libtoolize --force --copy
aclocal
automake -acf -Wno-portability
autoheader
autoconf
rm -rf autom4te.cache/ config.h.in~
diff '-x*config.guess' '-x*config.sub' -Naur libgail-gnome-1.20.2.old/aclocal.m4 libgail-gnome-1.20.2/aclocal.m4
Index: libgail-gnome-1.20.3/aclocal.m4
===================================================================
--- libgail-gnome-1.20.3.orig/aclocal.m4 2010-09-08 20:11:50.451334936 +0200
+++ libgail-gnome-1.20.3/aclocal.m4 2010-09-08 20:11:12.458832958 +0200
@@ -13,4533 +13,3810 @@
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],,
-[m4_warning([this file was generated for autoconf 2.65.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.67],,
+[m4_warning([this file was generated for autoconf 2.67.
You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically `autoreconf'.])])
-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+dnl AM_GCONF_SOURCE_2
+dnl Defines GCONF_SCHEMA_CONFIG_SOURCE which is where you should install schemas
+dnl (i.e. pass to gconftool-2
+dnl Defines GCONF_SCHEMA_FILE_DIR which is a filesystem directory where
+dnl you should install foo.schemas files
+dnl
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.11'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.11.1], [],
- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
+AC_DEFUN([AM_GCONF_SOURCE_2],
+[
+ if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then
+ GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source`
+ else
+ GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE
+ fi
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too. Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
+ AC_ARG_WITH([gconf-source],
+ AC_HELP_STRING([--with-gconf-source=sourceaddress],
+ [Config database for installing schema files.]),
+ [GCONF_SCHEMA_CONFIG_SOURCE="$withval"],)
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.1])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+ AC_SUBST(GCONF_SCHEMA_CONFIG_SOURCE)
+ AC_MSG_RESULT([Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation])
-# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+ if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then
+ GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas'
+ fi
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+ AC_ARG_WITH([gconf-schema-file-dir],
+ AC_HELP_STRING([--with-gconf-schema-file-dir=dir],
+ [Directory for installing schema files.]),
+ [GCONF_SCHEMA_FILE_DIR="$withval"],)
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory. The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run. This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-# fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-# fails if $ac_aux_dir is absolute,
-# fails when called from a subdirectory in a VPATH build with
-# a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-# MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH. The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
+ AC_SUBST(GCONF_SCHEMA_FILE_DIR)
+ AC_MSG_RESULT([Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files])
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
+ AC_ARG_ENABLE(schemas-install,
+ AC_HELP_STRING([--disable-schemas-install],
+ [Disable the schemas installation]),
+ [case ${enableval} in
+ yes|no) ;;
+ *) AC_MSG_ERROR([bad value ${enableval} for --enable-schemas-install]) ;;
+ esac])
+ AM_CONDITIONAL([GCONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no])
])
-# AM_CONDITIONAL -*- Autoconf -*-
+# gnome-common.m4
+#
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+dnl GNOME_COMMON_INIT
-# serial 9
+AC_DEFUN([GNOME_COMMON_INIT],
+[
+ dnl this macro should come after AC_CONFIG_MACRO_DIR
+ AC_BEFORE([AC_CONFIG_MACRO_DIR], [$0])
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
- AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
+ dnl ensure that when the Automake generated makefile calls aclocal,
+ dnl it honours the $ACLOCAL_FLAGS environment variable
+ ACLOCAL_AMFLAGS="\${ACLOCAL_FLAGS}"
+ if test -n "$ac_macro_dir"; then
+ ACLOCAL_AMFLAGS="-I $ac_macro_dir $ACLOCAL_AMFLAGS"
+ fi
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+ AC_SUBST([ACLOCAL_AMFLAGS])
+])
-# serial 10
+AC_DEFUN([GNOME_DEBUG_CHECK],
+[
+ AC_ARG_ENABLE([debug],
+ AC_HELP_STRING([--enable-debug],
+ [turn on debugging]),,
+ [enable_debug=no])
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+ if test x$enable_debug = xyes ; then
+ AC_DEFINE(GNOME_ENABLE_DEBUG, 1,
+ [Enable additional debugging at the expense of performance and size])
+ fi
+])
+dnl GNOME_MAINTAINER_MODE_DEFINES ()
+dnl define DISABLE_DEPRECATED
+dnl
+AC_DEFUN([GNOME_MAINTAINER_MODE_DEFINES],
+[
+ AC_REQUIRE([AM_MAINTAINER_MODE])
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
+ DISABLE_DEPRECATED=""
+ if test $USE_MAINTAINER_MODE = yes; then
+ DOMAINS="G ATK PANGO GDK GDK_PIXBUF GTK GCONF BONOBO BONOBO_UI GNOME LIBGLADE VTE GNOME_VFS WNCK LIBSOUP"
+ for DOMAIN in $DOMAINS; do
+ DISABLE_DEPRECATED="$DISABLE_DEPRECATED -D${DOMAIN}_DISABLE_DEPRECATED -D${DOMAIN}_DISABLE_SINGLE_INCLUDES"
+ done
+ fi
-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
- [$1], CXX, [depcc="$CXX" am_compiler_list=],
- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], UPC, [depcc="$UPC" am_compiler_list=],
- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
+ AC_SUBST(DISABLE_DEPRECATED)
+])
-AC_CACHE_CHECK([dependency style of $depcc],
- [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
+dnl GNOME_COMPILE_WARNINGS
+dnl Turn on many useful compiler warnings
+dnl For now, only works on GCC
+AC_DEFUN([GNOME_COMPILE_WARNINGS],[
+ dnl ******************************
+ dnl More compiler warnings
+ dnl ******************************
- am_cv_$1_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
- fi
- am__universal=false
- m4_case([$1], [CC],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac],
- [CXX],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac])
+ AC_ARG_ENABLE(compile-warnings,
+ AC_HELP_STRING([--enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@],
+ [Turn on compiler warnings]),,
+ [enable_compile_warnings="m4_default([$1],[yes])"])
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+ warnCFLAGS=
+ if test "x$GCC" != xyes; then
+ enable_compile_warnings=no
+ fi
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvisualcpp | msvcmsys)
- # This compiler won't grok `-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
+ warning_flags=
+ realsave_CFLAGS="$CFLAGS"
+
+ case "$enable_compile_warnings" in
+ no)
+ warning_flags=
+ ;;
+ minimum)
+ warning_flags="-Wall"
+ ;;
+ yes)
+ warning_flags="-Wall -Wmissing-prototypes"
+ ;;
+ maximum|error)
+ warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith"
+ CFLAGS="$warning_flags $CFLAGS"
+ for option in -Wno-sign-compare; do
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $option"
+ AC_MSG_CHECKING([whether gcc understands $option])
+ AC_TRY_COMPILE([], [],
+ has_option=yes,
+ has_option=no,)
+ CFLAGS="$SAVE_CFLAGS"
+ AC_MSG_RESULT($has_option)
+ if test $has_option = yes; then
+ warning_flags="$warning_flags $option"
+ fi
+ unset has_option
+ unset SAVE_CFLAGS
+ done
+ unset option
+ if test "$enable_compile_warnings" = "error" ; then
+ warning_flags="$warning_flags -Werror"
+ fi
+ ;;
+ *)
+ AC_MSG_ERROR(Unknown argument '$enable_compile_warnings' to --enable-compile-warnings)
+ ;;
esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_$1_dependencies_compiler_type=$depmode
- break
- fi
+ CFLAGS="$realsave_CFLAGS"
+ AC_MSG_CHECKING(what warning flags to pass to the C compiler)
+ AC_MSG_RESULT($warning_flags)
+
+ AC_ARG_ENABLE(iso-c,
+ AC_HELP_STRING([--enable-iso-c],
+ [Try to warn if code is not ISO C ]),,
+ [enable_iso_c=no])
+
+ AC_MSG_CHECKING(what language compliance flags to pass to the C compiler)
+ complCFLAGS=
+ if test "x$enable_iso_c" != "xno"; then
+ if test "x$GCC" = "xyes"; then
+ case " $CFLAGS " in
+ *[\ \ ]-ansi[\ \ ]*) ;;
+ *) complCFLAGS="$complCFLAGS -ansi" ;;
+ esac
+ case " $CFLAGS " in
+ *[\ \ ]-pedantic[\ \ ]*) ;;
+ *) complCFLAGS="$complCFLAGS -pedantic" ;;
+ esac
+ fi
fi
- done
+ AC_MSG_RESULT($complCFLAGS)
- cd ..
- rm -rf conftest.dir
-else
- am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+ WARN_CFLAGS="$warning_flags $complCFLAGS"
+ AC_SUBST(WARN_CFLAGS)
])
+dnl For C++, do basically the same thing.
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
+AC_DEFUN([GNOME_CXX_WARNINGS],[
+ AC_ARG_ENABLE(cxx-warnings,
+ AC_HELP_STRING([--enable-cxx-warnings=@<:@no/minimum/yes@:>@]
+ [Turn on compiler warnings.]),,
+ [enable_cxx_warnings="m4_default([$1],[minimum])"])
+ AC_MSG_CHECKING(what warning flags to pass to the C++ compiler)
+ warnCXXFLAGS=
+ if test "x$GXX" != xyes; then
+ enable_cxx_warnings=no
+ fi
+ if test "x$enable_cxx_warnings" != "xno"; then
+ if test "x$GXX" = "xyes"; then
+ case " $CXXFLAGS " in
+ *[\ \ ]-Wall[\ \ ]*) ;;
+ *) warnCXXFLAGS="-Wall -Wno-unused" ;;
+ esac
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[ --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-])
+ ## -W is not all that useful. And it cannot be controlled
+ ## with individual -Wno-xxx flags, unlike -Wall
+ if test "x$enable_cxx_warnings" = "xyes"; then
+ warnCXXFLAGS="$warnCXXFLAGS -Wshadow -Woverloaded-virtual"
+ fi
+ fi
+ fi
+ AC_MSG_RESULT($warnCXXFLAGS)
-# Generate code to set up dependency tracking. -*- Autoconf -*-
+ AC_ARG_ENABLE(iso-cxx,
+ AC_HELP_STRING([--enable-iso-cxx],
+ [Try to warn if code is not ISO C++ ]),,
+ [enable_iso_cxx=no])
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+ AC_MSG_CHECKING(what language compliance flags to pass to the C++ compiler)
+ complCXXFLAGS=
+ if test "x$enable_iso_cxx" != "xno"; then
+ if test "x$GXX" = "xyes"; then
+ case " $CXXFLAGS " in
+ *[\ \ ]-ansi[\ \ ]*) ;;
+ *) complCXXFLAGS="$complCXXFLAGS -ansi" ;;
+ esac
-#serial 5
+ case " $CXXFLAGS " in
+ *[\ \ ]-pedantic[\ \ ]*) ;;
+ *) complCXXFLAGS="$complCXXFLAGS -pedantic" ;;
+ esac
+ fi
+ fi
+ AC_MSG_RESULT($complCXXFLAGS)
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
- # Autoconf 2.62 quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
- done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+ WARN_CXXFLAGS="$CXXFLAGS $warnCXXFLAGS $complCXXFLAGS"
+ AC_SUBST(WARN_CXXFLAGS)
+])
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
+m4_define([_LT_COPYING], [dnl
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+# This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
])
-# Do all the work for Automake. -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+# serial 56 LT_INIT
-# serial 16
-# This macro actually does too much. Some checks are only needed if
-# your package does certain things. But this isn't really a big deal.
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+ [m4_default([$3],
+ [m4_fatal([Libtool version $1 or higher is required],
+ 63)])],
+ [$2])])
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out. PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition. After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
-dnl Autoconf wants to disallow AM_ names. We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
- fi
-fi
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-AC_SUBST([CYGPATH_W])
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+ *\ * | *\ *)
+ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_CC],
- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_CXX],
- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES(OBJC)],
- [define([AC_PROG_OBJC],
- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
-])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
- [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated. The stamp files are numbered to have different names.
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $_am_arg | $_am_arg:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+_LT_SETUP
-# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
- *)
- install_sh="\${SHELL} $am_aux_dir/install-sh"
- esac
-fi
-AC_SUBST(install_sh)])
-
-# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
-# Check whether the underlying file-system supports filenames
-# with a leading dot. For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
-# From Jim Meyering
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+])
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-# serial 5
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
-# AM_MAINTAINER_MODE([DEFAULT-MODE])
-# ----------------------------------
-# Control maintainer-specific portions of Makefiles.
-# Default is to disable them, unless `enable' is passed literally.
-# For symmetry, `disable' may be passed as well. Anyway, the user
-# can override the default with the --enable/--disable switch.
-AC_DEFUN([AM_MAINTAINER_MODE],
-[m4_case(m4_default([$1], [disable]),
- [enable], [m4_define([am_maintainer_other], [disable])],
- [disable], [m4_define([am_maintainer_other], [enable])],
- [m4_define([am_maintainer_other], [enable])
- m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
-AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])
- dnl maintainer-mode's default is 'disable' unless 'enable' is passed
- AC_ARG_ENABLE([maintainer-mode],
-[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful
- (and sometimes confusing) to the casual installer],
- [USE_MAINTAINER_MODE=$enableval],
- [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
- AC_MSG_RESULT([$USE_MAINTAINER_MODE])
- AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
- MAINT=$MAINTAINER_MODE_TRUE
- AC_SUBST([MAINT])dnl
-]
-)
-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-# Check to see how 'make' treats includes. -*- Autoconf -*-
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
-# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+_LT_CHECK_OBJDIR
-# serial 4
+m4_require([_LT_TAG_COMPILER])dnl
+_LT_PROG_ECHO_BACKSLASH
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
;;
esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-# serial 6
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
+# Global variables:
+ofile=libtool
+can_build_shared=yes
-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
- [[\\/$]]* | ?:[[\\/]]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ _LT_PATH_MAGIC
+ fi
+ ;;
esac
-])
-# Helper functions for option handling. -*- Autoconf -*-
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
-# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-# serial 4
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME. Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-# Check to make sure that the build environment is sane. -*- Autoconf -*-
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+ [$1
+])])])
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
-# serial 5
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name. Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
- *[[\\\"\#\$\&\'\`$am_lf]]*)
- AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
- *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
- AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
-esac
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+ [$1
+])])])
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- rm -f conftest.file
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-alias in your environment])
- fi
- test "$[2]" = conftest.file
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries. This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
- AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
-# Copyright (C) 2006, 2008 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-# serial 2
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-# AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-# Check how to create a tarball. -*- Autoconf -*-
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME. Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+ [m4_ifval([$1], [$1], [$2])])
+ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+ m4_ifval([$4],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+ lt_dict_add_subkey([lt_decl_dict], [$2],
+ [tagged?], [m4_ifval([$5], [yes], [no])])])
+])
-# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-# serial 2
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-# tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-# $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
- [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
-
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
-
- # tar/untar a dummy directory, and stop if the command works
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008 Free Software Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-m4_define([_LT_COPYING], [dnl
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008 Free Software Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
-#
-# This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+ [0], [m4_fatal([$0: too few arguments: $#])],
+ [1], [m4_fatal([$0: too few arguments: $#: $1])],
+ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+ [lt_dict_filter([lt_decl_dict], $@)])[]dnl
])
-# serial 56 LT_INIT
-
-
-# LT_PREREQ(VERSION)
-# ------------------
-# Complain and exit if this libtool version is less that VERSION.
-m4_defun([LT_PREREQ],
-[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
- [m4_default([$3],
- [m4_fatal([Libtool version $1 or higher is required],
- 63)])],
- [$2])])
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
-# _LT_CHECK_BUILDDIR
-# ------------------
-# Complain if the absolute build directory name contains unusual characters
-m4_defun([_LT_CHECK_BUILDDIR],
-[case `pwd` in
- *\ * | *\ *)
- AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
-esac
-])
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
-# LT_INIT([OPTIONS])
-# ------------------
-AC_DEFUN([LT_INIT],
-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
-AC_BEFORE([$0], [LT_LANG])dnl
-AC_BEFORE([$0], [LT_OUTPUT])dnl
-AC_BEFORE([$0], [LTDL_INIT])dnl
-m4_require([_LT_CHECK_BUILDDIR])dnl
-dnl Autoconf doesn't catch unexpanded LT_ macros by default:
-m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
-m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
-dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
-dnl unless we require an AC_DEFUNed macro:
-AC_REQUIRE([LTOPTIONS_VERSION])dnl
-AC_REQUIRE([LTSUGAR_VERSION])dnl
-AC_REQUIRE([LTVERSION_VERSION])dnl
-AC_REQUIRE([LTOBSOLETE_VERSION])dnl
-m4_require([_LT_PROG_LTMAIN])dnl
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
-dnl Parse OPTIONS
-_LT_SET_OPTIONS([$0], [$1])
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_if([$2], [],
+ m4_quote(lt_decl_varnames),
+ m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-_LT_SETUP
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'. VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
-# Only expand once:
-m4_define([LT_INIT])
-])# LT_INIT
-# Old names:
-AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
-AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
-dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly. In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
-m4_defun([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
- case $cc_temp in
- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
])
-# _LT_FILEUTILS_DEFAULTS
-# ----------------------
-# It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
-m4_defun([_LT_FILEUTILS_DEFAULTS],
-[: ${CP="cp -f"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-])# _LT_FILEUTILS_DEFAULTS
-
-
-# _LT_SETUP
-# ---------
-m4_defun([_LT_SETUP],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-_LT_DECL([], [host_alias], [0], [The host system])dnl
-_LT_DECL([], [host], [0])dnl
-_LT_DECL([], [host_os], [0])dnl
-dnl
-_LT_DECL([], [build_alias], [0], [The build system])dnl
-_LT_DECL([], [build], [0])dnl
-_LT_DECL([], [build_os], [0])dnl
-dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([LT_PATH_LD])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-test -z "$LN_S" && LN_S="ln -s"
-_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
-dnl
-AC_REQUIRE([LT_CMD_MAX_LEN])dnl
-_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
-_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
-dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
-m4_require([_LT_CMD_RELOAD])dnl
-m4_require([_LT_CHECK_MAGIC_METHOD])dnl
-m4_require([_LT_CMD_OLD_ARCHIVE])dnl
-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-
-_LT_CONFIG_LIBTOOL_INIT([
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
-fi
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+# # Some comment about what VAR is for.
+# visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+ [description])))[]dnl
+m4_pushdef([_libtool_name],
+ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+ [0], [_libtool_name=[$]$1],
+ [1], [_libtool_name=$lt_[]$1],
+ [2], [_libtool_name=$lt_[]$1],
+ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
])
-if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
-fi
-_LT_CHECK_OBJDIR
-m4_require([_LT_TAG_COMPILER])dnl
-_LT_PROG_ECHO_BACKSLASH
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
-case $host_os in
-aix3*)
- # AIX sometimes has problems with the GCC collect2 program. For some
- # reason, if we set the COLLECT_NAMES environment variable, the problems
- # vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
- fi
- ;;
-esac
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'. Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+ dnl If the libtool generation code has been placed in $CONFIG_LT,
+ dnl instead of duplicating it all over again into config.status,
+ dnl then we will have config.status run $CONFIG_LT later, so it
+ dnl needs to know what name is stored there:
+ [AC_CONFIG_COMMANDS([libtool],
+ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+ dnl If the libtool generation code is destined for config.status,
+ dnl expand the accumulated commands and init code now:
+ [AC_CONFIG_COMMANDS([libtool],
+ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
-# Global variables:
-ofile=libtool
-can_build_shared=yes
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
-# Set sane defaults for various variables
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$LD" && LD=ld
-test -z "$ac_objext" && ac_objext=o
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
-_LT_CC_BASENAME([$compiler])
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
-# Only perform the check for file, if the check method requires it
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- _LT_PATH_MAGIC
- fi
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\[$]0 --fallback-echo"')dnl "
+ lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
;;
esac
-# Use C for the default configuration in the libtool script
-LT_SUPPORTED_TAG([CC])
-_LT_LANG_C_CONFIG
-_LT_LANG_DEFAULT_CONFIG
-_LT_CONFIG_COMMANDS
-])# _LT_SETUP
+_LT_OUTPUT_LIBTOOL_INIT
+])
-# _LT_PROG_LTMAIN
-# ---------------
-# Note that this code is called both from `configure', and `config.status'
-# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
-# so we pass a copy along to make sure it has a sensible value anyway.
-m4_defun([_LT_PROG_LTMAIN],
-[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
-_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
-ltmain="$ac_aux_dir/ltmain.sh"
-])# _LT_PROG_LTMAIN
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+cat >"$CONFIG_LT" <<_LTEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate a libtool stub with the current configuration.
+lt_cl_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_LTEOF
+cat >>"$CONFIG_LT" <<\_LTEOF
+AS_SHELL_SANITIZE
+_AS_PREPARE
-# So that we can recreate a full libtool script including additional
-# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
-# label.
+exec AS_MESSAGE_FD>&1
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+ echo
+ AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
-# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
-# ----------------------------------------
-# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-m4_define([_LT_CONFIG_LIBTOOL_INIT],
-[m4_ifval([$1],
- [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
- [$1
-])])])
+Usage: $[0] [[OPTIONS]]
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+Report bugs to <bug-libtool@gnu.org>."
-# _LT_CONFIG_LIBTOOL([COMMANDS])
-# ------------------------------
-# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-m4_define([_LT_CONFIG_LIBTOOL],
-[m4_ifval([$1],
- [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
- [$1
-])])])
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
-
-
-# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
-# -----------------------------------------------------
-m4_defun([_LT_CONFIG_SAVE_COMMANDS],
-[_LT_CONFIG_LIBTOOL([$1])
-_LT_CONFIG_LIBTOOL_INIT([$2])
-])
-
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
-# _LT_FORMAT_COMMENT([COMMENT])
-# -----------------------------
-# Add leading comment marks to the start of each line, and a trailing
-# full-stop to the whole comment if one is not present already.
-m4_define([_LT_FORMAT_COMMENT],
-[m4_ifval([$1], [
-m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
- [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
-)])
+Copyright (C) 2008 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+while test $[#] != 0
+do
+ case $[1] in
+ --version | --v* | -V )
+ echo "$lt_cl_version"; exit 0 ;;
+ --help | --h* | -h )
+ echo "$lt_cl_help"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --quiet | --q* | --silent | --s* | -q )
+ lt_cl_silent=: ;;
+ -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+ *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+ esac
+ shift
+done
+if $lt_cl_silent; then
+ exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
-# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
-# -------------------------------------------------------------------
-# CONFIGNAME is the name given to the value in the libtool script.
-# VARNAME is the (base) name used in the configure script.
-# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
-# VARNAME. Any other value will be used directly.
-m4_define([_LT_DECL],
-[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
- [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
- [m4_ifval([$1], [$1], [$2])])
- lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
- m4_ifval([$4],
- [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
- lt_dict_add_subkey([lt_decl_dict], [$2],
- [tagged?], [m4_ifval([$5], [yes], [no])])])
-])
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
-# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
-# --------------------------------------------------------
-m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure. Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+if test "$no_create" != yes; then
+ lt_cl_success=:
+ test "$silent" = yes &&
+ lt_config_lt_args="$lt_config_lt_args --quiet"
+ exec AS_MESSAGE_LOG_FD>/dev/null
+ $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+ exec AS_MESSAGE_LOG_FD>>config.log
+ $lt_cl_success || AS_EXIT(1)
+fi
+])# LT_OUTPUT
-# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-m4_define([lt_decl_tag_varnames],
-[_lt_decl_filter([tagged?], [yes], $@)])
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars. Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+ m4_if(_LT_TAG, [C], [
+ # See if we are running on zsh, and set the options which allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+ fi
+ cfgfile="${ofile}T"
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
-# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
-# ---------------------------------------------------------
-m4_define([_lt_decl_filter],
-[m4_case([$#],
- [0], [m4_fatal([$0: too few arguments: $#])],
- [1], [m4_fatal([$0: too few arguments: $#: $1])],
- [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
- [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
- [lt_dict_filter([lt_decl_dict], $@)])[]dnl
-])
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
-# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
-# --------------------------------------------------
-m4_define([lt_decl_quote_varnames],
-[_lt_decl_filter([value], [1], $@)])
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+_LT_EOF
-# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-m4_define([lt_decl_dquote_varnames],
-[_lt_decl_filter([value], [2], $@)])
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+ _LT_PROG_LTMAIN
-# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-m4_define([lt_decl_varnames_tagged],
-[m4_assert([$# <= 2])dnl
-_$0(m4_quote(m4_default([$1], [[, ]])),
- m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
- m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
-m4_define([_lt_decl_varnames_tagged],
-[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+ _LT_PROG_XSI_SHELLFNS
-# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-m4_define([lt_decl_all_varnames],
-[_$0(m4_quote(m4_default([$1], [[, ]])),
- m4_if([$2], [],
- m4_quote(lt_decl_varnames),
- m4_quote(m4_shift($@))))[]dnl
-])
-m4_define([_lt_decl_all_varnames],
-[lt_join($@, lt_decl_varnames_tagged([$1],
- lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
-])
+ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
-# _LT_CONFIG_STATUS_DECLARE([VARNAME])
-# ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'. VARNAME
-# must have a single quote delimited value for this to work.
-m4_define([_LT_CONFIG_STATUS_DECLARE],
-[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ TIMESTAMP='$TIMESTAMP'
+ RM='$RM'
+ ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
-# _LT_CONFIG_STATUS_DECLARATIONS
-# ------------------------------
-# We delimit libtool config variables with single quotes, so when
-# we write them to config.status, we have to be sure to quote all
-# embedded single quotes properly. In configure, this macro expands
-# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
-#
-# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
-m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
-[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
- [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+# autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
-# _LT_LIBTOOL_TAGS
-# ----------------
-# Output comment and list of tags supported by the script
-m4_defun([_LT_LIBTOOL_TAGS],
-[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
-available_tags="_LT_TAGS"dnl
-])
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
-# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
-# -----------------------------------
-# Extract the dictionary values for VARNAME (optionally with TAG) and
-# expand to a commented shell variable setting:
-#
-# # Some comment about what VAR is for.
-# visible_name=$lt_internal_name
-m4_define([_LT_LIBTOOL_DECLARE],
-[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
- [description])))[]dnl
-m4_pushdef([_libtool_name],
- m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
-m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
- [0], [_libtool_name=[$]$1],
- [1], [_libtool_name=$lt_[]$1],
- [2], [_libtool_name=$lt_[]$1],
- [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
-m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
-])
-
-
-# _LT_LIBTOOL_CONFIG_VARS
-# -----------------------
-# Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
-# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
-# section) are produced by _LT_LIBTOOL_TAG_VARS.
-m4_defun([_LT_LIBTOOL_CONFIG_VARS],
-[m4_foreach([_lt_var],
- m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
- [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
-
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+ [C], [_LT_LANG(C)],
+ [C++], [_LT_LANG(CXX)],
+ [Java], [_LT_LANG(GCJ)],
+ [Fortran 77], [_LT_LANG(F77)],
+ [Fortran], [_LT_LANG(FC)],
+ [Windows Resource], [_LT_LANG(RC)],
+ [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+ [_LT_LANG($1)],
+ [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
-# _LT_LIBTOOL_TAG_VARS(TAG)
-# -------------------------
-m4_define([_LT_LIBTOOL_TAG_VARS],
-[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
- [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+ [LT_SUPPORTED_TAG([$1])dnl
+ m4_append([_LT_TAGS], [$1 ])dnl
+ m4_define([_LT_LANG_]$1[_enabled], [])dnl
+ _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
-# _LT_TAGVAR(VARNAME, [TAGNAME])
-# ------------------------------
-m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [LT_LANG(CXX)],
+ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
-# _LT_CONFIG_COMMANDS
-# -------------------
-# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
-# variables for single and double quote escaping we saved from calls
-# to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'. Finally, any additional code accumulated
-# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
-m4_defun([_LT_CONFIG_COMMANDS],
-[AC_PROVIDE_IFELSE([LT_OUTPUT],
- dnl If the libtool generation code has been placed in $CONFIG_LT,
- dnl instead of duplicating it all over again into config.status,
- dnl then we will have config.status run $CONFIG_LT later, so it
- dnl needs to know what name is stored there:
- [AC_CONFIG_COMMANDS([libtool],
- [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
- dnl If the libtool generation code is destined for config.status,
- dnl expand the accumulated commands and init code now:
- [AC_CONFIG_COMMANDS([libtool],
- [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
-])#_LT_CONFIG_COMMANDS
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+ [LT_LANG(F77)],
+ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+ [LT_LANG(FC)],
+ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
-[
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [m4_ifdef([AC_PROG_GCJ],
+ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([A][M_PROG_GCJ],
+ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([LT_PROG_GCJ],
+ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+ [LT_LANG(RC)],
+ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
-sed_quote_subst='$sed_quote_subst'
-double_quote_subst='$double_quote_subst'
-delay_variable_subst='$delay_variable_subst'
-_LT_CONFIG_STATUS_DECLARATIONS
-LTCC='$LTCC'
-LTCFLAGS='$LTCFLAGS'
-compiler='$compiler_DEFAULT'
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
-# Quote evaled strings.
-for var in lt_decl_all_varnames([[ \
-]], lt_decl_quote_varnames); do
- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
- *[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
- ;;
- *)
- eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
- ;;
- esac
-done
-# Double-quote double-evaled strings.
-for var in lt_decl_all_varnames([[ \
-]], lt_decl_dquote_varnames); do
- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
- *[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
- ;;
- *)
- eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
- ;;
- esac
-done
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
-# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_ECHO in
-*'\\\[$]0 --fallback-echo"')dnl "
- lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
- ;;
-esac
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
-_LT_OUTPUT_LIBTOOL_INIT
-])
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-# LT_OUTPUT
-# ---------
-# This macro allows early generation of the libtool script (before
-# AC_OUTPUT is called), incase it is used in configure for compilation
-# tests.
-AC_DEFUN([LT_OUTPUT],
-[: ${CONFIG_LT=./config.lt}
-AC_MSG_NOTICE([creating $CONFIG_LT])
-cat >"$CONFIG_LT" <<_LTEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate a libtool stub with the current configuration.
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_TAG_COMPILER
-lt_cl_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_LTEOF
-cat >>"$CONFIG_LT" <<\_LTEOF
-AS_SHELL_SANITIZE
-_AS_PREPARE
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
-exec AS_MESSAGE_FD>&1
-exec AS_MESSAGE_LOG_FD>>config.log
-{
- echo
- AS_BOX([Running $as_me.])
-} >&AS_MESSAGE_LOG_FD
-lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
-for use in further configure time tests before the real libtool is
-generated.
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
-Usage: $[0] [[OPTIONS]]
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+ case $host_os in
+ rhapsody* | darwin*)
+ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+ AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+ AC_CHECK_TOOL([LIPO], [lipo], [:])
+ AC_CHECK_TOOL([OTOOL], [otool], [:])
+ AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+ _LT_DECL([], [DSYMUTIL], [1],
+ [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+ _LT_DECL([], [NMEDIT], [1],
+ [Tool to change global to local symbols on Mac OS X])
+ _LT_DECL([], [LIPO], [1],
+ [Tool to manipulate fat objects and archives on Mac OS X])
+ _LT_DECL([], [OTOOL], [1],
+ [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+ _LT_DECL([], [OTOOL64], [1],
+ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
- -h, --help print this help, then exit
- -V, --version print version number, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
-
-Report bugs to <bug-libtool@gnu.org>."
+ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+ [lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi])
+ AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+ [lt_cv_ld_exported_symbols_list],
+ [lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [lt_cv_ld_exported_symbols_list=yes],
+ [lt_cv_ld_exported_symbols_list=no])
+ LDFLAGS="$save_LDFLAGS"
+ ])
+ case $host_os in
+ rhapsody* | darwin1.[[012]])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+])
-lt_cl_version="\
-m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
-m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
-configured by $[0], generated by m4_PACKAGE_STRING.
-Copyright (C) 2008 Free Software Foundation, Inc.
-This config.lt script is free software; the Free Software Foundation
-gives unlimited permision to copy, distribute and modify it."
+# _LT_DARWIN_LINKER_FEATURES
+# --------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+ m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=echo
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ m4_if([$1], [CXX],
+[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+ fi
+],[])
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+])
-while test $[#] != 0
-do
- case $[1] in
- --version | --v* | -V )
- echo "$lt_cl_version"; exit 0 ;;
- --help | --h* | -h )
- echo "$lt_cl_help"; exit 0 ;;
- --debug | --d* | -d )
- debug=: ;;
- --quiet | --q* | --silent | --s* | -q )
- lt_cl_silent=: ;;
+# _LT_SYS_MODULE_PATH_AIX
+# -----------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi],[])
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+])# _LT_SYS_MODULE_PATH_AIX
- -*) AC_MSG_ERROR([unrecognized option: $[1]
-Try \`$[0] --help' for more information.]) ;;
- *) AC_MSG_ERROR([unrecognized argument: $[1]
-Try \`$[0] --help' for more information.]) ;;
- esac
- shift
-done
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[ifdef([AC_DIVERSION_NOTICE],
+ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+ [AC_DIVERT_PUSH(NOTICE)])
+$1
+AC_DIVERT_POP
+])# _LT_SHELL_INIT
-if $lt_cl_silent; then
- exec AS_MESSAGE_FD>/dev/null
-fi
-_LTEOF
-cat >>"$CONFIG_LT" <<_LTEOF
-_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
-_LTEOF
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[_LT_SHELL_INIT([
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
-cat >>"$CONFIG_LT" <<\_LTEOF
-AC_MSG_NOTICE([creating $ofile])
-_LT_OUTPUT_LIBTOOL_COMMANDS
-AS_EXIT(0)
-_LTEOF
-chmod +x "$CONFIG_LT"
+case X$lt_ECHO in
+X*--fallback-echo)
+ # Remove one level of quotation (which was required for Make).
+ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+ ;;
+esac
-# configure is writing to config.log, but config.lt does its own redirection,
-# appending to config.log, which fails on DOS, as config.log is still kept
-# open by configure. Here we exec the FD to /dev/null, effectively closing
-# config.log, so it can be properly (re)opened and appended to by config.lt.
-if test "$no_create" != yes; then
- lt_cl_success=:
- test "$silent" = yes &&
- lt_config_lt_args="$lt_config_lt_args --quiet"
- exec AS_MESSAGE_LOG_FD>/dev/null
- $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
- exec AS_MESSAGE_LOG_FD>>config.log
- $lt_cl_success || AS_EXIT(1)
+ECHO=${lt_ECHO-echo}
+if test "X[$]1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X[$]1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+ # Yippee, $ECHO works!
+ :
+else
+ # Restart under the correct shell.
+ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
fi
-])# LT_OUTPUT
-
-
-# _LT_CONFIG(TAG)
-# ---------------
-# If TAG is the built-in tag, create an initial libtool script with a
-# default configuration from the untagged config vars. Otherwise add code
-# to config.status for appending the configuration named by TAG from the
-# matching tagged config vars.
-m4_defun([_LT_CONFIG],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-_LT_CONFIG_SAVE_COMMANDS([
- m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
- m4_if(_LT_TAG, [C], [
- # See if we are running on zsh, and set the options which allow our
- # commands through without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- cfgfile="${ofile}T"
- trap "$RM \"$cfgfile\"; exit 1" 1 2 15
- $RM "$cfgfile"
+if test "X[$]1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<_LT_EOF
+[$]*
+_LT_EOF
+ exit 0
+fi
- cat <<_LT_EOF >> "$cfgfile"
-#! $SHELL
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-_LT_COPYING
-_LT_LIBTOOL_TAGS
-
-# ### BEGIN LIBTOOL CONFIG
-_LT_LIBTOOL_CONFIG_VARS
-_LT_LIBTOOL_TAG_VARS
-# ### END LIBTOOL CONFIG
-
-_LT_EOF
-
- case $host_os in
- aix3*)
- cat <<\_LT_EOF >> "$cfgfile"
-# AIX sometimes has problems with the GCC collect2 program. For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
-fi
-_LT_EOF
- ;;
- esac
-
- _LT_PROG_LTMAIN
-
- # We use sed instead of cat because bash on DJGPP gets confused if
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
- || (rm -f "$cfgfile"; exit 1)
-
- _LT_PROG_XSI_SHELLFNS
+if test -z "$lt_ECHO"; then
+ if test "X${echo_test_string+set}" != Xset; then
+ # find a string as large as possible, as long as the shell can cope with it
+ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+ if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+ then
+ break
+ fi
+ done
+ fi
- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
- || (rm -f "$cfgfile"; exit 1)
+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ :
+ else
+ # The Solaris, AIX, and Digital Unix default echo programs unquote
+ # backslashes. This makes it impossible to quote backslashes using
+ # echo "$something" | sed 's/\\/\\\\/g'
+ #
+ # So, first we look for a working echo in the user's PATH.
- mv -f "$cfgfile" "$ofile" ||
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
-],
-[cat <<_LT_EOF >> "$ofile"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for dir in $PATH /usr/ucb; do
+ IFS="$lt_save_ifs"
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$dir/echo"
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
-dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
-dnl in a comment (ie after a #).
-# ### BEGIN LIBTOOL TAG CONFIG: $1
-_LT_LIBTOOL_TAG_VARS(_LT_TAG)
-# ### END LIBTOOL TAG CONFIG: $1
-_LT_EOF
-])dnl /m4_if
-],
-[m4_if([$1], [], [
- PACKAGE='$PACKAGE'
- VERSION='$VERSION'
- TIMESTAMP='$TIMESTAMP'
- RM='$RM'
- ofile='$ofile'], [])
-])dnl /_LT_CONFIG_SAVE_COMMANDS
-])# _LT_CONFIG
+ if test "X$ECHO" = Xecho; then
+ # We didn't find a better echo, so look for alternatives.
+ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # This shell has a builtin print -r that does the trick.
+ ECHO='print -r'
+ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+ test "X$CONFIG_SHELL" != X/bin/ksh; then
+ # If we have ksh, try running configure again with it.
+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+ export ORIGINAL_CONFIG_SHELL
+ CONFIG_SHELL=/bin/ksh
+ export CONFIG_SHELL
+ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+ else
+ # Try using printf.
+ ECHO='printf %s\n'
+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # Cool, printf works
+ :
+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+ export CONFIG_SHELL
+ SHELL="$CONFIG_SHELL"
+ export SHELL
+ ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+ else
+ # maybe with a smaller string...
+ prev=:
+ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+ then
+ break
+ fi
+ prev="$cmd"
+ done
-# LT_SUPPORTED_TAG(TAG)
-# ---------------------
-# Trace this macro to discover what tags are supported by the libtool
-# --tag option, using:
-# autoconf --trace 'LT_SUPPORTED_TAG:$1'
-AC_DEFUN([LT_SUPPORTED_TAG], [])
+ if test "$prev" != 'sed 50q "[$]0"'; then
+ echo_test_string=`eval $prev`
+ export echo_test_string
+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+ else
+ # Oops. We lost completely, so just stick with echo.
+ ECHO=echo
+ fi
+ fi
+ fi
+ fi
+ fi
+fi
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+ lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+fi
-# C support is built-in for now
-m4_define([_LT_LANG_C_enabled], [])
-m4_define([_LT_TAGS], [])
+AC_SUBST(lt_ECHO)
+])
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1],
+ [An echo program that does not interpret backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
-# LT_LANG(LANG)
-# -------------
-# Enable libtool support for the given language if not already enabled.
-AC_DEFUN([LT_LANG],
-[AC_BEFORE([$0], [LT_OUTPUT])dnl
-m4_case([$1],
- [C], [_LT_LANG(C)],
- [C++], [_LT_LANG(CXX)],
- [Java], [_LT_LANG(GCJ)],
- [Fortran 77], [_LT_LANG(F77)],
- [Fortran], [_LT_LANG(FC)],
- [Windows Resource], [_LT_LANG(RC)],
- [m4_ifdef([_LT_LANG_]$1[_CONFIG],
- [_LT_LANG($1)],
- [m4_fatal([$0: unsupported language: "$1"])])])dnl
-])# LT_LANG
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+ [AS_HELP_STRING([--disable-libtool-lock],
+ [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
-# _LT_LANG(LANGNAME)
-# ------------------
-m4_defun([_LT_LANG],
-[m4_ifdef([_LT_LANG_]$1[_enabled], [],
- [LT_SUPPORTED_TAG([$1])dnl
- m4_append([_LT_TAGS], [$1 ])dnl
- m4_define([_LT_LANG_]$1[_enabled], [])dnl
- _LT_LANG_$1_CONFIG($1)])dnl
-])# _LT_LANG
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_LANG_PUSH(C)
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+ AC_LANG_POP])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+sparc*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
-# _LT_LANG_DEFAULT_CONFIG
-# -----------------------
-m4_defun([_LT_LANG_DEFAULT_CONFIG],
-[AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [LT_LANG(CXX)],
- [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
-AC_PROVIDE_IFELSE([AC_PROG_F77],
- [LT_LANG(F77)],
- [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
-AC_PROVIDE_IFELSE([AC_PROG_FC],
- [LT_LANG(FC)],
- [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[AC_CHECK_TOOL(AR, ar, false)
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1])
-dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
-dnl pulling things in needlessly.
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],
- [LT_LANG(GCJ)],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
- [LT_LANG(GCJ)],
- [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
- [LT_LANG(GCJ)],
- [m4_ifdef([AC_PROG_GCJ],
- [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
- m4_ifdef([A][M_PROG_GCJ],
- [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
- m4_ifdef([LT_PROG_GCJ],
- [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
-AC_PROVIDE_IFELSE([LT_PROG_RC],
- [LT_LANG(RC)],
- [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
-])# _LT_LANG_DEFAULT_CONFIG
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+ [Commands used to install an old-style archive])
-# Obsolete macros:
-AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
-AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
-AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
-AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
-dnl AC_DEFUN([AC_LIBTOOL_F77], [])
-dnl AC_DEFUN([AC_LIBTOOL_FC], [])
-dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+ [Commands used to build an old-style archive])
+])# _LT_CMD_OLD_ARCHIVE
-# _LT_TAG_COMPILER
-# ----------------
-m4_defun([_LT_TAG_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
-_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
-_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
-_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$3"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ fi
+ $RM conftest*
+])
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
+if test x"[$]$2" = xyes; then
+ m4_if([$5], , :, [$5])
+else
+ m4_if([$6], , :, [$6])
+fi
+])# _LT_COMPILER_OPTION
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
-# Allow CC to be a program name with arguments.
-compiler=$CC
-])# _LT_TAG_COMPILER
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $3"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&AS_MESSAGE_LOG_FD
+ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ else
+ $2=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+])
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-m4_defun([_LT_COMPILER_BOILERPLATE],
-[m4_require([_LT_DECL_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$RM conftest*
-])# _LT_COMPILER_BOILERPLATE
+if test x"[$]$2" = xyes; then
+ m4_if([$4], , :, [$4])
+else
+ m4_if([$5], , :, [$5])
+fi
+])# _LT_LINKER_OPTION
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-m4_defun([_LT_LINKER_BOILERPLATE],
-[m4_require([_LT_DECL_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$RM -r conftest*
-])# _LT_LINKER_BOILERPLATE
-# _LT_REQUIRED_DARWIN_CHECKS
-# -------------------------
-m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
- case $host_os in
- rhapsody* | darwin*)
- AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
- AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
- AC_CHECK_TOOL([LIPO], [lipo], [:])
- AC_CHECK_TOOL([OTOOL], [otool], [:])
- AC_CHECK_TOOL([OTOOL64], [otool64], [:])
- _LT_DECL([], [DSYMUTIL], [1],
- [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
- _LT_DECL([], [NMEDIT], [1],
- [Tool to change global to local symbols on Mac OS X])
- _LT_DECL([], [LIPO], [1],
- [Tool to manipulate fat objects and archives on Mac OS X])
- _LT_DECL([], [OTOOL], [1],
- [ldd/readelf like tool for Mach-O binaries on Mac OS X])
- _LT_DECL([], [OTOOL64], [1],
- [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+ i=0
+ teststring="ABCD"
- AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
- [lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
- # By default we will add the -single_module flag. You can override
- # by either setting the environment variable LT_MULTI_MODULE
- # non-empty at configure time, or by adding -multi_module to the
- # link flags.
- rm -rf libconftest.dylib*
- echo "int foo(void){return 1;}" > conftest.c
- echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
--dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
- -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
- _lt_result=$?
- if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
- lt_cv_apple_cc_single_mod=yes
- else
- cat conftest.err >&AS_MESSAGE_LOG_FD
- fi
- rm -rf libconftest.dylib*
- rm -f conftest.*
- fi])
- AC_CACHE_CHECK([for -exported_symbols_list linker flag],
- [lt_cv_ld_exported_symbols_list],
- [lt_cv_ld_exported_symbols_list=no
- save_LDFLAGS=$LDFLAGS
- echo "_main" > conftest.sym
- LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
- [lt_cv_ld_exported_symbols_list=yes],
- [lt_cv_ld_exported_symbols_list=no])
- LDFLAGS="$save_LDFLAGS"
- ])
- case $host_os in
- rhapsody* | darwin1.[[012]])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
- darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- darwin*) # darwin 5.x on
- # if running on 10.5 or later, the deployment target defaults
- # to the OS version, if on x86, and 10.4, the deployment
- # target defaults to 10.4. Don't you love it?
- case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
- 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[[012]]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- 10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- esac
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
;;
- esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
- _lt_dar_single_mod='$single_module'
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
else
- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ lt_cv_sys_max_cmd_len=32768
fi
- if test "$DSYMUTIL" != ":"; then
- _lt_dsymutil='~$DSYMUTIL $lib || :'
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
- _lt_dsymutil=
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+ = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
fi
;;
esac
])
+if test -n $lt_cv_sys_max_cmd_len ; then
+ AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+ AC_MSG_RESULT(none)
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+ [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
-# _LT_DARWIN_LINKER_FEATURES
-# --------------------------
-# Checks for linker and compiler features on darwin
-m4_defun([_LT_DARWIN_LINKER_FEATURES],
-[
- m4_require([_LT_REQUIRED_DARWIN_CHECKS])
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_automatic, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_TAGVAR(whole_archive_flag_spec, $1)=''
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
- case $cc_basename in
- ifort*) _lt_dar_can_shared=yes ;;
- *) _lt_dar_can_shared=$GCC ;;
- esac
- if test "$_lt_dar_can_shared" = "yes"; then
- output_verbose_link_cmd=echo
- _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
- m4_if([$1], [CXX],
-[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
- _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
- fi
-],[])
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
-])
-# _LT_SYS_MODULE_PATH_AIX
-# -----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-m4_defun([_LT_SYS_MODULE_PATH_AIX],
-[m4_require([_LT_DECL_SED])dnl
-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_SYS_MODULE_PATH_AIX
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
-# _LT_SHELL_INIT(ARG)
-# -------------------
-m4_define([_LT_SHELL_INIT],
-[ifdef([AC_DIVERSION_NOTICE],
- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
- [AC_DIVERT_PUSH(NOTICE)])
-$1
-AC_DIVERT_POP
-])# _LT_SHELL_INIT
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+ [$4]
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+[#line __oline__ "configure"
+#include "confdefs.h"
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
-# _LT_PROG_ECHO_BACKSLASH
-# -----------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-m4_defun([_LT_PROG_ECHO_BACKSLASH],
-[_LT_SHELL_INIT([
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
+#include <stdio.h>
-case X$lt_ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
- ;;
-esac
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
-ECHO=${lt_ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X[$]1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
- # Yippee, $ECHO works!
- :
-else
- # Restart under the correct shell.
- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
-if test "X[$]1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<_LT_EOF
-[$]*
-_LT_EOF
- exit 0
-fi
+void fnord() { int i=42;}
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
-if test -z "$lt_ECHO"; then
- if test "X${echo_test_string+set}" != Xset; then
- # find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
- { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
- then
- break
- fi
- done
+ return status;
+}]
+_LT_EOF
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) $1 ;;
+ x$lt_dlneed_uscore) $2 ;;
+ x$lt_dlunknown|x*) $3 ;;
+ esac
+ else :
+ # compilation failed
+ $3
fi
+fi
+rm -fr conftest*
+])# _LT_TRY_DLOPEN_SELF
- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
- else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- ECHO="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
- if test "X$ECHO" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- ECHO='print -r'
- elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
- else
- # Try using printf.
- ECHO='printf %s\n'
- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
- if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
-
- if test "$prev" != 'sed 50q "[$]0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
- else
- # Oops. We lost completely, so just stick with echo.
