?=	${CFLAGS}
+COMPILE.cc?=	${CXX} ${CXXFLAGS} ${CPPFLAGS} -c
+LINK.cc?=	${CXX} ${CXXFLAGS} ${CPPFLAGS} ${LDFLAGS}
+
+OBJC?=		${CC}
+OBJCFLAGS?=	${CFLAGS}
+COMPILE.m?=	${OBJC} ${OBJCFLAGS} ${CPPFLAGS} -c
+LINK.m?=	${OBJC} ${OBJCFLAGS} ${CPPFLAGS} ${LDFLAGS}
+
+CPP?=		cpp
+CPPFLAGS?=	
+
+FC?=		f77
+FFLAGS?=	-O
+RFLAGS?=
+COMPILE.f?=	${FC} ${FFLAGS} -c
+LINK.f?=	${FC} ${FFLAGS} ${LDFLAGS}
+COMPILE.F?=	${FC} ${FFLAGS} ${CPPFLAGS} -c
+LINK.F?=	${FC} ${FFLAGS} ${CPPFLAGS} ${LDFLAGS}
+COMPILE.r?=	${FC} ${FFLAGS} ${RFLAGS} -c
+LINK.r?=	${FC} ${FFLAGS} ${RFLAGS} ${LDFLAGS}
+
+INSTALL?=	install
+
+LEX?=		lex
+LFLAGS?=
+LEX.l?=		${LEX} ${LFLAGS}
+
+LD?=		ld
+LDFLAGS?=
+
+LINT?=		lint
+LINTFLAGS?=	-chapbxzF
+
+LORDER?=	lorder
+
+MAKE?=		pmake
+
+NM?=		nm
+
+PC?=		pc
+PFLAGS?=
+COMPILE.p?=	${PC} ${PFLAGS} ${CPPFLAGS} -c
+LINK.p?=	${PC} ${PFLAGS} ${CPPFLAGS} ${LDFLAGS}
+
+SHELL?=		sh
+
+SIZE?=		size
+
+TSORT?= 	tsort
+
+YACC?=		yacc
+YFLAGS?=
+YACC.y?=	${YACC} ${YFLAGS}
+
+# C
+.c:
+	${LINK.c} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
+.c.o:
+	${COMPILE.c} ${.IMPSRC}
+.c.a:
+	${COMPILE.c} ${.IMPSRC}
+	${AR} ${ARFLAGS} $@ $*.o
+	rm -f $*.o
+.c.ln:
+	${LINT} ${LINTFLAGS} ${CPPFLAGS:M-[IDU]*} -i ${.IMPSRC}
+
+# C++
+.cc:
+	${LINK.cc} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
+.cc.o:
+	${COMPILE.cc} ${.IMPSRC}
+.cc.a:
+	${COMPILE.cc} ${.IMPSRC}
+	${AR} ${ARFLAGS} $@ $*.o
+	rm -f $*.o
+
+.C:
+	${LINK.cc} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
+.C.o:
+	${COMPILE.cc} ${.IMPSRC}
+.C.a:
+	${COMPILE.cc} ${.IMPSRC}
+	${AR} ${ARFLAGS} $@ $*.o
+	rm -f $*.o
+
+# Fortran/Ratfor
+.f:
+	${LINK.f} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
+.f.o:
+	${COMPILE.f} ${.IMPSRC}
+.f.a:
+	${COMPILE.f} ${.IMPSRC}
+	${AR} ${ARFLAGS} $@ $*.o
+	rm -f $*.o
+
+.F:
+	${LINK.F} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
+.F.o:
+	${COMPILE.F} ${.IMPSRC}
+.F.a:
+	${COMPILE.F} ${.IMPSRC}
+	${AR} ${ARFLAGS} $@ $*.o
+	rm -f $*.o
+
+.r:
+	${LINK.r} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
+.r.o:
+	${COMPILE.r} ${.IMPSRC}
+.r.a:
+	${COMPILE.r} ${.IMPSRC}
+	${AR} ${ARFLAGS} $@ $*.o
+	rm -f $*.o
+
+# Pascal
+.p:
+	${LINK.p} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
+.p.o:
+	${COMPILE.p} ${.IMPSRC}
+.p.a:
+	${COMPILE.p} ${.IMPSRC}
+	${AR} ${ARFLAGS} $@ $*.o
+	rm -f $*.o
+
+# Assembly
+.s:
+	${LINK.s} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
+.s.o:
+	${COMPILE.s} ${.IMPSRC}
+.s.a:
+	${COMPILE.s} ${.IMPSRC}
+	${AR} ${ARFLAGS} $@ $*.o
+	rm -f $*.o
+.S:
+	${LINK.S} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
+.S.o:
+	${COMPILE.S} ${.IMPSRC}
+.S.a:
+	${COMPILE.S} ${.IMPSRC}
+	${AR} ${ARFLAGS} $@ $*.o
+	rm -f $*.o
+
+# Lex
+.l:
+	${LEX.l} ${.IMPSRC}
+	${LINK.c} -o ${.TARGET} lex.yy.c ${LDLIBS} -ll
+	rm -f lex.yy.c
+.l.c:
+	${LEX.l} ${.IMPSRC}
+	mv lex.yy.c ${.TARGET}
+.l.o:
+	${LEX.l} ${.IMPSRC}
+	${COMPILE.c} -o ${.TARGET} lex.yy.c 
+	rm -f lex.yy.c
+
+# Yacc
+.y:
+	${YACC.y} ${.IMPSRC}
+	${LINK.c} -o ${.TARGET} y.tab.c ${LDLIBS}
+	rm -f y.tab.c
+.y.c:
+	${YACC.y} ${.IMPSRC}
+	mv y.tab.c ${.TARGET}
+.y.o:
+	${YACC.y} ${.IMPSRC}
+	${COMPILE.c} -o ${.TARGET} y.tab.c
+	rm -f y.tab.c
+
+# Shell
+.sh:
+	rm -f ${.TARGET}
+	cp ${.IMPSRC} ${.TARGET}