- ECHO=echo
- fi
- fi
- fi
- fi
- fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-lt_ECHO=$ECHO
-if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
- lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
-AC_SUBST(lt_ECHO)
-])
-_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
-_LT_DECL([], [ECHO], [1],
- [An echo program that does not interpret backslashes])
-])# _LT_PROG_ECHO_BACKSLASH
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+ darwin*)
+ # if libdl is installed we need to link against it
+ AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ])
+ ;;
-# _LT_ENABLE_LOCK
-# ---------------
-m4_defun([_LT_ENABLE_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
- [AS_HELP_STRING([--disable-libtool-lock],
- [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+ *)
+ AC_CHECK_FUNC([shl_load],
+ [lt_cv_dlopen="shl_load"],
+ [AC_CHECK_LIB([dld], [shl_load],
+ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+ [AC_CHECK_FUNC([dlopen],
+ [lt_cv_dlopen="dlopen"],
+ [AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+ [AC_CHECK_LIB([svld], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+ [AC_CHECK_LIB([dld], [dld_link],
+ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+ ])
+ ])
+ ])
+ ])
+ ])
+ ;;
+ esac
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.$ac_objext` in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
- esac
- else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
fi
- rm -rf conftest*
- ;;
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.o` in
- *32-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_i386_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
- ;;
- ppc64-*linux*|powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_x86_64_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- ppc*-*linux*|powerpc*-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*|s390*-*tpf*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_LANG_PUSH(C)
- AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
- AC_LANG_POP])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-sparc*-*solaris*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.o` in
- *64-bit*)
- case $lt_cv_prog_gnu_ld in
- yes*) LD="${LD-ld} -m elf64_sparc" ;;
- *)
- if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
- LD="${LD-ld} -64"
- fi
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-esac
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-need_locks="$enable_libtool_lock"
-])# _LT_ENABLE_LOCK
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+ AC_CACHE_CHECK([whether a program can dlopen itself],
+ lt_cv_dlopen_self, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+ ])
-# _LT_CMD_OLD_ARCHIVE
-# -------------------
-m4_defun([_LT_CMD_OLD_ARCHIVE],
-[AC_CHECK_TOOL(AR, ar, false)
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-_LT_DECL([], [AR], [1], [The archiver])
-_LT_DECL([], [AR_FLAGS], [1])
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+ lt_cv_dlopen_self_static, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
+ ])
+ fi
-AC_CHECK_TOOL(STRIP, strip, :)
-test -z "$STRIP" && STRIP=:
-_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-test -z "$RANLIB" && RANLIB=:
-_LT_DECL([], [RANLIB], [1],
- [Commands used to install an old-style archive])
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
- case $host_os in
- openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
- ;;
- *)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
- ;;
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi
-_LT_DECL([], [old_postinstall_cmds], [2])
-_LT_DECL([], [old_postuninstall_cmds], [2])
-_LT_TAGDECL([], [old_archive_cmds], [2],
- [Commands used to build an old-style archive])
-])# _LT_CMD_OLD_ARCHIVE
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+ [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+ [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+ [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
-# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([_LT_COMPILER_OPTION],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
- [$2=no
- m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$3"
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$lt_compile" 2>conftest.err)
+ (eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
- cat conftest.err >&AS_MESSAGE_LOG_FD
+ cat out/conftest.err >&AS_MESSAGE_LOG_FD
echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
- if (exit $ac_status) && test -s "$ac_outfile"; then
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- $2=yes
+ # So say no if there are warnings
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
fi
fi
+ chmod u+w . 2>&AS_MESSAGE_LOG_FD
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
$RM conftest*
])
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+ [Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
-if test x"[$]$2" = xyes; then
- m4_if([$5], , :, [$5])
-else
- m4_if([$6], , :, [$6])
-fi
-])# _LT_COMPILER_OPTION
-# Old name:
-AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
+hard_links="nottested"
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ AC_MSG_CHECKING([if we can lock with hard links])
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ AC_MSG_RESULT([$hard_links])
+ if test "$hard_links" = no; then
+ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
-# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------
-# Check whether the given linker option works
-AC_DEFUN([_LT_LINKER_OPTION],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
- [$2=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $3"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&AS_MESSAGE_LOG_FD
- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- $2=yes
- fi
- else
- $2=yes
- fi
- fi
- $RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
-])
-if test x"[$]$2" = xyes; then
- m4_if([$4], , :, [$4])
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
else
- m4_if([$5], , :, [$5])
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
fi
-])# _LT_LINKER_OPTION
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+_LT_DECL([], [objdir], [0],
+ [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+ [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
-# Old name:
-AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+ test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
-# LT_CMD_MAX_LEN
-#---------------
-AC_DEFUN([LT_CMD_MAX_LEN],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
- i=0
- teststring="ABCD"
+ # We can hardcode non-existent directories.
+ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+ # Linking always hardcodes the temporary library directory.
+ _LT_TAGVAR(hardcode_action, $1)=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ _LT_TAGVAR(hardcode_action, $1)=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ _LT_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
- case $build_os in
- msdosdjgpp*)
- # On DJGPP, this test can blow up pretty badly due to problems in libc
- # (any single argument exceeding 2000 bytes causes a buffer overrun
- # during glob expansion). Even if it were fixed, the result of this
- # check would be larger than it should be.
- lt_cv_sys_max_cmd_len=12288; # 12K is about right
- ;;
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+_LT_TAGDECL([], [hardcode_action], [0],
+ [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
- gnu*)
- # Under GNU Hurd, this test is not required because there is
- # no limit to the length of command line arguments.
- # Libtool will interpret -1 as no limit whatsoever
- lt_cv_sys_max_cmd_len=-1;
- ;;
- cygwin* | mingw* | cegcc*)
- # On Win9x/ME, this test blows up -- it succeeds, but takes
- # about 5 minutes as the teststring grows exponentially.
- # Worse, since 9x/ME are not pre-emptively multitasking,
- # you end up with a "frozen" computer, even though with patience
- # the test eventually succeeds (with a max line length of 256k).
- # Instead, let's just punt: use the minimum linelength reported by
- # all of the supported platforms: 8192 (on NT/2K/XP).
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- amigaos*)
- # On AmigaOS with pdksh, this test takes hours, literally.
- # So we just punt and use a minimum line length of 8192.
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
- # This has been around since 386BSD, at least. Likely further.
- if test -x /sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
- elif test -x /usr/sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
- else
- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
- fi
- # And add a safety zone
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- ;;
-
- interix*)
- # We know the value 262144 and hardcode it with a safety zone (like BSD)
- lt_cv_sys_max_cmd_len=196608
- ;;
-
- osf*)
- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
- # nice to cause kernel panics so lets avoid the loop below.
- # First set a reasonable default.
- lt_cv_sys_max_cmd_len=16384
- #
- if test -x /sbin/sysconfig; then
- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
- *1*) lt_cv_sys_max_cmd_len=-1 ;;
- esac
- fi
- ;;
- sco3.2v5*)
- lt_cv_sys_max_cmd_len=102400
- ;;
- sysv5* | sco5v6* | sysv4.2uw2*)
- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
- if test -n "$kargmax"; then
- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ AC_MSG_RESULT([yes])
else
- lt_cv_sys_max_cmd_len=32768
+ AC_MSG_RESULT([no])
fi
;;
*)
- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- else
- # Make teststring a little bigger before we do anything with it.
- # a 1K string should be a reasonable start.
- for i in 1 2 3 4 5 6 7 8 ; do
- teststring=$teststring$teststring
- done
- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
- # If test is not a shell built-in, we'll probably end up computing a
- # maximum length that is only half of the actual maximum length, but
- # we can't tell.
- while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
- = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
- test $i != 17 # 1/2 MB should be enough
- do
- i=`expr $i + 1`
- teststring=$teststring$teststring
- done
- # Only check the string length outside the loop.
- lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
- teststring=
- # Add a significant safety factor because C++ compilers can tack on
- # massive amounts of additional arguments before passing them to the
- # linker. It appears as though 1/2 is a usable value.
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
- fi
+ AC_MSG_RESULT([no])
;;
esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
- AC_MSG_RESULT(none)
fi
-max_cmd_len=$lt_cv_sys_max_cmd_len
-_LT_DECL([], [max_cmd_len], [0],
- [What is the maximum length of a command?])
-])# LT_CMD_MAX_LEN
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
-
-
-# _LT_HEADER_DLFCN
-# ----------------
-m4_defun([_LT_HEADER_DLFCN],
-[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
-])# _LT_HEADER_DLFCN
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
-# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ----------------------------------------------------------------
-m4_defun([_LT_TRY_DLOPEN_SELF],
-[m4_require([_LT_HEADER_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
- [$4]
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+ [], [
+if test "$GCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<_LT_EOF
-[#line __oline__ "configure"
-#include "confdefs.h"
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
-#include <stdio.h>
+case $host_os in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL DL_GLOBAL
-# else
-# define LT_DLGLOBAL 0
-# endif
-#endif
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
-
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- /* dlclose (self); */
- }
+aix[[4-9]]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
else
- puts (dlerror ());
-
- return status;
-}]
-_LT_EOF
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) $1 ;;
- x$lt_dlneed_uscore) $2 ;;
- x$lt_dlunknown|x*) $3 ;;
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[[01]] | aix4.[[01]].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
esac
- else :
- # compilation failed
- $3
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
fi
-fi
-rm -fr conftest*
-])# _LT_TRY_DLOPEN_SELF
+ ;;
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
-# LT_SYS_DLOPEN_SELF
-# ------------------
-AC_DEFUN([LT_SYS_DLOPEN_SELF],
-[m4_require([_LT_HEADER_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
- enable_dlopen=unknown
- enable_dlopen_self=unknown
- enable_dlopen_self_static=unknown
-else
- lt_cv_dlopen=no
- lt_cv_dlopen_libs=
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
- case $host_os in
- beos*)
- lt_cv_dlopen="load_add_on"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ;;
+bsdi[[45]]*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
- mingw* | pw32* | cegcc*)
- lt_cv_dlopen="LoadLibrary"
- lt_cv_dlopen_libs=
- ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
- cygwin*)
- lt_cv_dlopen="dlopen"
- lt_cv_dlopen_libs=
- ;;
+ case $GCC,$host_os in
+ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
- darwin*)
- # if libdl is installed we need to link against it
- AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
- lt_cv_dlopen="dyld"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ])
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+ # It is most probably a Windows format PATH printed by
+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
+ # path with ; separators, and with drive letters. We can handle the
+ # drive letters (cygwin fileutils understands them), so leave them,
+ # especially as we might pass files found there to a mingw objdump,
+ # which wouldn't understand a cygwinified path. Ahh.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
;;
*)
- AC_CHECK_FUNC([shl_load],
- [lt_cv_dlopen="shl_load"],
- [AC_CHECK_LIB([dld], [shl_load],
- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
- [AC_CHECK_FUNC([dlopen],
- [lt_cv_dlopen="dlopen"],
- [AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
- [AC_CHECK_LIB([svld], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
- [AC_CHECK_LIB([dld], [dld_link],
- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
- ])
- ])
- ])
- ])
- ])
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
esac
+ dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
- enable_dlopen=no
- fi
-
- case $lt_cv_dlopen in
- dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
- save_LDFLAGS="$LDFLAGS"
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
- save_LIBS="$LIBS"
- LIBS="$lt_cv_dlopen_libs $LIBS"
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
- AC_CACHE_CHECK([whether a program can dlopen itself],
- lt_cv_dlopen_self, [dnl
- _LT_TRY_DLOPEN_SELF(
- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
- ])
+freebsd1*)
+ dynamic_linker=no
+ ;;
- if test "x$lt_cv_dlopen_self" = xyes; then
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
- lt_cv_dlopen_self_static, [dnl
- _LT_TRY_DLOPEN_SELF(
- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
- ])
- fi
-
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[[123]]*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
;;
esac
+ ;;
- case $lt_cv_dlopen_self in
- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
- *) enable_dlopen_self=unknown ;;
- esac
+gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ hardcode_into_libs=yes
+ ;;
- case $lt_cv_dlopen_self_static in
- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
- *) enable_dlopen_self_static=unknown ;;
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
esac
-fi
-_LT_DECL([dlopen_support], [enable_dlopen], [0],
- [Whether dlopen is supported])
-_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
- [Whether dlopen of programs is supported])
-_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
- [Whether dlopen of statically linked programs is supported])
-])# LT_SYS_DLOPEN_SELF
+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ postinstall_cmds='chmod 555 $lib'
+ ;;
-# Old name:
-AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+interix[[3-9]]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
-# _LT_COMPILER_C_O([TAGNAME])
-# ---------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler.
-# This macro does not hard code the compiler like AC_PROG_CC_C_O.
-m4_defun([_LT_COMPILER_C_O],
-[m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
- [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
- [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
- $RM -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
- fi
- fi
- chmod u+w . 2>&AS_MESSAGE_LOG_FD
- $RM conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
- $RM out/* && rmdir out
- cd ..
- $RM -r conftest
- $RM conftest*
-])
-_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
- [Does compiler simultaneously support -c and -o options?])
-])# _LT_COMPILER_C_O
+# This must be Linux ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ # Some binutils ld are patched to set DT_RUNPATH
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+ [shlibpath_overrides_runpath=yes])])
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
-# _LT_COMPILER_FILE_LOCKS([TAGNAME])
-# ----------------------------------
-# Check to see if we can do hard links to lock some files if needed
-m4_defun([_LT_COMPILER_FILE_LOCKS],
-[m4_require([_LT_ENABLE_LOCK])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-_LT_COMPILER_C_O([$1])
-
-hard_links="nottested"
-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- AC_MSG_CHECKING([if we can lock with hard links])
- hard_links=yes
- $RM conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- AC_MSG_RESULT([$hard_links])
- if test "$hard_links" = no; then
- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
- need_locks=warn
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
-else
- need_locks=no
-fi
-_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
-])# _LT_COMPILER_FILE_LOCKS
-
-
-# _LT_CHECK_OBJDIR
-# ----------------
-m4_defun([_LT_CHECK_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
- lt_cv_objdir=.libs
-else
- # MS-DOS does not allow filenames that begin with a dot.
- lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-_LT_DECL([], [objdir], [0],
- [The name of the directory that contains temporary libtool files])dnl
-m4_pattern_allow([LT_OBJDIR])dnl
-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
- [Define to the sub-directory in which libtool stores uninstalled libraries.])
-])# _LT_CHECK_OBJDIR
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
-# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
-# --------------------------------------
-# Check hardcoding attributes.
-m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
- test -n "$_LT_TAGVAR(runpath_var, $1)" ||
- test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+netbsdelf*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='NetBSD ld.elf_so'
+ ;;
- # We can hardcode non-existent directories.
- if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
- test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
- # Linking always hardcodes the temporary library directory.
- _LT_TAGVAR(hardcode_action, $1)=relink
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- _LT_TAGVAR(hardcode_action, $1)=immediate
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- _LT_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
- test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-_LT_TAGDECL([], [hardcode_action], [0],
- [How to hardcode a shared library path into an executable])
-])# _LT_LINKER_HARDCODE_LIBPATH
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
-# _LT_CMD_STRIPLIB
-# ----------------
-m4_defun([_LT_CMD_STRIPLIB],
-[m4_require([_LT_DECL_EGREP])
-striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
- AC_MSG_RESULT([yes])
-else
-# FIXME - insert some real tests, host_os isn't really good enough
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
case $host_os in
- darwin*)
- if test -n "$STRIP" ; then
- striplib="$STRIP -x"
- old_striplib="$STRIP -S"
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
- fi
- ;;
- *)
- AC_MSG_RESULT([no])
- ;;
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
esac
-fi
-_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
-_LT_DECL([], [striplib], [1])
-])# _LT_CMD_STRIPLIB
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[[89]] | openbsd2.[[89]].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
-# _LT_SYS_DYNAMIC_LINKER([TAG])
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-m4_defun([_LT_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_OBJDUMP])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_MSG_CHECKING([dynamic linker characteristics])
-m4_if([$1],
- [], [
-if test "$GCC" = yes; then
- case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
- esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
- else
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
fi
- # Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
- lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
- for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
- test -d "$lt_sys_path" && \
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
- fi
- done
- lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
- for (lt_i = NF; lt_i > 0; lt_i--) {
- if ($lt_i != "" && $lt_i != ".") {
- if ($lt_i == "..") {
- lt_count++;
- } else {
- if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
- } else {
- lt_count--;
- }
- }
- }
- }
- if (lt_foo != "") { lt_freq[[lt_foo]]++; }
- if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
-}'`
- sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
+ need_version=yes
;;
-aix[[4-9]]*)
+sysv4 | sysv4.3*)
version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[[01]] | aix4.[[01]].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- case $host_cpu in
- powerpc)
- # Since July 2007 AmigaOS4 officially supports .so libraries.
- # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- ;;
- m68k)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
esac
;;
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
;;
-bsdi[[45]]*)
- version_type=linux
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32* | cegcc*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname~
- if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
- eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
- fi'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $RM \$dlpath'
- shlibpath_overrides_runpath=yes
-
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw* | cegcc*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- ;;
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
;;
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-m4_if([$1], [],[
- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
;;
-dgux*)
+uts4*)
version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
;;
-freebsd1*)
+*)
dynamic_linker=no
;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[[123]]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[[01]]* | freebsdelf3.[[01]]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
- freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- *) # from 4.6 on, and DragonFly
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
+_LT_DECL([], [variables_saved_for_relink], [1],
+ [Variables whose values should be saved in libtool wrapper scripts and
+ restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+ [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+ [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+ [[List of archive names. First name is the real one, the rest are links.
+ The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+ [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [postinstall_cmds], [2],
+ [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+ [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+ [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+ [[As "finish_cmds", except a single script fragment to be evaled but
+ not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+ [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+ [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+ [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
-interix[[3-9]]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
+# _LT_PATH_TOOL_PREFIX(TOOL)
+# --------------------------
+# find a file program which can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] | ?:[\\/]*])
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word. This closes a longstanding sh security hole.
+ ac_dummy="m4_if([$2], , $PATH, [$2])"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$1; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ AC_MSG_RESULT($MAGIC_CMD)
+else
+ AC_MSG_RESULT(no)
+fi
+_LT_DECL([], [MAGIC_CMD], [0],
+ [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # Some binutils ld are patched to set DT_RUNPATH
- save_LDFLAGS=$LDFLAGS
- save_libdir=$libdir
- eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
- LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
- [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
- [shlibpath_overrides_runpath=yes])])
- LDFLAGS=$save_LDFLAGS
- libdir=$save_libdir
-
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Add ABI-specific directories to the system library path.
- sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
- fi
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
+# _LT_PATH_MAGIC
+# --------------
+# find a file program which can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
+ MAGIC_CMD=:
fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
+fi
+])# _LT_PATH_MAGIC
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-*nto* | *qnx*)
- version_type=qnx
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='ldqnx.so'
- ;;
+# LT_PATH_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
+AC_ARG_WITH([gnu-ld],
+ [AS_HELP_STRING([--with-gnu-ld],
+ [assume the C compiler uses GNU ld @<:@default=no@:>@])],
+ [test "$withval" = no || with_gnu_ld=yes],
+ [with_gnu_ld=no])dnl
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by $CC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[[89]] | openbsd2.[[89]].*)
- shlibpath_overrides_runpath=no
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]]* | ?:[[\\/]]*)
+ re_direlt='/[[^/]][[^/]]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
;;
*)
- shlibpath_overrides_runpath=yes
+ test "$with_gnu_ld" != yes && break
;;
esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
-rdos*)
- dynamic_linker=no
- ;;
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
+*)
+ lt_cv_prog_gnu_ld=no
;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# _LT_PATH_LD_GNU
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
+
+# _LT_CMD_RELOAD
+# --------------
+# find reload flag for linker
+# -- PORTME Some linkers may need a different reload flag.
+m4_defun([_LT_CMD_RELOAD],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+ lt_cv_ld_reload_flag,
+ [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_DECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
+
+
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
+# how to check for library dependencies
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[[4-9]]*)
+ lt_cv_deplibs_check_method=pass_all
;;
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
+beos*)
+ lt_cv_deplibs_check_method=pass_all
;;
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+bsdi[[45]]*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ if ( file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
esac
+ else
+ lt_cv_deplibs_check_method=pass_all
fi
- sys_lib_dlsearch_path_spec='/usr/lib'
;;
-tpf*)
- # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
;;
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
;;
-*)
- dynamic_linker=no
+interix[[3-9]]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-fi
+# This must be Linux ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-_LT_DECL([], [variables_saved_for_relink], [1],
- [Variables whose values should be saved in libtool wrapper scripts and
- restored at link time])
-_LT_DECL([], [need_lib_prefix], [0],
- [Do we need the "lib" prefix for modules?])
-_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
-_LT_DECL([], [version_type], [0], [Library versioning type])
-_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
-_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
-_LT_DECL([], [shlibpath_overrides_runpath], [0],
- [Is shlibpath searched before the hard-coded library search path?])
-_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
-_LT_DECL([], [library_names_spec], [1],
- [[List of archive names. First name is the real one, the rest are links.
- The last name is the one that the linker finds with -lNAME]])
-_LT_DECL([], [soname_spec], [1],
- [[The coded name of the library, if different from the real name]])
-_LT_DECL([], [postinstall_cmds], [2],
- [Command to use after installation of a shared archive])
-_LT_DECL([], [postuninstall_cmds], [2],
- [Command to use after uninstallation of a shared archive])
-_LT_DECL([], [finish_cmds], [2],
- [Commands used to finish a libtool library installation in a directory])
-_LT_DECL([], [finish_eval], [1],
- [[As "finish_cmds", except a single script fragment to be evaled but
- not shown]])
-_LT_DECL([], [hardcode_into_libs], [0],
- [Whether we should hardcode library paths into libraries])
-_LT_DECL([], [sys_lib_search_path_spec], [2],
- [Compile-time system search path for libraries])
-_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
- [Run-time system search path for libraries])
-])# _LT_SYS_DYNAMIC_LINKER
+netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+ fi
+ ;;
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
-# _LT_PATH_TOOL_PREFIX(TOOL)
-# --------------------------
-# find a file program which can recognize shared library
-AC_DEFUN([_LT_PATH_TOOL_PREFIX],
-[m4_require([_LT_DECL_EGREP])dnl
-AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] | ?:[\\/]*])
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
;;
-*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word. This closes a longstanding sh security hole.
- ac_dummy="m4_if([$2], , $PATH, [$2])"
- for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- $EGREP "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<_LT_EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-_LT_EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
- ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- AC_MSG_RESULT($MAGIC_CMD)
-else
- AC_MSG_RESULT(no)
-fi
-_LT_DECL([], [MAGIC_CMD], [0],
- [Used to examine libraries when file_magic_cmd begins with "file"])dnl
-])# _LT_PATH_TOOL_PREFIX
-
-# Old name:
-AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
-
-# _LT_PATH_MAGIC
-# --------------
-# find a file program which can recognize a shared library
-m4_defun([_LT_PATH_MAGIC],
-[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
else
- MAGIC_CMD=:
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
fi
-fi
-])# _LT_PATH_MAGIC
+ ;;
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-# LT_PATH_LD
-# ----------
-# find the pathname to the GNU or non-GNU linker
-AC_DEFUN([LT_PATH_LD],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_DECL_EGREP])dnl
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-AC_ARG_WITH([gnu-ld],
- [AS_HELP_STRING([--with-gnu-ld],
- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
- [test "$withval" = no || with_gnu_ld=yes],
- [with_gnu_ld=no])dnl
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by $CC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [[\\/]]* | ?:[[\\/]]*)
- re_direlt='/[[^/]][[^/]]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
- while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
;;
esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+_LT_DECL([], [deplibs_check_method], [1],
+ [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+ [Command to use when deplibs_check_method == "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
+
+
+# LT_PATH_NM
+# ----------
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+[if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/$lt_tmp_nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
+ : ${lt_cv_path_NM=no}
fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
else
- AC_MSG_RESULT(no)
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
+ AC_SUBST([DUMPBIN])
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-_LT_PATH_LD_GNU
-AC_SUBST([LD])
-
-_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
-])# LT_PATH_LD
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+ [lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
+ cat conftest.out >&AS_MESSAGE_LOG_FD
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*])
+])# LT_PATH_NM
# Old names:
-AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
-AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_PROG_LD], [])
-dnl AC_DEFUN([AC_PROG_LD], [])
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
-# _LT_PATH_LD_GNU
-#- --------------
-m4_defun([_LT_PATH_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
+# LT_LIB_M
+# --------
+# check for math library
+AC_DEFUN([LT_LIB_M],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+ # These system don't have libm, or don't need it
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
;;
*)
- lt_cv_prog_gnu_ld=no
+ AC_CHECK_LIB(m, cos, LIBM="-lm")
;;
-esac])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# _LT_PATH_LD_GNU
+esac
+AC_SUBST([LIBM])
+])# LT_LIB_M
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
-# _LT_CMD_RELOAD
-# --------------
-# find reload flag for linker
-# -- PORTME Some linkers may need a different reload flag.
-m4_defun([_LT_CMD_RELOAD],
-[AC_CACHE_CHECK([for $LD option to reload object files],
- lt_cv_ld_reload_flag,
- [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
- else
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- fi
- ;;
-esac
-_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
-_LT_DECL([], [reload_cmds], [2])dnl
-])# _LT_CMD_RELOAD
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
+
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-# _LT_CHECK_MAGIC_METHOD
+if test "$GCC" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+
+ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+ lt_cv_prog_compiler_rtti_exceptions,
+ [-fno-rtti -fno-exceptions], [],
+ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+ [Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
+
+
+# _LT_CMD_GLOBAL_SYMBOLS
# ----------------------
-# how to check for library dependencies
-# -- PORTME fill in with the dynamic library characteristics
-m4_defun([_LT_CHECK_MAGIC_METHOD],
-[m4_require([_LT_DECL_EGREP])
-m4_require([_LT_DECL_OBJDUMP])
-AC_CACHE_CHECK([how to recognize dependent libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
-case $host_os in
-aix[[4-9]]*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
-bsdi[[45]]*)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-cygwin*)
- # func_win32_libid is a shell function defined in ltmain.sh
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[[BCDT]]'
;;
-
-mingw* | pw32*)
- # Base MSYS/MinGW do not provide the 'file' command needed by
- # func_win32_libid shell function, so use a weaker test based on 'objdump',
- # unless we find 'file', for example because we are cross-compiling.
- if ( file / ) >/dev/null 2>&1; then
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- else
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[[ABCDGISTW]]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[[ABCDEGRST]]'
fi
;;
-
-cegcc)
- # use the weaker test based on 'objdump'. See mingw*.
- lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
+irix* | nonstopux*)
+ symcode='[[BCDEGRST]]'
;;
-
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method=pass_all
+osf*)
+ symcode='[[BCDEGQRST]]'
;;
-
-freebsd* | dragonfly*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
+solaris*)
+ symcode='[[BDRT]]'
;;
-
-gnu*)
- lt_cv_deplibs_check_method=pass_all
+sco3.2v5*)
+ symcode='[[DT]]'
;;
-
-hpux10.20* | hpux11*)
- lt_cv_file_magic_cmd=/usr/bin/file
- case $host_cpu in
- ia64*)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
- ;;
- hppa*64*)
- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
- ;;
- *)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
- esac
+sysv4.2uw2*)
+ symcode='[[DT]]'
;;
-
-interix[[3-9]]*)
- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[[ABDT]]'
;;
-
-irix5* | irix6* | nonstopux*)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- lt_cv_deplibs_check_method=pass_all
+sysv4)
+ symcode='[[DFNSTU]]'
;;
+esac
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- lt_cv_deplibs_check_method=pass_all
- ;;
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[[ABCDGIRSTW]]' ;;
+esac
-netbsd*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
- fi
- ;;
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-newos6*)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
-*nto* | *qnx*)
- lt_cv_deplibs_check_method=pass_all
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
;;
+esac
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK ['"\
+" {last_section=section; section=\$ 3};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx]"
else
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
fi
- ;;
-osf3* | osf4* | osf5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+ # Check to see that the pipe works correctly.
+ pipe_works=no
-rdos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+ if AC_TRY_EVAL(ac_compile); then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
-sysv4 | sysv4.3*)
- case $host_vendor in
- motorola)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- sequent)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
- ;;
- sni)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
- siemens)
- lt_cv_deplibs_check_method=pass_all
- ;;
- pc)
- lt_cv_deplibs_check_method=pass_all
- ;;
- esac
- ;;
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
-tpf*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
+ cat <<_LT_EOF >> conftest.$ac_ext
-_LT_DECL([], [deplibs_check_method], [1],
- [Method to check whether dependent libraries are shared objects])
-_LT_DECL([], [file_magic_cmd], [1],
- [Command to use when deplibs_check_method == "file_magic"])
-])# _LT_CHECK_MAGIC_METHOD
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
-# LT_PATH_NM
-# ----------
-# find the pathname to a BSD- or MS-compatible name lister
-AC_DEFUN([LT_PATH_NM],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
-else
- lt_nm_to_check="${ac_tool_prefix}nm"
- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
- lt_nm_to_check="$lt_nm_to_check nm"
- fi
- for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
- lt_cv_path_NM="$tmp_nm -B"
- break
- ;;
- *)
- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
- */dev/null*)
- lt_cv_path_NM="$tmp_nm -p"
- break
- ;;
- *)
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- ;;
- esac
- ;;
- esac
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_save_LIBS="$LIBS"
+ lt_save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS="$lt_save_LIBS"
+ CFLAGS="$lt_save_CFLAGS"
+ else
+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
fi
- done
- IFS="$lt_save_ifs"
- done
- : ${lt_cv_path_NM=no}
-fi])
-if test "$lt_cv_path_NM" != "no"; then
- NM="$lt_cv_path_NM"
-else
- # Didn't find any BSD compatible name lister, look for dumpbin.
- AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
- AC_SUBST([DUMPBIN])
- if test "$DUMPBIN" != ":"; then
- NM="$DUMPBIN"
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+ cat conftest.$ac_ext >&5
fi
-fi
-test -z "$NM" && NM=nm
-AC_SUBST([NM])
-_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+ rm -rf conftest* conftst*
-AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
- [lt_cv_nm_interface="BSD nm"
- echo "int some_variable = 0;" > conftest.$ac_ext
- (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$ac_compile" 2>conftest.err)
- cat conftest.err >&AS_MESSAGE_LOG_FD
- (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
- (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
- cat conftest.err >&AS_MESSAGE_LOG_FD
- (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
- cat conftest.out >&AS_MESSAGE_LOG_FD
- if $GREP 'External.*some_variable' conftest.out > /dev/null; then
- lt_cv_nm_interface="MS dumpbin"
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
fi
- rm -f conftest*])
-])# LT_PATH_NM
-
-# Old names:
-AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
-AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_PROG_NM], [])
-dnl AC_DEFUN([AC_PROG_NM], [])
-
-
-# LT_LIB_M
-# --------
-# check for math library
-AC_DEFUN([LT_LIB_M],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
- # These system don't have libm, or don't need it
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, cos, LIBM="-lm")
- ;;
-esac
-AC_SUBST([LIBM])
-])# LT_LIB_M
-
-# Old name:
-AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_CHECK_LIBM], [])
-
-
-# _LT_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------
-m4_defun([_LT_COMPILER_NO_RTTI],
-[m4_require([_LT_TAG_COMPILER])dnl
-
-_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-
- _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
- lt_cv_prog_compiler_rtti_exceptions,
- [-fno-rtti -fno-exceptions], [],
- [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ AC_MSG_RESULT(failed)
+else
+ AC_MSG_RESULT(ok)
fi
-_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
- [Compiler flag to turn off builtin functions])
-])# _LT_COMPILER_NO_RTTI
-
-
-# _LT_CMD_GLOBAL_SYMBOLS
-# ----------------------
-m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-AC_REQUIRE([LT_PATH_LD])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Define system-specific variables.
-case $host_os in
-aix*)
- symcode='[[BCDT]]'
- ;;
-cygwin* | mingw* | pw32* | cegcc*)
- symcode='[[ABCDGISTW]]'
- ;;
-hpux*)
- if test "$host_cpu" = ia64; then
- symcode='[[ABCDEGRST]]'
- fi
- ;;
-irix* | nonstopux*)
- symcode='[[BCDEGRST]]'
- ;;
-osf*)
- symcode='[[BCDEGQRST]]'
- ;;
-solaris*)
- symcode='[[BDRT]]'
- ;;
-sco3.2v5*)
- symcode='[[DT]]'
- ;;
-sysv4.2uw2*)
- symcode='[[DT]]'
- ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
- symcode='[[ABDT]]'
- ;;
-sysv4)
- symcode='[[DFNSTU]]'
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
- symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Transform an extracted symbol line into a proper C declaration.
-# Some systems (esp. on ia64) link data and code symbols differently,
-# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
- opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
- ;;
-esac
-
-# Try without a prefix underscore, then with it.
-for ac_symprfx in "" "_"; do
- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
- symxfrm="\\1 $ac_symprfx\\2 \\2"
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+ [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+ [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+ [lt_cv_sys_global_symbol_to_c_name_address], [1],
+ [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+ [Transform the output of nm in a C name address pair when lib prefix is needed])
+]) # _LT_CMD_GLOBAL_SYMBOLS
- # Write the raw and C identifiers.
- if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- # Fake it for dumpbin and say T for any non-static function
- # and D for any global variable.
- # Also find C++ and __fastcall symbols from MSVC++,
- # which start with @ or ?.
- lt_cv_sys_global_symbol_pipe="$AWK ['"\
-" {last_section=section; section=\$ 3};"\
-" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
-" \$ 0!~/External *\|/{next};"\
-" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
-" {if(hide[section]) next};"\
-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
-" ' prfx=^$ac_symprfx]"
- else
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
- fi
- # Check to see that the pipe works correctly.
- pipe_works=no
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
- rm -f conftest*
- cat > conftest.$ac_ext <<_LT_EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(void);
-void nm_test_func(void){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-_LT_EOF
+AC_MSG_CHECKING([for $compiler option to produce PIC])
+m4_if([$1], [CXX], [
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
- if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- else
- rm -f "$nlist"T
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
-
- # Make sure that we snagged all the symbols we need.
- if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
- if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<_LT_EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-_LT_EOF
- # Now generate the symbol file.
- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
-
- cat <<_LT_EOF >> conftest.$ac_ext
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- void *address;
-}
-lt__PROGRAM__LTX_preloaded_symbols[[]] =
-{
- { "@PROGRAM@", (void *) 0 },
-_LT_EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
- cat <<\_LT_EOF >> conftest.$ac_ext
- {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
- return lt__PROGRAM__LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-_LT_EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
- lt_save_LIBS="$LIBS"
- lt_save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
- LIBS="$lt_save_LIBS"
- CFLAGS="$lt_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
- cat conftest.$ac_ext >&5
- fi
- rm -rf conftest* conftst*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
- else
- lt_cv_sys_global_symbol_pipe=
- fi
-done
-])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
- lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
- AC_MSG_RESULT(failed)
-else
- AC_MSG_RESULT(ok)
-fi
-
-_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
- [Take the output of nm and produce a listing of raw symbols and C names])
-_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
- [Transform the output of nm in a proper C declaration])
-_LT_DECL([global_symbol_to_c_name_address],
- [lt_cv_sys_global_symbol_to_c_name_address], [1],
- [Transform the output of nm in a C name address pair])
-_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
- [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
- [Transform the output of nm in a C name address pair when lib prefix is needed])
-]) # _LT_CMD_GLOBAL_SYMBOLS
-
-
-# _LT_COMPILER_PIC([TAGNAME])
-# ---------------------------
-m4_defun([_LT_COMPILER_PIC],
-[m4_require([_LT_TAG_COMPILER])dnl
-_LT_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_TAGVAR(lt_prog_compiler_static, $1)=
-
-AC_MSG_CHECKING([for $compiler option to produce PIC])
-m4_if([$1], [CXX], [
- # C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
+ ;;
amigaos*)
case $host_cpu in
@@ -4681,7 +3958,7 @@ m4_if([$1], [CXX], [
;;
esac
;;
- linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
case $cc_basename in
KCC*)
# KAI C++ Compiler
@@ -4745,7 +4022,7 @@ m4_if([$1], [CXX], [
;;
esac
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
;;
*qnx* | *nto*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
@@ -4965,7 +4242,7 @@ m4_if([$1], [CXX], [
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
- linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
case $cc_basename in
# old Intel for x86_64 which still supported -KPIC.
ecc*)
@@ -5170,6 +4447,9 @@ m4_if([$1], [CXX], [
cygwin* | mingw* | cegcc*)
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
;;
+ linux* | k*bsd*-gnu)
+ _LT_TAGVAR(link_all_deplibs, $1)=no
+ ;;
*)
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
;;
@@ -5234,6 +4514,9 @@ dnl Note also adjust exclude_expsyms for
openbsd*)
with_gnu_ld=no
;;
+ linux* | k*bsd*-gnu)
+ _LT_TAGVAR(link_all_deplibs, $1)=no
+ ;;
esac
_LT_TAGVAR(ld_shlibs, $1)=yes
@@ -5255,6 +4538,7 @@ dnl Note also adjust exclude_expsyms for
fi
supports_anon_versioning=no
case `$LD -v 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
@@ -5276,7 +4560,370 @@ dnl Note also adjust exclude_expsyms for
*** really care for shared libraries, you may want to modify your PATH
*** so that a non-GNU linker is found, and then restart.
-_LT_EOF
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ tmp_sharedflag='--shared' ;;
+ xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+
+ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+ runpath_var=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=no
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
fi
;;
@@ -5295,1351 +4942,1612 @@ _LT_EOF
esac
;;
- beos*)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
+ bsdi[[45]]*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
;;
cygwin* | mingw* | pw32* | cegcc*)
- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(always_export_symbols, $1)=no
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ # FIXME: Should let the user specify the lib program.
+ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ ;;
- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
;;
- interix[[3-9]]*)
- _LT_TAGVAR(hardcode_direct, $1)=no
+ dgux*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ ;;
+
+ freebsd1*)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
- gnu* | linux* | tpf* | k*bsd*-gnu)
- tmp_diet=no
- if test "$host_os" = linux-dietlibc; then
- case $cc_basename in
- diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
- esac
+ hpux10*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
- if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
- then
- tmp_addflag=
- tmp_sharedflag='-shared'
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- lf95*) # Lahey Fortran 8.1
- _LT_TAGVAR(whole_archive_flag_spec, $1)=
- tmp_sharedflag='--shared' ;;
- xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
- tmp_sharedflag='-qmkshrobj'
- tmp_addflag= ;;
esac
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*) # Sun C 5.9
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
- _LT_TAGVAR(compiler_needs_object, $1)=yes
- tmp_sharedflag='-G' ;;
- *Sun\ F*) # Sun Fortran 8.3
- tmp_sharedflag='-G' ;;
+ else
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
esac
- _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ fi
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- if test "x$supports_anon_versioning" = xyes; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- case $cc_basename in
- xlf*)
- # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
- _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
- _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
- fi
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
;;
esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ AC_LINK_IFELSE(int foo(void) {},
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ )
+ LDFLAGS="$save_LDFLAGS"
else
- _LT_TAGVAR(ld_shlibs, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
- solaris*)
- if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
- _LT_TAGVAR(ld_shlibs, $1)=no
- cat <<_LT_EOF 1>&2
+ newsos6)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
+ *nto* | *qnx*)
+ ;;
-_LT_EOF
- elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ else
+ case $host_os in
+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
- _LT_TAGVAR(ld_shlibs, $1)=no
- cat <<_LT_EOF 1>&2
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
+ osf3*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
-_LT_EOF
- ;;
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
*)
- # For security reasons, it is highly recommended that you always
- # use absolute paths for naming shared libraries, and exclude the
- # DT_RUNPATH tag from executables and libraries. But doing so
- # requires that you compile everything twice, which is a pain.
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ ;;
+ motorola)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
;;
esac
+ runpath_var='LD_RUN_PATH'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4.3*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
;;
- sunos4*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- _LT_TAGVAR(hardcode_direct, $1)=yes
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
- *)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- _LT_TAGVAR(ld_shlibs, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
- esac
- if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
- runpath_var=
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(always_export_symbols, $1)=yes
- _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- _LT_TAGVAR(hardcode_direct, $1)=unsupported
- fi
+ uts4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
- aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
- else
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
+ *)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+ [The commands to extract the exported symbol list from a shared archive])
- _LT_TAGVAR(archive_cmds, $1)=''
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+ # Assume -lc should be added
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- if test "$GCC" = yes; then
- case $host_os in aix4.[[012]]|aix4.[[012]].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" &&
- strings "$collect2name" | $GREP resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- _LT_TAGVAR(hardcode_direct, $1)=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $_LT_TAGVAR(archive_cmds, $1) in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- _LT_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an
- # empty executable.
- _LT_SYS_MODULE_PATH_AIX
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
- _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an
- # empty executable.
- _LT_SYS_MODULE_PATH_AIX
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+ then
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ else
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
+ fi
+ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
fi
+ $RM conftest*
+ AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
;;
+ esac
+ fi
+ ;;
+esac
+
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+ [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+ [enable_shared_with_static_runtimes], [0],
+ [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+ [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+ [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+ [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+ [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+ [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+ [Commands used to build a loadable module if different from building
+ a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+ [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+ [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+ [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+ [Flag to hardcode $libdir into a binary during linking.
+ This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
+ [[If ld is used when linking, flag to hardcode $libdir into a binary
+ during linking. This must work even if $libdir does not exist]])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+ [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary and the resulting library dependency is
+ "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+ library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+ [Set to "yes" if building a shared library automatically hardcodes DIR
+ into the library and all subsequent libraries and executables linked
+ against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+ [Set to yes if linker adds runtime paths of dependent libraries
+ to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+ [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [fix_srcfile_path], [1],
+ [Fix the shell variable $srcfile for the compiler])
+_LT_TAGDECL([], [always_export_symbols], [0],
+ [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+ [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+ [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+ [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+ [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [file_list_spec], [1],
+ [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
- amigaos*)
- case $host_cpu in
- powerpc)
- # see comment about AmigaOS4 .so support
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)=''
- ;;
- m68k)
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- ;;
- esac
- ;;
- bsdi[[45]]*)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
- ;;
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
- cygwin* | mingw* | pw32* | cegcc*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
- # FIXME: Should let the user specify the lib program.
- _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
- _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- ;;
+# Source file extension for C test sources.
+ac_ext=c
- darwin* | rhapsody*)
- _LT_DARWIN_LINKER_FEATURES($1)
- ;;
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
- dgux*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
- freebsd1*)
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+ LT_SYS_DLOPEN_SELF
+ _LT_CMD_STRIPLIB
- hpux9*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(hardcode_direct, $1)=yes
+ # Report which library types will actually be built
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- ;;
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
- hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- fi
- ;;
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
- hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
- case $host_cpu in
- hppa*64*|ia64*)
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
- *)
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- ;;
- esac
- fi
- ;;
+ _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- # Try to use the -exported_symbol ld option, if it does not
- # work, assume that -exports_file does not work either and
- # implicitly export all symbols.
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
- AC_LINK_IFELSE(int foo(void) {},
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
- )
- LDFLAGS="$save_LDFLAGS"
- else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
- fi
- _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(inherit_rpath, $1)=yes
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- ;;
- netbsd*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
+# _LT_PROG_CXX
+# ------------
+# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+# compiler, we have our own version here.
+m4_defun([_LT_PROG_CXX],
+[
+pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+AC_PROG_CXX
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ AC_PROG_CXXCPP
+else
+ _lt_caught_CXX_error=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_CXX
- newsos6)
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_CXX], [])
- *nto* | *qnx*)
- ;;
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- else
- case $host_os in
- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[AC_REQUIRE([_LT_PROG_CXX])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
- os2*)
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
- osf3*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
+# Source file extension for C++ test sources.
+ac_ext=cpp
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- else
- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
- # Both c and cxx compiler support -rpath directly
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- fi
- _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="int some_variable = 0;"
- solaris*)
- _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
- else
- case `$CC -V 2>&1` in
- *"Compilers 5.0"*)
- wlarc=''
- _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
- ;;
- *)
- wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
- ;;
- esac
- fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
- # but is careful enough not to reorder.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- else
- _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
- fi
- ;;
- esac
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- ;;
+ # Code to be used in simple link tests
+ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+ lt_save_with_gnu_ld=$with_gnu_ld
+ lt_save_path_LD=$lt_cv_path_LD
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
+ if test -n "$compiler"; then
+ # We don't want -fno-exception when compiling C++ code, so set the
+ # no_builtin_flag separately
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+ else
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+ fi
- sysv4)
- case $host_vendor in
- sni)
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
- _LT_TAGVAR(hardcode_direct, $1)=no
- ;;
- motorola)
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
+ if test "$GXX" = yes; then
+ # Set up default GNU C++ configuration
- sysv4.3*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
- ;;
+ LT_PATH_LD
- sysv4*MP*)
- if test -d /usr/nec; then
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- _LT_TAGVAR(ld_shlibs, $1)=yes
- fi
- ;;
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var='LD_RUN_PATH'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='${wl}'
+
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+ $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
fi
- ;;
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
+ else
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
+ fi
- uts4*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
+ # PORTME: fill in a description of your system's C++ link characteristics
+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ aix_use_runtimelinking=no
- *)
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ ;;
+ esac
- if test x$host_vendor = xsni; then
- case $host in
- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
- ;;
- esac
- fi
- fi
-])
-AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+ if test "$GXX" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to
+ # export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+ _LT_SYS_MODULE_PATH_AIX
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared
+ # libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
-_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
-_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
-_LT_DECL([], [extract_expsyms_cmds], [2],
- [The commands to extract the exported symbol list from a shared archive])
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
-#
-# Do we need to explicitly link libc?
-#
-case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
-x|xyes)
- # Assume -lc should be added
- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $_LT_TAGVAR(archive_cmds, $1) in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
- $RM conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
- pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
- _LT_TAGVAR(allow_undefined_flag, $1)=
- if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
- then
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ _LT_TAGVAR(ld_shlibs, $1)=no
fi
- _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $RM conftest*
- AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
- ;;
- esac
- fi
- ;;
-esac
-
-_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
- [Whether or not to add -lc for building shared libraries])
-_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
- [enable_shared_with_static_runtimes], [0],
- [Whether or not to disallow shared libs when runtime libs are static])
-_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
- [Compiler flag to allow reflexive dlopens])
-_LT_TAGDECL([], [whole_archive_flag_spec], [1],
- [Compiler flag to generate shared objects directly from archives])
-_LT_TAGDECL([], [compiler_needs_object], [1],
- [Whether the compiler copes with passing no objects directly])
-_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
- [Create an old-style archive from a shared archive])
-_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
- [Create a temporary old-style archive to link instead of a shared archive])
-_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
-_LT_TAGDECL([], [archive_expsym_cmds], [2])
-_LT_TAGDECL([], [module_cmds], [2],
- [Commands used to build a loadable module if different from building
- a shared archive.])
-_LT_TAGDECL([], [module_expsym_cmds], [2])
-_LT_TAGDECL([], [with_gnu_ld], [1],
- [Whether we are building with GNU ld or not])
-_LT_TAGDECL([], [allow_undefined_flag], [1],
- [Flag that allows shared libraries with undefined symbols to be built])
-_LT_TAGDECL([], [no_undefined_flag], [1],
- [Flag that enforces no undefined symbols])
-_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
- [Flag to hardcode $libdir into a binary during linking.
- This must work even if $libdir does not exist])
-_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
- [[If ld is used when linking, flag to hardcode $libdir into a binary
- during linking. This must work even if $libdir does not exist]])
-_LT_TAGDECL([], [hardcode_libdir_separator], [1],
- [Whether we need a single "-rpath" flag with a separated argument])
-_LT_TAGDECL([], [hardcode_direct], [0],
- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
- DIR into the resulting binary])
-_LT_TAGDECL([], [hardcode_direct_absolute], [0],
- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
- DIR into the resulting binary and the resulting library dependency is
- "absolute", i.e impossible to change by setting ${shlibpath_var} if the
- library is relocated])
-_LT_TAGDECL([], [hardcode_minus_L], [0],
- [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
- into the resulting binary])
-_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
- [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
- into the resulting binary])
-_LT_TAGDECL([], [hardcode_automatic], [0],
- [Set to "yes" if building a shared library automatically hardcodes DIR
- into the library and all subsequent libraries and executables linked
- against it])
-_LT_TAGDECL([], [inherit_rpath], [0],
- [Set to yes if linker adds runtime paths of dependent libraries
- to runtime path list])
-_LT_TAGDECL([], [link_all_deplibs], [0],
- [Whether libtool must link a program against all its dependency libraries])
-_LT_TAGDECL([], [fix_srcfile_path], [1],
- [Fix the shell variable $srcfile for the compiler])
-_LT_TAGDECL([], [always_export_symbols], [0],
- [Set to "yes" if exported symbols are required])
-_LT_TAGDECL([], [export_symbols_cmds], [2],
- [The commands to list exported symbols])
-_LT_TAGDECL([], [exclude_expsyms], [1],
- [Symbols that should not be listed in the preloaded symbols])
-_LT_TAGDECL([], [include_expsyms], [1],
- [Symbols that must always be exported])
-_LT_TAGDECL([], [prelink_cmds], [2],
- [Commands necessary for linking programs (against libraries) with templates])
-_LT_TAGDECL([], [file_list_spec], [1],
- [Specify filename containing input files])
-dnl FIXME: Not yet implemented
-dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
-dnl [Compiler flag to generate thread safe objects])
-])# _LT_LINKER_SHLIBS
-
+ ;;
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
-# _LT_LANG_C_CONFIG([TAG])
-# ------------------------
-# Ensure that the configuration variables for a C compiler are suitably
-# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_C_CONFIG],
-[m4_require([_LT_DECL_EGREP])dnl
-lt_save_CC="$CC"
-AC_LANG_PUSH(C)
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
-# Source file extension for C test sources.
-ac_ext=c
+ freebsd[[12]]*)
+ # C++ shared libraries reported to be fairly broken before
+ # switch to ELF
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
-# Object file extension for compiled C test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
+ freebsd-elf*)
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ ;;
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
+ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
+ gnu*)
+ ;;
-_LT_TAG_COMPILER
-# Save the default compiler, since it gets overwritten when the other
-# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
-compiler_DEFAULT=$CC
+ hpux9*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
-if test -n "$compiler"; then
- _LT_COMPILER_NO_RTTI($1)
- _LT_COMPILER_PIC($1)
- _LT_COMPILER_C_O($1)
- _LT_COMPILER_FILE_LOCKS($1)
- _LT_LINKER_SHLIBS($1)
- _LT_SYS_DYNAMIC_LINKER($1)
- _LT_LINKER_HARDCODE_LIBPATH($1)
- LT_SYS_DLOPEN_SELF
- _LT_CMD_STRIPLIB
+ hpux10*|hpux11*)
+ if test $with_gnu_ld = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- # Report which library types will actually be built
- AC_MSG_CHECKING([if libtool supports shared libraries])
- AC_MSG_RESULT([$can_build_shared])
+ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+ esac
+ fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
- AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test $with_gnu_ld = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
- # On AIX, shared libraries and static libraries use the same namespace, and
- # are all built from PIC.
- case $host_os in
- aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+ CC*)
+ # SGI C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
- aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
- esac
- AC_MSG_RESULT([$enable_shared])
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+ fi
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+ esac
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ ;;
- AC_MSG_CHECKING([whether to build static libraries])
- # Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
- AC_MSG_RESULT([$enable_static])
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
- _LT_CONFIG($1)
-fi
-AC_LANG_POP
-CC="$lt_save_CC"
-])# _LT_LANG_C_CONFIG
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-# _LT_PROG_CXX
-# ------------
-# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
-# compiler, we have our own version here.
-m4_defun([_LT_PROG_CXX],
-[
-pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
-AC_PROG_CXX
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- AC_PROG_CXXCPP
-else
- _lt_caught_CXX_error=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_CXX
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc* | ecpc* )
+ # Intel C++
+ with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+ *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
+ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+ $RANLIB $oldlib'
+ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ *) # Version 6 will use weak symbols
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ esac
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_CXX], [])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-# _LT_LANG_CXX_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a C++ compiler are suitably
-# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_CXX_CONFIG],
-[AC_REQUIRE([_LT_PROG_CXX])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ ;;
+ xl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
-AC_LANG_PUSH(C++)
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(compiler_needs_object, $1)=no
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+ output_verbose_link_cmd='echo'
-# Source file extension for C++ test sources.
-ac_ext=cpp
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
-# No sense in running all these tests if we already determined that
-# the CXX compiler isn't working. Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
- # Code to be used in simple compile tests
- lt_simple_compile_test_code="int some_variable = 0;"
+ m88k*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
- # Code to be used in simple link tests
- lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
- _LT_TAG_COMPILER
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
- # save warnings/boilerplate of simple test code
- _LT_COMPILER_BOILERPLATE
- _LT_LINKER_BOILERPLATE
+ *nto* | *qnx*)
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
- # Allow CC to be a program name with arguments.
- lt_save_CC=$CC
- lt_save_LD=$LD
- lt_save_GCC=$GCC
- GCC=$GXX
- lt_save_with_gnu_ld=$with_gnu_ld
- lt_save_path_LD=$lt_cv_path_LD
- if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
- else
- $as_unset lt_cv_prog_gnu_ld
- fi
- if test -n "${lt_cv_path_LDCXX+set}"; then
- lt_cv_path_LD=$lt_cv_path_LDCXX
- else
- $as_unset lt_cv_path_LD
- fi
- test -z "${LDCXX+set}" || LD=$LDCXX
- CC=${CXX-"c++"}
- compiler=$CC
- _LT_TAGVAR(compiler, $1)=$CC
- _LT_CC_BASENAME([$compiler])
+ openbsd2*)
+ # C++ shared libraries are fairly broken
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
- if test -n "$compiler"; then
- # We don't want -fno-exception when compiling C++ code, so set the
- # no_builtin_flag separately
- if test "$GXX" = yes; then
- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
- else
- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
- fi
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=echo
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
- if test "$GXX" = yes; then
- # Set up default GNU C++ configuration
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
- LT_PATH_LD
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- # Check if GNU C++ uses GNU ld as the underlying linker, since the
- # archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ case $host in
+ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+ esac
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ cxx*)
+ case $host in
+ osf3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+ $RM $lib.exp'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ ;;
+ esac
- # If archive_cmds runs LD, not CC, wlarc should be empty
- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
- # investigate it a little bit more. (MM)
- wlarc='${wl}'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- # ancient GNU ld didn't support --whole-archive et. al.
- if eval "`$CC -print-prog-name=ld` --help 2>&1" |
- $GREP 'no-whole-archive' > /dev/null; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- _LT_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- else
- with_gnu_ld=no
- wlarc=
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ case $host in
+ osf3*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
- # A generic and very simple default shared library creation
- # command for GNU C++ for the case where it uses the native
- # linker, instead of GNU ld. If possible, this setting should
- # overridden to take advantage of the native linker features on
- # the platform it is being used on.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
- else
- GXX=no
- with_gnu_ld=no
- wlarc=
- fi
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
- # PORTME: fill in a description of your system's C++ link characteristics
- AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
- _LT_TAGVAR(ld_shlibs, $1)=yes
- case $host_os in
- aix3*)
+ psos*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
- aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- aix_use_runtimelinking=no
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
- for ld_flag in $LDFLAGS; do
- case $ld_flag in
- *-brtl*)
- aix_use_runtimelinking=yes
- break
- ;;
- esac
- done
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- _LT_TAGVAR(archive_cmds, $1)=''
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
- if test "$GXX" = yes; then
- case $host_os in aix4.[[012]]|aix4.[[012]].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" &&
- strings "$collect2name" | $GREP resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- _LT_TAGVAR(hardcode_direct, $1)=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=
- fi
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
+ solaris*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to
- # export.
- _LT_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an empty
- # executable.
- _LT_SYS_MODULE_PATH_AIX
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
- _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an
- # empty executable.
- _LT_SYS_MODULE_PATH_AIX
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared
- # libraries.
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
+ output_verbose_link_cmd='echo'
- beos*)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- chorus*)
- case $cc_basename in
+ # The C++ compiler must be used to create the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
+ # GNU C++ compiler with Solaris linker
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ fi
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ ;;
+ esac
+ fi
+ ;;
esac
;;
- cygwin* | mingw* | pw32* | cegcc*)
- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(always_export_symbols, $1)=no
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- darwin* | rhapsody*)
- _LT_DARWIN_LINKER_FEATURES($1)
- ;;
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
- dgux*)
- case $cc_basename in
- ec++*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
- ghcx*)
- # Green Hills C++ Compiler
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
@@ -6650,644 +6558,538 @@ if test "$_lt_caught_CXX_error" != yes;
esac
;;
- freebsd[[12]]*)
- # C++ shared libraries reported to be fairly broken before
- # switch to ELF
+ vxworks*)
+ # FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
- freebsd-elf*)
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
;;
+ esac
+
+ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+ _LT_TAGVAR(GCC, $1)="$GXX"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+ with_gnu_ld=$lt_save_with_gnu_ld
+ lt_cv_path_LDCXX=$lt_cv_path_LD
+ lt_cv_path_LD=$lt_save_path_LD
+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library. It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer*4 a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+ private int a;
+ public void bar (void) {
+ a = 0;
+ }
+};
+_LT_EOF
+])
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+ case $p in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test $p = "-L" ||
+ test $p = "-R"; then
+ prev=$p
+ continue
+ else
+ prev=
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ case $p in
+ -L* | -R*)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+ _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ fi
+ fi
+ ;;
- freebsd* | dragonfly*)
- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
- # conventions
- _LT_TAGVAR(ld_shlibs, $1)=yes
- ;;
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
- gnu*)
- ;;
+ if test "$pre_test_object_deps_done" = no; then
+ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+ _LT_TAGVAR(predep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+ fi
+ else
+ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+ _LT_TAGVAR(postdep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+ fi
+ fi
+ ;;
- hpux9*)
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
- # but as the default
- # location of the library.
+ *) ;; # Ignore the rest.
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- aCC*)
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
- ;;
- *)
- if test "$GXX" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
+ esac
+ done
- hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ # Clean up.
+ rm -f a.out a.exe
+else
+ echo "libtool.m4: error: problem compiling $1 test program"
+fi
- case $host_cpu in
- hppa*64*|ia64*)
- ;;
- *)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- ;;
- esac
- fi
- case $host_cpu in
- hppa*64*|ia64*)
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
- *)
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
- # but as the default
- # location of the library.
- ;;
- esac
+$RM -f confest.$objext
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- aCC*)
- case $host_cpu in
- hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
- ;;
- *)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
- case $host_cpu in
- hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- fi
- else
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
+ # hack all around it, let's just trust "g++" to DTRT.
+ _LT_TAGVAR(predep_objects,$1)=
+ _LT_TAGVAR(postdep_objects,$1)=
+ _LT_TAGVAR(postdeps,$1)=
+ ;;
- interix[[3-9]]*)
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
- irix5* | irix6*)
- case $cc_basename in
- CC*)
- # SGI C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
- # Archives containing C++ object files must be created using
- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
- ;;
- *)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
- fi
- fi
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- ;;
- esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(inherit_rpath, $1)=yes
- ;;
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
- linux* | k*bsd*-gnu)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+solaris*)
+ case $cc_basename in
+ CC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ # Adding this requires a known-good setup of shared libraries for
+ # Sun compiler versions before 5.6, else PIC objects from an old
+ # archive will be linked into the output, leading to subtle bugs.
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+esac
+])
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
- ;;
- icpc* | ecpc* )
- # Intel C++
- with_gnu_ld=yes
- # version 8.0 and above of icpc choke on multiply defined symbols
- # if we add $predep_objects and $postdep_objects, however 7.1 and
- # earlier do not add the objects themselves.
- case `$CC -V 2>&1` in
- *"Version 7."*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- *) # Version 8.0 or newer
- tmp_idyn=
- case $host_cpu in
- ia64*) tmp_idyn=' -i_dynamic';;
- esac
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- esac
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
- ;;
- pgCC* | pgcpp*)
- # Portland Group C++ compiler
- case `$CC -V` in
- *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
- _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
- _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
- $RANLIB $oldlib'
- _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
- ;;
- *) # Version 6 will use weak symbols
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
- ;;
- esac
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+ [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+ [Dependencies to place before and after the objects being linked to
+ create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+ [The library search path used internally by the compiler when linking
+ a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
- ;;
- cxx*)
- # Compaq C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
- runpath_var=LD_RUN_PATH
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+# _LT_PROG_F77
+# ------------
+# Since AC_PROG_F77 is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_F77],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+AC_PROG_F77
+if test -z "$F77" || test "X$F77" = "Xno"; then
+ _lt_disable_F77=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_F77
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
- ;;
- xl*)
- # IBM XL 8.0 on PPC, with GNU ld
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
- _LT_TAGVAR(compiler_needs_object, $1)=yes
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_F77], [])
- # Not sure whether something based on
- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
- # would be better.
- output_verbose_link_cmd='echo'
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
- ;;
- esac
- ;;
- esac
- ;;
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_REQUIRE([_LT_PROG_F77])dnl
+AC_LANG_PUSH(Fortran 77)
- lynxos*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
- m88k*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
+# Source file extension for f77 test sources.
+ac_ext=f
- mvs*)
- case $cc_basename in
- cxx*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
- netbsd*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
- wlarc=
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- fi
- # Workaround some broken pre-1.5 toolchains
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
- ;;
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
- *nto* | *qnx*)
- _LT_TAGVAR(ld_shlibs, $1)=yes
- ;;
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
- openbsd2*)
- # C++ shared libraries are fairly broken
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- fi
- output_verbose_link_cmd=echo
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
- osf3* | osf4* | osf5*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ CC=${F77-"f77"}
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+ GCC=$G77
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
- # Archives containing C++ object files must be created using
- # the KAI C++ compiler.
- case $host in
- osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
- *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
- esac
- ;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- cxx*)
- case $host in
- osf3*)
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- ;;
- *)
- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
- $RM $lib.exp'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- ;;
- esac
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(GCC, $1)="$G77"
+ _LT_TAGVAR(LD, $1)="$LD"
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- case $host in
- osf3*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- ;;
- esac
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
+fi # test "$_lt_disable_F77" != yes
- else
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
- psos*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- lcc*)
- # Lucid
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
+# _LT_PROG_FC
+# -----------
+# Since AC_PROG_FC is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_FC],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+AC_PROG_FC
+if test -z "$FC" || test "X$FC" = "Xno"; then
+ _lt_disable_FC=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_FC
- solaris*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
- _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_FC], [])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
- ;;
- esac
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- output_verbose_link_cmd='echo'
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_REQUIRE([_LT_PROG_FC])dnl
+AC_LANG_PUSH(Fortran)
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
- ;;
- gcx*)
- # Green Hills C++ Compiler
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
- # The C++ compiler must be used to create the archive.
- _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
- ;;
- *)
- # GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
- if $CC --version | $GREP -v '^2\.7' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
- else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
- # platform.
- _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
- fi
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- ;;
- esac
- fi
- ;;
- esac
- ;;
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var='LD_RUN_PATH'
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
- case $cc_basename in
- CC*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ CC=${FC-"f95"}
+ compiler=$CC
+ GCC=$ac_cv_fc_compiler_gnu
- case $cc_basename in
- CC*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
- vxworks*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
- *)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
;;
esac
+ AC_MSG_RESULT([$enable_shared])
- AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
- test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
- _LT_TAGVAR(GCC, $1)="$GXX"
+ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
_LT_TAGVAR(LD, $1)="$LD"
## CAVEAT EMPTOR:
@@ -7302,2033 +7104,2250 @@ if test "$_lt_caught_CXX_error" != yes;
_LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
- _LT_CONFIG($1)
- fi # test -n "$compiler"
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC="$lt_save_CC"
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+ :
+ _LT_CONFIG($1)
+fi
- CC=$lt_save_CC
- LDCXX=$LD
- LD=$lt_save_LD
- GCC=$lt_save_GCC
- with_gnu_ld=$lt_save_with_gnu_ld
- lt_cv_path_LDCXX=$lt_cv_path_LD
- lt_cv_path_LD=$lt_save_path_LD
- lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
- lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# _LT_LANG_RC_CONFIG
-AC_LANG_POP
-])# _LT_LANG_CXX_CONFIG
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+ [AC_CHECK_TOOL(GCJ, gcj,)
+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ AC_SUBST(GCJFLAGS)])])[]dnl
+])
-# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
-# ---------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-# Dependencies to place before and after the object being linked:
-_LT_TAGVAR(predep_objects, $1)=
-_LT_TAGVAR(postdep_objects, $1)=
-_LT_TAGVAR(predeps, $1)=
-_LT_TAGVAR(postdeps, $1)=
-_LT_TAGVAR(compiler_lib_search_path, $1)=
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library. It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
-int a;
-void foo (void) { a = 0; }
-_LT_EOF
-], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
-class Foo
-{
-public:
- Foo (void) { a = 0; }
-private:
- int a;
-};
-_LT_EOF
-], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
- subroutine foo
- implicit none
- integer*4 a
- a=0
- return
- end
-_LT_EOF
-], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
- subroutine foo
- implicit none
- integer a
- a=0
- return
- end
-_LT_EOF
-], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
-public class foo {
- private int a;
- public void bar (void) {
- a = 0;
- }
-};
-_LT_EOF
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
])
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
- # Parse the compiler output and extract the necessary
- # objects, libraries and library flags.
- # Sentinel used to keep track of whether or not we are before
- # the conftest object file.
- pre_test_object_deps_done=no
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
- for p in `eval "$output_verbose_link_cmd"`; do
- case $p in
- -L* | -R* | -l*)
- # Some compilers place space between "-{L,R}" and the path.
- # Remove the space.
- if test $p = "-L" ||
- test $p = "-R"; then
- prev=$p
- continue
- else
- prev=
- fi
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
- if test "$pre_test_object_deps_done" = no; then
- case $p in
- -L* | -R*)
- # Internal compiler library paths should come after those
- # provided the user. The postdeps already come after the
- # user supplied libs so there is no need to process them.
- if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
- _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
- else
- _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
- fi
- ;;
- # The "-l" case would never come before the object being
- # linked, so don't bother handling this case.
- esac
- else
- if test -z "$_LT_TAGVAR(postdeps, $1)"; then
- _LT_TAGVAR(postdeps, $1)="${prev}${p}"
- else
- _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
- fi
- fi
- ;;
- *.$objext)
- # This assumes that the test object file only shows up
- # once in the compiler output.
- if test "$p" = "conftest.$objext"; then
- pre_test_object_deps_done=yes
- continue
- fi
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
- if test "$pre_test_object_deps_done" = no; then
- if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
- _LT_TAGVAR(predep_objects, $1)="$p"
- else
- _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
- fi
- else
- if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
- _LT_TAGVAR(postdep_objects, $1)="$p"
- else
- _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
- fi
- fi
- ;;
- *) ;; # Ignore the rest.
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible. Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+ [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
- esac
+m4_ifndef([AC_PROG_SED], [
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_SED. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for lt_ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+ fi
+ done
+ done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+ test ! -f $lt_ac_sed && continue
+ cat /dev/null > conftest.in
+ lt_ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+ # Check for GNU sed and select it if it is found.
+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+ lt_cv_path_SED=$lt_ac_sed
+ break
+ fi
+ while true; do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo >>conftest.nl
+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+ cmp -s conftest.out conftest.nl || break
+ # 10000 chars as input seems more than enough
+ test $lt_ac_count -gt 10 && break
+ lt_ac_count=`expr $lt_ac_count + 1`
+ if test $lt_ac_count -gt $lt_ac_max; then
+ lt_ac_max=$lt_ac_count
+ lt_cv_path_SED=$lt_ac_sed
+ fi
done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
- # Clean up.
- rm -f a.out a.exe
-else
- echo "libtool.m4: error: problem compiling $1 test program"
-fi
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
-$RM -f confest.$objext
-# PORTME: override above test on systems where it is broken
-m4_if([$1], [CXX],
-[case $host_os in
-interix[[3-9]]*)
- # Interix 3.5 installs completely hosed .la files for C++, so rather than
- # hack all around it, let's just trust "g++" to DTRT.
- _LT_TAGVAR(predep_objects,$1)=
- _LT_TAGVAR(postdep_objects,$1)=
- _LT_TAGVAR(postdeps,$1)=
- ;;
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
-linux*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
- if test "$solaris_use_stlport4" != yes; then
- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
;;
-
-solaris*)
- case $cc_basename in
- CC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- if test "$solaris_use_stlport4" != yes; then
- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
;;
esac
-])
-
-case " $_LT_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=
-if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-fi
-_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
- [The directories searched by this compiler when creating a shared library])
-_LT_TAGDECL([], [predep_objects], [1],
- [Dependencies to place before and after the objects being linked to
- create a shared library])
-_LT_TAGDECL([], [postdep_objects], [1])
-_LT_TAGDECL([], [predeps], [1])
-_LT_TAGDECL([], [postdeps], [1])
-_LT_TAGDECL([], [compiler_lib_search_path], [1],
- [The library search path used internally by the compiler when linking
- a shared library])
-])# _LT_SYS_HIDDEN_LIBDEPS
-
-
-# _LT_PROG_F77
-# ------------
-# Since AC_PROG_F77 is broken, in that it returns the empty string
-# if there is no fortran compiler, we have our own version here.
-m4_defun([_LT_PROG_F77],
-[
-pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
-AC_PROG_F77
-if test -z "$F77" || test "X$F77" = "Xno"; then
- _lt_disable_F77=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_F77
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_F77], [])
+# _LT_PROG_XSI_SHELLFNS
+# ---------------------
+# Bourne and XSI compatible variants of some useful shell functions.
+m4_defun([_LT_PROG_XSI_SHELLFNS],
+[case $xsi_shell in
+ yes)
+ cat << \_LT_EOF >> "$cfgfile"
-# _LT_LANG_F77_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a Fortran 77 compiler are
-# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_F77_CONFIG],
-[AC_REQUIRE([_LT_PROG_F77])dnl
-AC_LANG_PUSH(Fortran 77)
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+}
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+# func_basename file
+func_basename ()
+{
+ func_basename_result="${1##*/}"
+}
-# Source file extension for f77 test sources.
-ac_ext=f
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+ func_basename_result="${1##*/}"
+}
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary parameter first.
+ func_stripname_result=${3}
+ func_stripname_result=${func_stripname_result#"${1}"}
+ func_stripname_result=${func_stripname_result%"${2}"}
+}
-# No sense in running all these tests if we already determined that
-# the F77 compiler isn't working. Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_F77" != yes; then
- # Code to be used in simple compile tests
- lt_simple_compile_test_code="\
- subroutine t
- return
- end
-"
+# func_opt_split
+func_opt_split ()
+{
+ func_opt_split_opt=${1%%=*}
+ func_opt_split_arg=${1#*=}
+}
- # Code to be used in simple link tests
- lt_simple_link_test_code="\
- program t
- end
-"
+# func_lo2o object
+func_lo2o ()
+{
+ case ${1} in
+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+ *) func_lo2o_result=${1} ;;
+ esac
+}
- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
- _LT_TAG_COMPILER
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=${1%.*}.lo
+}
- # save warnings/boilerplate of simple test code
- _LT_COMPILER_BOILERPLATE
- _LT_LINKER_BOILERPLATE
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=$(( $[*] ))
+}
- # Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
- lt_save_GCC=$GCC
- CC=${F77-"f77"}
- compiler=$CC
- _LT_TAGVAR(compiler, $1)=$CC
- _LT_CC_BASENAME([$compiler])
- GCC=$G77
- if test -n "$compiler"; then
- AC_MSG_CHECKING([if libtool supports shared libraries])
- AC_MSG_RESULT([$can_build_shared])
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=${#1}
+}
- AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+_LT_EOF
+ ;;
+ *) # Bourne compatible functions.
+ cat << \_LT_EOF >> "$cfgfile"
- # On AIX, shared libraries and static libraries use the same namespace, and
- # are all built from PIC.
- case $host_os in
- aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
- aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
- esac
- AC_MSG_RESULT([$enable_shared])
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+}
- AC_MSG_CHECKING([whether to build static libraries])
- # Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
- AC_MSG_RESULT([$enable_static])
+# func_basename file
+func_basename ()
+{
+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
- _LT_TAGVAR(GCC, $1)="$G77"
- _LT_TAGVAR(LD, $1)="$LD"
+dnl func_dirname_and_basename
+dnl A portable version of this function is already defined in general.m4sh
+dnl so there is no need for it here.
- ## CAVEAT EMPTOR:
- ## There is no encapsulation within the following macros, do not change
- ## the running order or otherwise move them around unless you know exactly
- ## what you are doing...
- _LT_COMPILER_PIC($1)
- _LT_COMPILER_C_O($1)
- _LT_COMPILER_FILE_LOCKS($1)
- _LT_LINKER_SHLIBS($1)
- _LT_SYS_DYNAMIC_LINKER($1)
- _LT_LINKER_HARDCODE_LIBPATH($1)
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "X${3}" \
+ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "X${3}" \
+ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+ esac
+}
- _LT_CONFIG($1)
- fi # test -n "$compiler"
+# sed scripts:
+my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[[^=]]*=//'
- GCC=$lt_save_GCC
- CC="$lt_save_CC"
-fi # test "$_lt_disable_F77" != yes
+# func_opt_split
+func_opt_split ()
+{
+ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
-AC_LANG_POP
-])# _LT_LANG_F77_CONFIG
+# func_lo2o object
+func_lo2o ()
+{
+ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+}
-# _LT_PROG_FC
-# -----------
-# Since AC_PROG_FC is broken, in that it returns the empty string
-# if there is no fortran compiler, we have our own version here.
-m4_defun([_LT_PROG_FC],
-[
-pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
-AC_PROG_FC
-if test -z "$FC" || test "X$FC" = "Xno"; then
- _lt_disable_FC=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_FC
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=`expr "$[@]"`
+}
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_FC], [])
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+}
+_LT_EOF
+esac
-# _LT_LANG_FC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for a Fortran compiler are
-# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_FC_CONFIG],
-[AC_REQUIRE([_LT_PROG_FC])dnl
-AC_LANG_PUSH(Fortran)
+case $lt_shell_append in
+ yes)
+ cat << \_LT_EOF >> "$cfgfile"
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "$[1]+=\$[2]"
+}
+_LT_EOF
+ ;;
+ *)
+ cat << \_LT_EOF >> "$cfgfile"
-# Source file extension for fc test sources.
-ac_ext=${ac_fc_srcext-f}
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "$[1]=\$$[1]\$[2]"
+}
-# Object file extension for compiled fc test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
+_LT_EOF
+ ;;
+ esac
+])
-# No sense in running all these tests if we already determined that
-# the FC compiler isn't working. Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_FC" != yes; then
- # Code to be used in simple compile tests
- lt_simple_compile_test_code="\
- subroutine t
- return
- end
-"
+# Helper functions for option handling. -*- Autoconf -*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
- # Code to be used in simple link tests
- lt_simple_link_test_code="\
- program t
- end
-"
+# serial 6 ltoptions.m4
- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
- _LT_TAG_COMPILER
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
- # save warnings/boilerplate of simple test code
- _LT_COMPILER_BOILERPLATE
- _LT_LINKER_BOILERPLATE
- # Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
- lt_save_GCC=$GCC
- CC=${FC-"f95"}
- compiler=$CC
- GCC=$ac_cv_fc_compiler_gnu
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
- _LT_TAGVAR(compiler, $1)=$CC
- _LT_CC_BASENAME([$compiler])
- if test -n "$compiler"; then
- AC_MSG_CHECKING([if libtool supports shared libraries])
- AC_MSG_RESULT([$can_build_shared])
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it. Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+ _LT_MANGLE_DEFUN([$1], [$2]),
+ [m4_warning([Unknown $1 option `$2'])])[]dnl
+])
- AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
- # On AIX, shared libraries and static libraries use the same namespace, and
- # are all built from PIC.
- case $host_os in
- aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
- aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
- esac
- AC_MSG_RESULT([$enable_shared])
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
- AC_MSG_CHECKING([whether to build static libraries])
- # Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
- AC_MSG_RESULT([$enable_static])
- _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
- _LT_TAGVAR(LD, $1)="$LD"
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+ [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
- ## CAVEAT EMPTOR:
- ## There is no encapsulation within the following macros, do not change
- ## the running order or otherwise move them around unless you know exactly
- ## what you are doing...
- _LT_SYS_HIDDEN_LIBDEPS($1)
- _LT_COMPILER_PIC($1)
- _LT_COMPILER_C_O($1)
- _LT_COMPILER_FILE_LOCKS($1)
- _LT_LINKER_SHLIBS($1)
- _LT_SYS_DYNAMIC_LINKER($1)
- _LT_LINKER_HARDCODE_LIBPATH($1)
- _LT_CONFIG($1)
- fi # test -n "$compiler"
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME. If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [_LT_SET_OPTION([$1], _LT_Option)])
- GCC=$lt_save_GCC
- CC="$lt_save_CC"
-fi # test "$_lt_disable_FC" != yes
+m4_if([$1],[LT_INIT],[
+ dnl
+ dnl Simply set some default values (i.e off) if boolean options were not
+ dnl specified:
+ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+ ])
+ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+ ])
+ dnl
+ dnl If no reference was made to various pairs of opposing options, then
+ dnl we run the default mode handler for the pair. For example, if neither
+ dnl `shared' nor `disable-shared' was passed, we enable building of shared
+ dnl archives by default:
+ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+ [_LT_ENABLE_FAST_INSTALL])
+ ])
+])# _LT_SET_OPTIONS
-AC_LANG_POP
-])# _LT_LANG_FC_CONFIG
-# _LT_LANG_GCJ_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for the GNU Java Compiler compiler
-# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_GCJ_CONFIG],
-[AC_REQUIRE([LT_PROG_GCJ])dnl
-AC_LANG_SAVE
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
-# Source file extension for Java test sources.
-ac_ext=java
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `dlopen' option into LT_INIT's first parameter.])
+])
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-lt_save_GCC=$GCC
-GCC=yes
-CC=${GCJ-"gcj"}
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
-_LT_CC_BASENAME([$compiler])
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+ ;;
+esac
-if test -n "$compiler"; then
- _LT_COMPILER_NO_RTTI($1)
- _LT_COMPILER_PIC($1)
- _LT_COMPILER_C_O($1)
- _LT_COMPILER_FILE_LOCKS($1)
- _LT_LINKER_SHLIBS($1)
- _LT_LINKER_HARDCODE_LIBPATH($1)
+test -z "$AS" && AS=as
+_LT_DECL([], [AS], [0], [Assembler program])dnl
- _LT_CONFIG($1)
-fi
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
-AC_LANG_RESTORE
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
+])# win32-dll
-GCC=$lt_save_GCC
-CC="$lt_save_CC"
-])# _LT_LANG_GCJ_CONFIG
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `win32-dll' option into LT_INIT's first parameter.])
+])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
-# _LT_LANG_RC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for the Windows resource compiler
-# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_RC_CONFIG],
-[AC_REQUIRE([LT_PROG_RC])dnl
-AC_LANG_SAVE
-# Source file extension for RC test sources.
-ac_ext=rc
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the `shared' and
+# `disable-shared' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
+ _LT_DECL([build_libtool_libs], [enable_shared], [0],
+ [Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-lt_save_GCC=$GCC
-GCC=
-CC=${RC-"windres"}
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
-if test -n "$compiler"; then
- :
- _LT_CONFIG($1)
-fi
-GCC=$lt_save_GCC
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# _LT_LANG_RC_CONFIG
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the `static' and
+# `disable-static' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
-# LT_PROG_GCJ
-# -----------
-AC_DEFUN([LT_PROG_GCJ],
-[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
- [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
- [AC_CHECK_TOOL(GCJ, gcj,)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
- AC_SUBST(GCJFLAGS)])])[]dnl
-])
+ _LT_DECL([build_old_libs], [enable_static], [0],
+ [Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
-# Old name:
-AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
-# LT_PROG_RC
-# ----------
-AC_DEFUN([LT_PROG_RC],
-[AC_CHECK_TOOL(RC, windres,)
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
])
-# Old name:
-AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_RC], [])
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
-# _LT_DECL_EGREP
-# --------------
-# If we don't have a new enough Autoconf to choose the best grep
-# available, choose the one first in the user's PATH.
-m4_defun([_LT_DECL_EGREP],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_REQUIRE([AC_PROG_FGREP])dnl
-test -z "$GREP" && GREP=grep
-_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
-_LT_DECL([], [EGREP], [1], [An ERE matcher])
-_LT_DECL([], [FGREP], [1], [A literal string matcher])
-dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
-AC_SUBST([GREP])
-])
-# _LT_DECL_OBJDUMP
-# --------------
-# If we don't have a new enough Autoconf to choose the best objdump
-# available, choose the one first in the user's PATH.
-m4_defun([_LT_DECL_OBJDUMP],
-[AC_CHECK_TOOL(OBJDUMP, objdump, false)
-test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
-AC_SUBST([OBJDUMP])
-])
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the `fast-install'
+# and `disable-fast-install' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+_LT_DECL([fast_install], [enable_fast_install], [0],
+ [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
-# _LT_DECL_SED
-# ------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible. Prefer GNU sed if found.
-m4_defun([_LT_DECL_SED],
-[AC_PROG_SED
-test -z "$SED" && SED=sed
-Xsed="$SED -e 1s/^X//"
-_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
-_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
- [Sed that helps us avoid accidentally triggering echo(1) options like -n])
-])# _LT_DECL_SED
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
-m4_ifndef([AC_PROG_SED], [
-# NOTE: This macro has been submitted for inclusion into #
-# GNU Autoconf as AC_PROG_SED. When it is available in #
-# a released version of Autoconf we should remove this #
-# macro and use it instead. #
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `fast-install' option into LT_INIT's first parameter.])
+])
-m4_defun([AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for lt_ac_prog in sed gsed; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
- fi
- done
- done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
- cat /dev/null > conftest.in
- lt_ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
- # Check for GNU sed and select it if it is found.
- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
- lt_cv_path_SED=$lt_ac_sed
- break
- fi
- while true; do
- cat conftest.in conftest.in >conftest.tmp
- mv conftest.tmp conftest.in
- cp conftest.in conftest.nl
- echo >>conftest.nl
- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
- cmp -s conftest.out conftest.nl || break
- # 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
- lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
- lt_ac_max=$lt_ac_count
- lt_cv_path_SED=$lt_ac_sed
- fi
- done
-done
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `disable-fast-install' option into LT_INIT's first parameter.])
])
-SED=$lt_cv_path_SED
-AC_SUBST([SED])
-AC_MSG_RESULT([$SED])
-])#AC_PROG_SED
-])#m4_ifndef
-# Old name:
-AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_SED], [])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# LT_INIT options.
+# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+ [AS_HELP_STRING([--with-pic],
+ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+ [pic_mode="$withval"],
+ [pic_mode=default])
+test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
-# _LT_CHECK_SHELL_FEATURES
-# ------------------------
-# Find out whether the shell is Bourne or XSI compatible,
-# or has some other useful features.
-m4_defun([_LT_CHECK_SHELL_FEATURES],
-[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-AC_MSG_RESULT([$xsi_shell])
-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
-AC_MSG_CHECKING([whether the shell understands "+="])
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
- >/dev/null 2>&1 \
- && lt_shell_append=yes
-AC_MSG_RESULT([$lt_shell_append])
-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- lt_unset=unset
-else
- lt_unset=false
-fi
-_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `pic-only' option into LT_INIT's first parameter.])
+])
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
- # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
- lt_SP2NL='tr \040 \012'
- lt_NL2SP='tr \015\012 \040\040'
- ;;
- *) # EBCDIC based system
- lt_SP2NL='tr \100 \n'
- lt_NL2SP='tr \r\n \100\100'
- ;;
-esac
-_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
-_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
-])# _LT_CHECK_SHELL_FEATURES
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
-# _LT_PROG_XSI_SHELLFNS
-# ---------------------
-# Bourne and XSI compatible variants of some useful shell functions.
-m4_defun([_LT_PROG_XSI_SHELLFNS],
-[case $xsi_shell in
- yes)
- cat << \_LT_EOF >> "$cfgfile"
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+ [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+ [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+ [m4_define([_LTDL_MODE], [subproject])])
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
-}
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+ [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+ [m4_define([_LTDL_TYPE], [convenience])])
-# func_basename file
-func_basename ()
-{
- func_basename_result="${1##*/}"
-}
+# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-# dirname: Compute the dirname of FILE. If nonempty,
-# add APPEND to the result, otherwise set result
-# to NONDIR_REPLACEMENT.
-# value returned in "$func_dirname_result"
-# basename: Compute filename of FILE.
-# value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
- func_basename_result="${1##*/}"
-}
+# serial 6 ltsugar.m4
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-func_stripname ()
-{
- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
- # positional parameters, so assign one to ordinary parameter first.
- func_stripname_result=${3}
- func_stripname_result=${func_stripname_result#"${1}"}
- func_stripname_result=${func_stripname_result%"${2}"}
-}
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
-# func_opt_split
-func_opt_split ()
-{
- func_opt_split_opt=${1%%=*}
- func_opt_split_arg=${1#*=}
-}
-# func_lo2o object
-func_lo2o ()
-{
- case ${1} in
- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
- *) func_lo2o_result=${1} ;;
- esac
-}
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+ [$#], [2], [[$2]],
+ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=${1%.*}.lo
-}
-# func_arith arithmetic-term...
-func_arith ()
-{
- func_arith_result=$(( $[*] ))
-}
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59 which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+ [$#], 1, [],
+ [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=${#1}
-}
-_LT_EOF
- ;;
- *) # Bourne compatible functions.
- cat << \_LT_EOF >> "$cfgfile"
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
-}
-# func_basename file
-func_basename ()
-{
- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
-dnl func_dirname_and_basename
<![[patchlogo]](http://patch-tracker.debian.org/static/img/swirlpatch.png)